Top Otc Tools Ball Joint Press Kit

OTC CA7149 Ball Joint Connected Adapter Starter Kit

  • Patented connection and adapter design uses spring-loaded stainless steel ball bearings to securely attach connected cups and adapters to the C-frame and forcing screw.
  • Works with most OTC ball joint kits, cups and adapters.
  • Locking cups and adapters set up faster on the vehicle and leave one hand free.
  • Starter kit option (CA7149) includes 7 cups and adapters to work on more than 230 vehicles models, 38% more than the competition.
  • No O-Rings or removable fasteners to lose, damage or replace. For R&I of ball joints, U-joints, wheel studs and more.
Check Stock

6575 Hub Grappler Kit Used on Vehicle Wheel Hub and Bearing Removal & Installation

  • 「FUNCTION」This Hub Grappler Kit, replaces OTC 6575, which is the complete solution for servicing wheel hubs and bearings on the vehicle without removing the steering components or knuckle. It can eliminate unnecessary alignments or the use of a shop press, saving you time and energy!!.
  • 「A MUST HAVE」The Hub Grappler Puller is specifically designed to apply maximum force with minimal effort from an impact gun, which can minimize your serving time.
  • 「EASY TO USE」 3/4" custom drive screw coupled with the special equalizer washer provides smooth operation..
  • 「NICE DESIGN」 Jaws are designed and sized to properly fit hub applications and can be quickly located on the puller Bar without the use of fasteners..
  • 「UNIVERSAL FITS」 6 new adapters increases application coverage up to 2009 model year. Also includes tie rod/ball joint tool and 2 Ford axle installers..
Check Stock

DURATECH Heavy Duty Ball Joint Press & DURATECH 8-Piece Pliers Set

  • DURATECH Heavy Duty Ball Joint Press Including - 3 x Receiving Tubes, 1x Removal Adapter, 1x Installation Adapter, 1x Jackscrew, 1x Installing Cup Adapter, 1x Ball Joint Press, 1x Receiving Cup, 1x Installing Cup.
  • DURATECH 8-Piece Pliers Set Including - Oxford Rolling Pouch, 3-piece Groove Joint (12-Inch, 10-Inch, 8-Inch), 8-inch Adjustable Wrench, 8-inch Linesman, 6-inch Long Nose, 6-inch Slip Joint, 6-inch Diagonal are all included in this set.
  • DURATECH Heavy Duty Ball Joint Press - Fit most American domestic and imported 2-wheel drive (2WD) and 4-wheel drive (4WD) cars and light pickup trucks that have press-fit type ball joints, include 4-wheel drive (4WD) adapter. The Set also includes 4-wheel drive ball joint service kit that allows service for 1967 thru current 1/2 and 3/4 ton 4WD vehicles having the Dana 30 or 44 front axle (found on Ford, GM, Dodge, IHC and Jeep vehicles).
  • DURATECH Heavy Duty Ball Joint Press - Made from heavy-duty forged steel technology, through the Charpy impact test, black oxide coated on the adapter with a robot hands helps improve oxidation and corrosion resistance, ensuring durability and long life. It is even ideal for professional mechanics.
  • DURATECH 8-Piece Pliers Set - Professional forged Cr-V Steel & Cr-Ni Stee....
Check Stock

OTC CA6630 Ball Joint Connected Adapter Professional Kit

  • Patented connection and adapter design uses spring-loaded stainless steel ball bearings to securely attach connected cups and adapters to the C-frame and forcing screw.
  • Works with most OTC ball joint kits, cups and adapters.
  • Locking cups and adapters set up faster on the vehicle and leave one hand free.
  • Professional Kit option (CA6630) includes 25 cups and adapters to work on more than 600 vehicle models, 76% more vehicle models than the competition.
  • No O-Rings or removable fasteners to lose, damage or replace. For R&I of ball joints, U-joints, wheel studs and more.
Check Stock

OMT Master Ball Joint Press Kit, Ball Joint Removal Tool Kit for Ball Joint U Joint and Brake Anchor Pin Removal, 21pc Ball Joint Tool Set with Ball Joint Press and Universal Adapters

  • VERSATILE TOOL SET: Orion Motor Tech’s ball joint press kit lets you quickly and easily remove and install stubborn press fit parts, including ball joints, U joints, and brake anchor pins.
  • UNIVERSAL COMPATIBILITY: This ball joint tool kit includes 3 receiving tubes and 9 adapters to work with most 2 & 4-wheel drive cars, pickups, vans, and SUVs and is compatible with GM, Ford, Jeep, and Dodge since 1997.
  • DURABLE CONSTRUCTION: Our ball joint removal tool is made from premium AISI 1045 medium carbon steel that has been forged and coated to provide optimal corrosion resistance and durability for powerful leverage.
  • SAFE & SECURE: The 9 inch long C frame press with a 6 inch opening and extra long jackscrew provides even and straight force to let you smoothly press out joints without damaging other components.
  • EASY TO USE: This 21 piece ball joint tool set removes and installs press fit upper and lower joints without removing the control arms.
  • a custom molded case comes included for easy transport and storage between uses.
Check Stock

Orion Motor Tech OMT Ball Joint Press Kit, Ball Joint Removal Tool Kit for Ball Joint U Joint and Brake Anchor Pin Removal, 10pc Ball Joint Tool Set with Ball Joint Press and Universal Adapters

  • VERSATILE TOOL SET: Orion Motor Tech’s ball joint press kit lets you quickly and easily remove and install stubborn press fit parts, including ball joints, U joints, and brake anchor pins.
  • UNIVERSAL COMPATIBILITY: This ball joint tool kit includes adapters of common sizes to work with most 0.5 & 0.75 ton 4WD vehicles and is compatible with GM, Ford Jeep, Dodge, IHC since 1967.
  • DURABLE CONSTRUCTION: Our ball joint removal tool is made from premium AISI 1045 medium carbon steel that has been forged and coated to provide optimal corrosion resistance and durability for powerful leverage.
  • SAFE & SECURE: The 9 inch long C frame press with a 6 inch opening and extra long jackscrew provides even and straight force to let you smoothly press out joints without damaging other components.
  • EASY TO USE: This 10 piece ball joint tool set removes and installs press fit upper and lower joints without removing the control arms.
  • a custom molded case comes included for easy transport and storage between uses.
Check Stock

Heavy Duty Ball Joint Press & U Joint Removal Tool Kit with 4x4 Adapters, for Most 2WD and 4WD Cars and Light Trucks

  • ESSENTIAL TOOL FOR BALL JOINT SERVICE - Use the ORION MOTOR TECH Ball Joint Press Set Ball Joint Tool / Bushing Removal Tool with 4WD Adapter to effortlessly remove press fit parts including ball joints, U-joints, brake anchor pins, and more on most 2-wheel drive (2WD) and 4-wheel drive (4WD) vehicles without removing the control arm from the vehicle..
  • PROFESSIONAL GRADE QUALITY AND DURABILITY - Off road weekend warriors, novices, and professional mechanics trust the ORION kit because ORION MOTOR TECH sources the highest quality components from around the world. Constructed from heavy-duty forged steel with black-oxide finish on adapters for maximum strength and longevity that resists rust and corrosion..
  • UNIVERSALLY COMPATIBLE WITH A WIDE RANGE OF VEHICLES - Fit most American domestic and imported 2-wheel drive (2WD) and 4-wheel drive (4WD) cars and light pickup trucks that have press-fit type ball joints, include 4-wheel drive (4WD) adapter that allows service for 1967 thru current 1/2 and 3/4 ton 4WD vehicles having the Dana 30 or 44 front axle (found on Ford, GM, Dodge, IHC and Jeep vehicles)..
  • CONVENIENTLY ORGANIZED IN CUSTOM MOLDED CASE - Ball joint press / bushing/ removal tool kit is enclosed inside a heavy-duty 11” x 3” x 15” inch (2....
Check Stock

Sunluway 6575 Hub Grappler Kit for on Vehicle Wheel Hub and Bearing Removal & Installation

  • 【UNIVERSAL FITS】 6 new adapters increases application coverage up to 2009 model year. Also includes tie rod/ball joint tool and 2 Ford axle installers..
  • 【FUNCTION】This Hub Grappler Kit, replaces OTC 6575, which is the complete solution for servicing wheel hubs and bearings on the vehicle without removing the steering components or knuckle. It can eliminate unnecessary alignments or the use of a shop press, saving you time and energy!!.
  • 【PERFORMANCE】Jaws are designed and sized to properly fit hub applications and can be quickly located on the puller Bar without the use of fasteners.
  • 【EASY TO USE】 With 3/4" custom drive screw coupled with the special equalizer washer provides smooth operation. Easy to remove and install the front hub and bearing .Comes with Operation Manual..
  • 【A MUST HAVE】The Hub Grappler Puller is specifically designed to apply maximum force with minimal effort from an impact gun, which can minimize your serving time..
Check Stock

YSTOOL Front End Service Tool Set with Automotive Ball Joint Separator Tie Rod End Puller Pitman Arm Remover 5 PCS Removal Splitter Kit for Car SUV Light Truck Pickup

  • ...fore using for smooth operation and protect the bolt thread, grease them up after using for better preservation..
  • This ball joint puller kit includes 1x ball joint separator, 1x tie rod end and ball joint remover, 1x conical pitman arm puller, 1x pitman arm and tie rod end puller, 1x pitman arm puller, and all the 5 tools are organized in a red blow molding case for easy storage and transportation. The 5PCS remove tools use C-shape, jaw shape and teardrop shape design, very simple, but can seat on the ball joint position tightly and provide very effective grip to fix the pullers..
  • According to your ball joint choose the compatible puller, insert the puller into the ball joint opening, aim the bolt at the ball joint, turn the bolt by using the right size ratchet wrench, squeeze the ball joint out. These ball joint pullers can easily remove the stubborn ball joint, pitman arm, idler arm, tie rod end, steering linkages and steering boxes on front suspension and steering system, and will not damage boot/sleeve and other parts..
  • Ball joints require regular maintenance and replacement on average 75,000 to 150,000 miles or it may cause inconvenience and even safety hazards such as steering failure, instable driving and ball joint fracture. YSTOOL front en....
Check Stock

Orion Motor Tech OMT Heavy Duty Ball Joint Press & U Joint Removal Tool Kit with 4x4 Adapters, for Most 2WD and 4WD Cars and Light Trucks

  • 1.ESSENTIAL TOOL FOR BALL JOINT SERVICE - Use the ORION MOTOR TECH Ball Joint Press Set Ball Joint Tool / Bushing Removal Tool with 4WD Adapter to effortlessly remove press fit parts including ball joints, U-joints, brake anchor pins, and more on most 2-wheel drive (2WD) and 4-wheel drive (4WD) vehicles without removing the control arm from the vehicle..
  • 2.PROFESSIONAL GRADE QUALITY AND DURABILITY - Off road weekend warriors, novices, and professional mechanics trust the ORION kit because ORION MOTOR TECH sources the highest quality components from around the world. Constructed from heavy-duty forged steel with black-oxide finish on adapters for maximum strength and longevity that resists rust and corrosion..
  • 3.UNIVERSALLY COMPATIBLE WITH A WIDE RANGE OF VEHICLES - Fit most American domestic and imported 2-wheel drive (2WD) and 4-wheel drive (4WD) cars and light pickup trucks that have press-fit type ball joints, include 4-wheel drive (4WD) adapter that allows service for 1967 thru current 1/2 and 3/4 ton 4WD vehicles having the Dana 30 or 44 front axle (compatible with Ford, GM, Dodge, IHC and Jeep vehicles)..
Check Stock

Youxmoto Ball Joint Press Kit & U Joint Removal Tool Kit with 4x4 Adapters for Most 2WD and 4WD Cars and Light Trucks 10PCs

  • Must have for ball joint service: Ball Joint Press Set Ball Joint Tool / Bushing Removal Tool with 4WD Adapter to effortlessly remove press-fit parts....
  • We're different: Made from heavy-duty forged steel technology, through the Charpy impact test, Unlike the ball joint dismantling tools made of 45#....
  • Compatible with a wide range of vehicles: Fit most American domestic and imported 2-wheel drive (2WD) and 4-wheel drive (4WD) cars and light pickup....
  • Package includes: 3x Receiving Tubes, 1x Removal Adapter, 1x Installation Adapter, 1x Screw, 1x Install Cup Adapter, 1x Forcing-screw Press, 1x....
  • Worry-free shopping experience: If you have any questions, please do not hesitate to contact us. Every product enjoys a 24-hour response, a 30-day....
Check Stock

6575 Hub Grappler Kit Universal for Vehicle Wheel Hub and Bearing Removal & Installation

  • 【WIDE COMPATINILITY 】-- This Hub Grappler Kit, compatible with OTC 6575. Six adapters increase application coverage up to 2009 model year. Also includes tie rod/ball joint tool and two compatible with Ford axle installers. Comes with Operation Manual..
  • 【EXCELLENT FUCTION】-- This 6575 tool is a complete solution for that servicing wheel hubs and bearings on vehicle without removing the steering components or knuckle, eliminates unnecessary alignments or the use of a shop press. Minimize service time!.
  • 【SPECIFICALLY DESIGN】-- ①3/4'' custom drive screw, 5-10 times longer than similar designs, which with special equalizer washer provide smooth operation. ②Jaws designed and sized to property fit hub applications and is quickly located on the puller bar without the use of fasteners. ③ The puller is specifically designed to apply maximum force with minimal effort from an impact gun..
  • 【SUPERIOR MATERIAL】-- All parts made of solid carbon steel, proprietary heat treating extends its life while anti-rust finish resisting impact, corrosion and deformation. Mold-blown plastic case is convenience to carry ....
Check Stock