Top Outboard Motor Steering
Outboard Motor, 6hp Heavy Duty Boat Engine Fishing Boat Motor w/CDI System Water Cooling System (2 Stroke 6 hp)
- Short axle: axle length 381 mm (15 inches) suitable for boats below 44 cm(17.32inches) (inclusive) transom height.
- Hangkai two-stroke water-cooled outboard engine must put the machine in the water to start the machine to start (do not start the machine on shore).
- Hangkai two-stroke water-cooled outboard engine uses the specified two-stroke engine oil in strict accordance with the instructions Mix it with No. 87 gasoline and use it in the correct proportion. Do not use four-stroke engine oil, automobile engine oil, Gear Oil.
- Attention: It is strictly forbidden to start the machine on the shore. The two-stroke outboard engine should use a mixture of two-stroke engine oil and gasoline. The new machine is running in within 10 hours. The fuel ratio is 30L gasoline: 1L engine oil, and the ratio is oil after 10 hours. 50L: Oil 1L must ensure that gasoline and oil are fully mixed, otherwise it will damage the machine.
- The ignition system of this outboard motor has a CDI ignition system. So you can start the motor quickly and safely, which saves your time and is very convenient to use. This outboard adopts an international standard air intake system and compression ratio, which can effectively improve combustion efficiency and thus reduce fuel consumption. It....
Check StockOutboard Motor, 4 Stroke 4HP 52CC Heavy Duty Outboard Fishing Boat Motor Engine with Air Cooling CDI System for Inflatable Boat Kayak Canoe Sailboat
- 【4 Stroke 4HP Outboard Motor】- 4 Stroke 4HP Outboard Motor, superior engine air cooling CDI system to improve the reliability of the whole machine. Fuel saving, quick start, strong horsepower, superior performance, environmental protection and durable..
- 【Features】- Start-In-Gear protection/clutch feature prohibits prop rotation while idling.
- Features 360 degree steering rotation for reverse without gear shifting.
- Easy pull off engine cover with push button latch for instant motor access. Compact structure, heavy duty and easy to carry, anti-corrosive construction, forward and neutral design..
- 【Note】- Cylinder Scoring is a serious damage,which caused by improper use and will cost you a lot of money to repair it. To will avoid cylinder scoring, please NOTE the fellow: 1, Start the motor on bank.
- 2, Use the motor when it stop coming out of water, even if you want test the motor, it should be done in the river! When there is no water coming out from the motor,please stop using it immediately ,then check the impeller of Water pump or check if the water outlet has been blocked..
- 【Warm Tips】- 1.About the noise: all the gasoline machines are noisy, currently we did not test the decibel , but the noise is the same as the motorcycle, so it is a no....
Check StockGAOLEI 323CC Outboard Motor Boat Engine, 4 Stroke 20 HP Heavy Duty Outboard Motor Marine Inflatable Fish Boat Engine with Water Cooling System CDI Ignition(Black)
- [20 HP 4 Stroke Outboard Boat Motora]Air cooling technology To improve the reliability of the whole machine. Convenient use and easy operation, travel safer, more reliable, more corrosion resistant, more beautiful, more durable, more energy efficient, more environmentally friendly..
- [High Performance Motor] Model: 4 Stroke 20 HP.
- Displacement: 323CC, Gear Ratio: 2.08(27:13), Maximum Output Power: 14.7kw.
- Bore and Stroke: 59x59mm, Start System: Manual Start, Fuel: #92 Lead free gasoline.
- [Water Cooling CDI System]This outboard boat motor is equipped with its own engine water cooling system, allowing you to fish all day without overheating. Features 360 degree steering rotation for reverse without gear shifting. Twist grip throttle handle and engine stop button for improving response and saving time..
- [Durability]Vertically installed engine design can improve power, performance, Superior outboard anti corrosion system and anodes for increased durability. Durable cast alum....
Check StockSICAN New 2 Stroke 3.6HP Heavy Duty Outboard Motor Boat Engine w/Water Cooling System 52CC Boat Engine-Full Saltwater and Freshwater Compatibility
- 【DURABLE 】: Comparable Lubricating System For Four Stroke Outboard Engine Maneuverable and safe twist grip throttle control..
- 【SPEED 】: Depending on the actual load, it can travel about 10 to 16 nautical miles per hour. Speed: 5000-6000RPM (R / M), maximum output: 2.9kw....
- 【HIGH-QUALITY MOTOR 】: safer, more reliable, more corrosion-resistant, more beautiful, more durable, more energy-saving, and more environmentally....
- 【ADVANCED AIR COOLING SYSTEAM 】: The outboard boat motor is equipped with its own patented engine air cooling system, allowing you to fish all day....
- 【Performance&Application 】:Come with a 360°steering rotation, enabling you to reverse without changing gear. Offering a perfect balance of power....
Check StockHANGKAI 4 Stroke Outboard Motor, 4HP 4 Stroke 52CC Outboard Fishing Boat Motor Engine with Air Cooling CDI System for Inflatable Boat Kayak Canoe Sailboat USA STOCK
- 【4 Stroke 4HP Outboard Motor】- 4 Stroke 4HP Outboard Motor, superior engine air cooling CDI system to improve the reliability of the whole machine. Fuel saving, quick start, strong horsepower, superior performance, environmental protection and durable..
- 【More Safety And 2 Year Warrenty】- More Reliable,More Corrosion Resistant,More Beautiful,More Durable,More Energy Efficient,More Environmentally Friendly Modeling Luxury And Performance More Superior,Cheap,Curable,Easy Maintenance,Air Cooling Eliminates The Pump Section, Mo Longer Due To Water Quality Problems,Which Is Very Useful For Daily Use. About Certification We can only provide CE certification, there is no other certification can be provided,thanks for your understanding..
- 【Features】- Start-In-Gear protection/clutch feature prohibits prop rotation while idling.
- Features 360 degree steering rotation for reverse without gear shifting.
- Easy pull off engine cover with push button latch for instant motor access. Compact structure, heavy duty and easy to carry, anti-corrosive construction, forward and neutral design..
- 【Warm Tips】- 1.About the noise: all the gasoline machines are noisy, currently we did not test the decibel , but the noise is the same as the motorcycle, so it is a normal....
Check StockVEVOR Hydraulic Outboard Steering Kit 300HP, Hydraulic Steering Kit Helm Pump,Hydraulic Boat Steering Kit with 22 Feet Hydraulic Steering Hose for Boat Steering System
- Hydraulic Outboard Boat Steering Kit: The hydraulic outboard boat steering kit includes a steering cylinder, a steering pump, a 13.5" steering wheel, and a 22ft hose kit. It is a perfect replacement for your aging or broken equipment and becomes a good companion for your sailing trips..
- Aluminum Alloy Steering Cylinder: Output force: 468 KGF. Steering cylinders come with an upgraded sealing system for maximum protection from saltwater and compression set. Positionable stainless steel O-ring (ORB) fittings for easy hose routing. And the robust barrel is made of aluminum alloy, which is wear-resistant, corrosion-resistant, and does not fear seawater erosion..
- Max. 300HP Helm Pump: Max. Working pressure: 6.9 Mpa/1000 psi. The hydraulic pump has a replaceable shaft seal, built-in locking valve, relief valve, ORB fittings, and airbag. Allow you to use the equipment securely and conveniently..
- Nylon Hose & Steering Wheel: The 13.5" steering wheel is made of aluminum alloy and high-quality plastic. The 22" nylon hose with quick-fit 1/4 fitting is easy to install. And the hose can be cut to the desired length..
- Great Partner for Your Boat: Works for boats up to 60 MPH with single outboards up to 300 HP. Outboard-powered boats like the center console, offsho....
Check StockNewport Catalina Inflatable Boat - 12ft Marine Wood Floor,White/Gray
- ...horsepower). Inflatable tail tubes allow for great stability and quick take offs, while the inflatable keel allows for excellent planing and steering. Very portable and easy to assemble or disassemble in 10-15 minutes,..
- Features: Electric trolling motor compatible. 3-20hp Outboard Compatible (depending on model). Air Keel creates a shaped V hull for easy planing and improved steering. Sturdy carrying handles. 3x Stainless steel bow D-rings for towing. D-rings on bow/tail tubes for bimini & accessory attachments (not pictured). Self bailing transom drain valve. Easy grab rope + splash guard around edge limits water spray inside boat,..
- Premium quality: Hull made from high quality crisp white PVC fabric w/ UV treatment, .9mm/1100D. Floor made from aluminum framed marine grade coated plywood provides a solid and stable surface for standing, casting, and planing. Seams are HEAT WELDED using the latest technology,..
- Dimensions & capacity: Model: Catalina. Length: 12ft 6 in. Tube diameter: 18 in, Inflated width: 66 in. Chambers: 3 + 1 keel. Max Power: 20HP. Max Engine Weight: 115 lbs. Outboard Shaft: Short 15”-17”. M....
Check StockMophorn 150HP Hydraulic Outboard Steering Kit Boat Marine System
- 150 HP Hydraulic Steering Kit: The HK4200A-3 hydraulic outboard boat steering kit includes a balanced steering cylinder, a low-friction helm, two lengths of 20ft hose, and a fill kit. It will perfectly replace your aging or broken equipment..
- Built-in Two-way Lock Cylinder: Output force: 409.7 kgf. The cylinder has a built-in two-way locking valve, which eliminates rebound torque during torsion. The robust barrel design and the sealing system can withstand the harsh environment..
- Max. 150HP Helm Pump: Max. Working pressure: 6.9 Mpa/1000 psi. The low friction helm for smooth and comfortable steering. And it has a replaceable shaft seal that can be easily replaced..
- Cut-to-length Hoses: Our high-strength nylon hose is equipped with quick-fit 1/4'' pipe fitting for easy and fast installation and multiple re-uses. Each hose is 20' long and can be cut for your specific installation, accommodating most boats..
- Great Partner for Your Boat: Our hydraulic steering kit is for single-outboard powered boats rated up to 150 HP, including runabouts and inflatables — and outboard....
Check StockLEADALLWAY Outboard Boat Motor Stand Display Carrier Cart (Black Foldable Type)
- Easy to install and uninstall, collapsible, light weight outboard motor stand.
- Sturdy steel cart frame is capable to load 154lb, and the screw and pins on the carrier is made by 304 stainless steel.
- Ergonomic handles make the cart easy to steering and transport.
- Two 5.9 inches wheels fits for all terrains, which makes the motor transport more convenient.
- The carrier has mufti-purpose, which is not only for transport, but also for display and repairing.
Check StockLYNICESHOP Electric Outboard Motor, Electric Outboard Trolling Motor Boat Engine Long Shaft 48V 1000W Heavy Duty Trolling Electric Trolling Motor for Kayak Canoe Fishing Boat Small Yacht
- Electric Outboard Motor: Electric outboard trolling motor Model: DD-48V-1000W, Shaft length: 508mm(Suitable Electric Outboard Motor: Electric outboard motor Model: DD-48V-1000W, Shaft length: 508mm(Suitable for ships with stern plate 45-55 cm), Use voltage:48V, Current:18A, No-load Speed:3000 rpm, Recommended Battery: 48V 100A/3-4H, Product Weight:10.5KG, Power:1000W, Speed:15 KM /H, Gross Weight / Net Weight:10.5KG/13KG, Start Key:NO, Reverse Gear:NO..
- High Quality Materials: Electric outboard trolling motor is made of aluminum, light weight, good electrical conductivity, thermal conductivity, ductility and corrosion resistance, and pure copper core brushless motor, strong power, low energy consumption and long service life, aluminum alloy suspension bracket, 90° rotatable bracket, more stable and durable..
- Superior Performance: Electric outboard motor has ultra-low power consumption to maximize the use of your 48V battery, vertically mounted engine design for increased power, performance and durability, excellent outboard corrosion prevention system and anode for increased durability, suitable for small watercraft such as inflatable boats, canoes and aluminum fis....
Check StockDometic SeaStar Pro Hydraulic Steering Kit, HK7500A-3
- Hydraulic Steering Kit without hoses (ordered separately HO51xx where xx equals hose length in feet) for non-aggressively driven single outboard powered boats that do not exceed 75mph.
- Updated system includes O-ring boss rotational fittings for easy hose routing and new end gland sealing system for maximum protection from saltwater and compression set.
- Five turns lock-to-lock with 1.7 cu.in. helm (included) for maximum steering comfort.
- Robust Barrel Design and NEW Graphics compliment new boats and motor packages.
- Not recommended for boats that exceed 75mph or run surface piercing props or the power exceeds the maximum Coast Guard rating for the vessel.
Check StockTFCFL 2200W 10HP Electric Outboard Motor,60V Heavy Duty Outboard Motor Boat Engine with Air Cooling System,Inflatable Fishing Boat Engine,Brushless Motor Fishing Boat Engine Tiller Control
- ... 【High Quality】Our 2.2KW motor boat engine brushless motor is comed with a muffler works for the motor to decrease the noise.Anti-winding function when Increase the thickening of the propeller. Omni-directional rotary joystick.
- 【Air Cooling CDI System】This outboard boat motor is equipped with its own patented engine air cooling system, allowing you to fish all day without overheating. Features 360 degree steering rotation for reverse without gear shifting..
- 【Durable and Safety】Vertically installed engine design can improve power, performance and durability, high-quality carbonation system with ignition bulb can improve efficiency, twisting the throttle handle and engine stop button to improve Responsive, excellent outboard anti-corrosion system and anodes to improve durability.
- 【 Applications and Service】Perfect match inflatable boats, fishing boats, sailboats, and small yachts.Performance More Superior,quick start,positions the motor at several angles.We have our own overseas warehouse and a professional Customer Service Team to reply you within 24 hours. If you have any questions, please feel free....
Check Stock