Top Outdoor Ac High voltage Switch
LEONLITE RGBW LED Landscape Spotlight Bundle Wire Connectors, 8-Pack 12W RGBW Adjustable Angle Outdoor Waterproof Pathway Light, Aluminum Housing & 20-Pack Waterproof Wire Nuts, 22AWG-14AWG, Blue
- Bundle Includes: This bundle includes 8-Pack 12W RGBW LED outdoor landscape spotlight, adjustable angle pathway lighting, 12-15V AC/DC low voltage, IP65 waterproof, aluminum housing and 20-pack blue electrical twist seal elect wire nuts, 22AWG-14AWG, wet location available..
- [Low Voltage Landscape Floodlight] This 12-15V AC/DC low voltage LED landscape light only needs 12W to deliver 650lm of bright light, matching the output of a 120W incandescent light.
- [Low Voltage Landscape Floodlight] Press it once to turn the light on and turn it off by pressing and holding for 3 seconds. Gently press the button to switch the modes between 3000K warm white, white, red, green, blue, yellow, purple, flash, and fade. It can also memorize the last setting before being turned off. Under the same power use, this light is brighter and more transparent with RGBW technology.
- [Landscape Wire Connectors] This outdoor wire connector is compatible with 14AWG, 16AWG, 18AWG, 20AWG and 22AWG wires.
- [Landscape Wire Connectors] This wire connector can fully satisfy your needs for it withstands a maximum of 600V voltage.
Check StockAC Adapter for Lava HD-2605 Ultra Indoor Outdoor Remote Controlled HDTV Antenna
- Advanced Design, High Portability Brand New Replacement for Chargers.
- High Power exchange efficiency to control working temperature and stable working..
- POWER SPECS - Input Voltage: AC 110V Only.
- Over Voltage Protection, Over Heat Protection, FCC CE Certification.
- AC Adapter for Lava HD-2605 Ultra Indoor Outdoor Remote Controlled HDTV Antenna.
Check StockMiniature Current Switch,Current Sensing Switch,with Rails,Normally Open Amp Sensor Monitoring Relay AC 0-30A Detectable(M3050)
- ...A AC Rated load: [email protected] AC/DC..
- High Performance: The switch has no limit on the number of times of opening and closing, and the response speed reaches the millisecond level. The hysteresis is less than 1% and can be used under strong magnetic conditions. Through structure design, isolation withstand voltage up to 2000V..
- LED Indication: The action current is 0-30A AC, which can be adjusted by the potentiometer. The LED indicator light can easily and intuitively indicate the working status of the switch..
- ABS material: High-power MOS tube non-contact electronic switch is used, and the shell is made of self-extinguishing material ABS, which is heat-resistant, acid-alkali-resistant, high impact strength and stable in performance..
Check StockCurrent Transducer, SZT15-CH-420E Current Transducer Transmitter Transformer Sensor AC Current Converter 0-50A,Stable Performance
- 【DC Current Output Signal】 - The SZT15-CH-420E AC current transducer provides real-time isolated measurement of AC current in the grid or circuit and converts it to a 0-5V / 0-10V or 4-20mA DC current output signal ..
- 【Withstand Voltage】 - Through-heart structure design, insulation withstand voltage up to 2000V AC. The measured current AC: 0-10A / 20A / 50A can be selected..
- 【Usage】 - Magnetic hysteresis less than 1%, can be used in strong magnetic field conditions. The current transducer is used for AC current monitoring, detection, current overload protection, and is also used as an electronic switch for automatic control systems..
- 【High Performance】 - The outer casing is made of self-extinguishing material, it has the characteristics of strong overload ability, high precision, high isolation, high security, low power consumption and strong anti-interference ability..
- 【Easy To Installation】 - There is no need to connect the dc series into the circuit during measurement, safe isolation of input and output. It is suitable for various applications requiring current and voltage conversion..
Check StockSZC23-NO-AL-CH Current Switch Relay - Normally Open Current Sensing Switch Adjustable AC 0.2-30A
- 1. SELF-POWERED: Self-powered, no external power supply required..
- 2. CONTACTLESS ELECTRONIC SWITCH: High-power MOS tube contactless electronic switch..
- 3. STRUCTURE DESIGN: Straight-through structure design, isolation withstand voltage up to 2000V..
- 4. CONTACTLESS ELECTRONIC SWITCH: High-power MOS tube contactless electronic switch..
- 5. SUITABLE FOR: Suitable for AC current measurement and monitoring, AC motor overload protection, electronic switch of automatic control system and so on..
Check StockMalibu Low Voltage 1.3W LED Landscape Lighting for Garden, Path, Lawn, Patios Use
- 1.3W LED Landscape Flower Pathway Light: This flower pathway light use universal 12V AC low voltage safe working voltage, which can be applied to most low-voltage lighting systems. In addition, it only use 1.3W produces 45 Lumen of 3000K warm white, is ideal for outdoor installations, lighting pathway, garden, lawn, making this landscape light suitable for outdoor lighting.
- Low Voltage System: Working voltage 12V AC, compatible with most low voltage landscape lighting systems. This pathway flower light use high-quality, long-life LED chip, resulting in 75% less energy consumption than the average incandescent bulb. An additional low-voltage transformer is required for installation, and our Malibu low voltage transformer work with this low voltage pathway light will make your landscape lighting more convenient (EXTRA TRANSFORMER AND WIRE IS NOT INCLUDED).
- Safe & Durable: 12V AC safe working voltage, which means in case the cord are damaged, no one will be electrocuted! Safe for surrounding person or pets, you are no risk for outdoor using. Made of durable metal and glass that withstands extreme conditions, and is resistant to water, heat, wind, and dust, allowing it to withstand harsh weather conditions over time.
- Easy Installation: This low voltage land....
Check StockCurrent Sensing Switch/Relay,AC Current Sensing Switch 0-200A Normally Open Current Sensor Monitoring Relay,Linkage PLC Signal,Overload Controller M3080)
- ...A AC Rated load: [email protected] AC/DC..
- High Performance: The switch has no limit on the number of times of opening and closing, and the response speed reaches the millisecond level. The hysteresis is less than 1% and can be used under strong magnetic conditions. Through structure design, isolation withstand voltage up to 2000V..
- LED Indication: The action current is 0-200A AC, which can be adjusted by the potentiometer. The LED indicator light can easily and intuitively indicate the working status of the switch..
- ABS material: High-power MOS tube non-contact electronic switch is used, and the shell is made of self-extinguishing material ABS, which is heat-resistant, acid-alkali-resistant, high impact strength and stable in performance..
Check StockMalibu Low Voltage Landscape Lights 4W LED Telescoping Spotlights 12V Outdoor Oil Rubbed Bronze Lighting Kits 66 Lumen 2700K Warm White Floodlights with Stakes and Connectors 8406-2606-08
- 4W 8PK LED Landscape Telescoping Spotlights Kits: These telescoping spotlights use universal 12V AC low voltage safe working voltage, which can be applied to most low-voltage lighting systems. In addition, they are only use 4W produce 66 lumen of 2700K warm white, are ideal for outdoor installations, lighting tree, garden, making these landscape spotlights ideal for outdoor lighting.
- Safe & Durable: 12V AC safe working voltage, which means in case the cord are damaged, no one will be electrocuted! Safe for surrounding person or pets, you are no risk for outdoor using. The enclosed structure of these landscape spotlights are weatherproof, they are constructed of die-cast metal construction that are corrosion and weather resistant, allowing it to withstand harsh weather conditions over time.
- Easy Installation: These low voltage landscape spotlights includes 8 c cable connectors and 8 spike stakes. Compared with other complicated wiring methods, our spotlights can directly connect to low voltage cable, just place the connector on each side of the cable and press it to lock. And these landscape spotlights can be installed well by simply inserting the light pole into a suitable place (It is better to use A SHOVEL).
- Low Voltage System: Working voltage 12V AC,....
Check StockCurrent Switch, Self-Powered Current Sensing Switch SZC25-NO-AL-CH AC 0.5-50A Adjustable Normally Open Current Sensing Relay for Flash Buzzer Transformer Substation
- ...ectly control various automated chemical equipment..
- 【FAST RESPONSE & LED INDICATOR】The switch has no new limit, and the reaction speed reaches ms. The LED state indicator provides a convenient and intuitive representation of the operating status of the switch. Through-heart structure design, isolation withstand voltage up to 2000V..
- 【SELF-POWERED SENSING SWITCH】Self-powered, no external power supply required, high-power MOS tube non-contact electronic switch. The operating current of 0.5-50A AC can be adjusted by the potentiometer..
- 【WIDE APPLICATION】Widely used in substation, frequency conversion speed control device, inverter device, electrolytic plating, electric locomotive, street lamp monitoring, coal mine and other automation industries requiring current monitoring.It is an ideal choice for automated industrial equipment and store monitoring..
Check StockKONKIN BOO Replacement Ac Adapter for ViewTV Vilso TV VIEWTEK Esky Snap On Outdoor Amplified Antenna
- Advanced Design, High Portability Brand New Replacement for Chargers.
- High Power exchange efficiency to control working temperature and stable working..
- POWER SPECS - Input Voltage: AC 110V Only.
- Over Voltage Protection, Over Heat Protection, FCC CE Certification.
- Ac Adapter for ViewTV Vilso TV VIEWTEK Esky Snap On Outdoor Amplified Antenna.
Check StockAmpinvt 6000W Peak 18000W Pure Sine Wave Power Inverter Charger DC 48V to 120V/240V AC Output Converter Off Grid Low Frequency Solar Inverter for Sealed Gel AGM Flooded Lithium Battery
- 120/240 VAC Split Phase,Continuous 6000 Watt low frequency pure sine power inverter Peak 18000 watts off grid solar inverter,5msec typical transfer time.
- AC/Battery Priority: Our inverter is designed with AC priority by default, when AC input is present, the battery will be charged first, and the inverter will transfer the input AC to power the load. the inverter can be easily customized to Battery priority via a DIP switch, When you choose battery priority, the inverter will invert from battery despite the AC input..
- Adjustable charge current off-0%-100%, Five Stage Smart Charger, 35A battery AC charger max For lifep04,Sealed Gel AGM Flooded Lithium, Sealed, Gel, and Flooded Batteries.
- High-definition LCD display,full-vision real-time monitoring data,Remote panel available.
- charging current and charging voltage can be adjusted.
- customizable voltage for low voltage protection and voltage for low voltage recovery..
Check StockNormally Open Current Switch Adjustable Isolation The AC Current Monitoring Current Detection Protection AC 0.2-30A SZC23-NO-AL-CH
- Easy To Use: Current sensing switch is self-powered, requires no external power supply, operates at 0.2-30A AC, and can be adjusted with a potentiometer..
- Convenient And Intuitive: The switch does not limit the number of opening and closing, the reaction speed reaches ms level, and the LED indicator can indicate the working state of the switch..
- Accurate And Timely: Current switch is a straight-through structure design with isolation withstand voltages up to 2000V and hysteresis of less than 1%. It can be used under strong magnetic conditions..
- High Quality: High-power MOS tube non-contact electronic switch, the outer casing is made of self-extinguishing material ABS..
- Widely Used: it is suitable for AC current measurement and monitoring, AC motor overload protection, automatic control system electronic switch..
Check Stock