Top Output Module

SIEMENS 6ES7 214-1AG40-0xB0 SIMATIC S7-1200 CPU 1214C, Compact CPU

  • Programmable Control -- This module is programmable control, can achieve thousands of functions, stable and reliable working performance, built-in watchdog timer circuit, to ensure that the module for a long time to run Input high speed pulse C235, C251 and FX1N compatible.Output relay 1A output, Rated current 5A, can directly drive DC solenoid valve, AC solenoid valve, AC contactor, AC motor, etc..
  • Built-in Analog Input and Output -- Built-in Analog input AD, corresponding to internal data register D5030.(Not D8030) Built-in Analog output DA, corresponding to internal data register D5101..
  • The PLC with Two Programming Port -- The TTL interface and the 232 interface. The 232 interface, you can directly use the USB-232 serial port with a computer to download the program directly. When the PLC need to connect with the touch screen or text, can be used to conne....
Check Stock

AEDIKO 10pcs 2A 5V Charge Discharge Integrated Module 3.7V 4.2V for 18650 Lithium Battery Charging Boost Mobile Power Protection PCB Board

  • 2A 5V Lithium Battery Charging Protection Module:Output Voltage: 5V.
  • Charging Voltage: DC 4.5V-5.5V (DC 5V Recommended).
  • MCU Users: if You Accept a Small Load KEY Can be Connected to the Microcontroller about 20s to Provide a Low Level Allows the Module to Continue Working. Trigger Mode: Low Level Trigger (Ground).
  • Protection Functions: 4 in 1 Charging / Discharging / Lithium Battery Protection / Battery Level Indicator Module.Lithium Battery Protection Function:Over-Current Protection,Over-Voltage Protection, Over-Temperature Protection, Short Circuit Protection.
  • NOTE:The First Time the Load is Connected, Output is Automatically Turned On. If the Load is Less than 50MA, the Output will be Automatically Turned Off after 30s.
  • if the Load is Greater than 50MA, the Output Will be Automatically Turned On.
  • Application:2A 5V Module Widely Used for Mobile Power, Car Charging Retrofit,Driving Recorder Power Supply and Portable Devices Such As Mobile Phones and Tablets.
Check Stock

ALMOCN 12pcs 18650 18650 Lithium Li-ion Battery Charger Module 2A USB TP4056 Adjustable Boost Module DC-DC 3.7V to 5V 9V 12V Step Up Boost Module DIY Kit Parts

  • Output voltage: 4.3-27V DC (Continuously adjustable).
  • Battery charger module combines the TP4056 battery charger with a boost circuit. Adds a battery and converts a low power DC device to a USB rechargeable device..
  • Charging current: Max 1A, Discharging current: Max. 2A.
  • Instructions for use: TP4056 Charger Module can be used for multimeter to convert to charge lithium batteries. VIN+ port input 5V solar panel, BAT+ port can output 4.2V to charger 3.7V 18650 battery..
  • 2A USB 18650 Lithium Li-ion Battery Charger Module Adjustable Boost Module DC-DC 3.7V to 5V 9V 12V Step Up Boost Module TP4056 DIY Kit Parts.
Check Stock

5pcs HC-SR04 Ultrasonic Sensor Distance Sensor with Ultrasonic Transmitter and Receiver Module Compatible with Ar-duino UNO MEGA2560 Nano Robot XBee ZigBee

  • Induction Angle: not more than 15 degrees:....
  • the module HC-SR04 works: (1) IO trigger ranging to at least 10us high signal.
  • (2) module automatically sends eight 40kHz square wave, automatically....
  • Panel wiring, VCC, trig 's (control side), the echo (receiving end), out (empty feet), GND.
  • Note: TRIP-pin internal pull-up 10K resistor, down TRIP microcontroller IO port pin, and then to a 10us pulse signal..
  • OUT pin for this module as the switch output pin when the anti-theft module, ranging modules do not use this foot!.
Check Stock

Sound Module, Support Any Format Recording Module 10 Second Recording Easy To Use for Record Video

  • Sound sensor module have small volume and low output noise, the fixed gain is 20dB, support 3.3v and 5v.
  • Low power consumption of sensor is easy to control, more stable and more efficient.
  • The sound sensor is suitable for assembly, and installed on various small equipment like microphone and robot.
  • Microphone sound sensor module possess small size, more stable performance and simpler installation.
  • This module uses professional microphone amplifier IC, which possess high sensitivity.
Check Stock

DROK® LM2596 DC Buck Volt Regulator 36V to 24V 12V 5V 3.3V 3V Converters Constant Volt&Amp 5-36V to 1.25-32V 5A 75W Step-Down LED Driver Switch Power Supply Digital LED Voltmeter USB Output

  • Output voltage :1.25-32V continuously adjustable,default output 17V. Output Current : 5A MAX( Please use it within 4.5A).
  • Having a current limiting protection. Even if output short circuit, it will not burn module.
  • Use as an ordinary buck module with overcurrent protection capabilities.
  • Use it as a constant current LED driver module or a battery charger.
  • If its output is more than 3A/35W, please enhance heat dissipation!.
Check Stock

12V to 5V Direct Current Converter Buck Module USB Output Power Adapter Direct Current Power Adapter Converter Regulator Car Power Converter (3)

  • Parameter: these usb buck module input voltage range DC 12V and output voltage default DC 5V, the maximum output current is 3A, no-load current is 10mA and the maximum output power will reach 15W.
  • USB and high conversion: this DC to DC converter module has USB charging ports, DC to DC buck converter has integrated switch thin regulator module, the conversion rate is as high as 96%.
  • Intelligent protection: this 12V to 5V DC converter is using intelligent microprocessing chip, over voltage, over current, over temperature and short circuit, it can be auto protection.
  • Wide application: DC converter module 12V to 5V is widely applied for GPS navigation, driving recorder, electronic dog, car radio, MP3, MP4, walkie talkie, surveillance system, bus display, taxi advertising screen, LCD TV, LED, etc..
  • Warm prompt: the power of devices must be lower than 15W when using this DC to DC converter 12V to 5V, and not compatible with partial Samsung phones.
Check Stock

Bolsen HB100 Microwave Doppler Radar Wireless Module Motion Sensor HB100, Microwave Motion Sensor, Motion Detector

  • 【Doppler Technique Microwave Induction】: The RCWL-0516 Microwave Radar Sensor Module is equipped with Doppler radar technology which is specially designed for detecting objects' motion. With high anti-jamming capability that it'll not be affected by wind, heat or other environmental factors..
  • 【RCWL-9196 Chip】: Equipped with the special signal processing chip RCWL-9196, the radar sensor module has the features of high sensitivity, long sensing distance(5-7M), high reliability, wide detection angle and wide power supply voltage range(4.0-28.0V)..
  • 【5 Ports for Varying Needs 】: 3V3(3V3 Power Output).
  • OUT(Control output. It will output high level when detect moving objects).
  • OUT will output low level all the time when the power is lower than 0.7V).
  • 【Penetration Testing Capability】: Compared with the traditional infrared induction PIR, this sensor module has the penetration detection ability..
  • 【Package Inlcudes】: 5x RCWL-0516 Microwave Radar Motion Sensor as pictured..
Check Stock

12v to 5v Converter Buck Module USB Output Power Adapter Dc Power Adapter Converter Direct Current to Direct Current Regulator Car Power Converter (1)

  • Parameter: these usb buck module input voltage range DC 12V and output voltage default DC 5V, the maximum output current is 3A, no-load current is 10mA and the maximum output power will reach 15W.
  • USB and high conversion: this DC to DC converter module has USB charging ports, DC to DC buck converter has integrated switch thin regulator module, the conversion rate is as high as 96%.
  • Intelligent protection: this 12V to 5V DC converter is using intelligent microprocessing chip, over voltage, over current, over temperature and short circuit, it can be auto protection.
  • Wide application: DC converter module 12V to 5V is widely applied for GPS navigation, driving recorder, electronic dog, car radio, MP3, MP4, walkie talkie, surveillance system, bus display, taxi advertising screen, LCD TV, LED, etc..
  • Warm prompt: the power of devices must be lower than 15W when using this DC to DC converter 12V to 5V, and not compatible with partial Samsung phones.
Check Stock

DROK DC 24V to 12V CC CV Step Down Volts Regulator Constant Current Voltage 8A DC Adjustable Buck Converter 7-40V to 1.2-35V LED Driver Charger Module with Charging Indicator Solar Power Supply DIY

  • Module Properties: non-isolated step-down constant current , constant voltage module (CC CV) charging module.
  • Output voltage :DC 1.2-35V continuously adjustable.
  • Output Current: 8A ( when power tube's temperature exceeds 65 degrees, please add cooling fan ).
  • Constant current range :0.2-8A ( adjustable ).
  • Input 24V Output 12V 5A ripple around 50mV ( excluding noise ).
  • Application: High-power LED constant current driver, rechargeable lithium batteries (including ferroelectric), 4V, 6V, 12V, 14V, 24V rechargeable batteries, nickel-cadmium nickel-metal hydride batteries (battery pack) charging, solar panels, wind turbines.
Check Stock

Bridge Rectifier, 3Pcs AC to DC Power Conversion Module, 1N4007 Full Bridge Rectifier Filter Power Supply Module for Model Train Railroad LED (Input AC 6V-16V (capacitance 25V1000UF))

  • AC to DC power converter module, 1N4007 full wave bridge rectifier filter. Module size: 31x14x20mm/1.22x0.55x0.78inch, wire Length: 90mm/3.54inch..
  • This product is a streamlined rectifier filter module, widely used in small rectifier output filter, mainly used in the power requirements of the electrical is not very high..
  • The power module design can be put into a smaller small electrical box, the circuit Board above the design of power indicator light, easy to turn on the power supply can be intuitive to know the power status..
  • Rectified output voltage: output = input x1.414 . Example: input 12V AC, then the output 12x1.414 = 16.968V, which is the calculated result of no-load voltage, only a reference, the actual deviation..
  • Please NOTE: plug-in products, manual soldering, inconsistent capacitor pin height is a normal phenomenon. AC input voltage [6V-16V] (capacitance 25V1000UF).
  • AC input voltage [6V-32V] (capacitance 50V470UF), please seclect the one you need..
Check Stock

Legrand - On-Q CPT306W-V1 in-Wall TV Power & Cable Management Kit, Hides Power & AV Cables for Clean, Clutter-Free Installation

  • FLEXIBILE INSTALLATION: Gives you the freedom and flexibility to install any TV, anywhere in your home.
  • HIDES CABLES: Neatly conceal power, HDMI, coax and Cat5e behind the wall for a clean, uniform and expandable home solution.
  • UNIVERSAL COMPATIBILITY: Works with all TV brands CUSTOMIZABLE POWER OUTPUT MODULE works with most TV plugs including, Right Angle, Straight Type and Wide Over-Mold Plugs, straight type and wide over mold plugs, perfect for unique entertainment center applications.
  • CUSTOMIZABLE POWER OUTPUT MODULE works with most TV plugs including, Right Angle, Straight Type and Wide Over-Mold Plugs, straight type and wide over mold plugs, perfect for unique entertainment center applications.
  • KIT INCLUDES: Power Output Module (includes 6 ft. pre-wired cord), Power Input Module, Drywall Bracket, 6ft Power Cord, and cut-out Template with complete instruction guide.
Check Stock