Top Outside Diameter

Microwave Glass Tray Plate for Whirlpool 4393799 PS373741 AP3130793

  • Glass Turntable/Carousel tray for Kitchen Aid Microwave Ovens.
  • Measures 11-7/8" in diameter. Outside diameter of turntable track is 9 inches..
  • Outside diameter of turntable track is 9 inches..
  • This microwave plate replaces Kitchen Aid: 4393799 8206226.
  • This microwave tray fits the Kitchen Aid models listed below..
Check Stock

Kitchen Aid Glass Turntable Tray / Plate 11-7/8 4393799 by ERP

  • Glass Turntable/Carousel tray for Kitchen Aid Microwave Ovens.
  • Measures 11-7/8" in diameter. Outside diameter of turntable track is 9 inches..
  • Outside diameter of turntable track is 9 inches..
  • This microwave plate replaces Kitchen Aid: 4393799 8206226.
  • This microwave tray fits the Kitchen Aid models listed below..
Check Stock

McGard 78713 Stainless Steel Cragar Center Hole Mag Washer - Pack of 10,Silver

  • . 695" Inside Diameter, Outside Diameter 1. 224", Inside Diameter . 695", Thickness . 164".
  • Key tool features hex size for 1. 224" Outside Diameter sockets or lug wrench.
  • McGards Cragar Center Hole polished stainless steel washer are made to fit a wide range of wheel applications..
  • Please note that the Cragar Center hole washers are made to fit a wide range of wheel applications. If unsure please reach out to McGard before purchasing.
Check Stock

uxcell G3/4 25.7mm Male Thread Air Compressor Fittings Clear Plastic Oil Sight Glass

  • Thread Type : G3/4 (tested by G3/4 thread gauge exactly).
  • if you check by the caliper, the thread outside diameter approx 25.7mm.
  • Overall Size : 38 x 22mm/ 1.5" x 0.87" (D*T).
  • Package Content : 1 x Oil Level Sight Glass.
  • Notice Kindly: The male thread is G3/4 NOT G1, Please check the thread type and size carefully before you ordering.
  • If you need smaller size thread outside diameter about 3/4"(19.05mm), Pls choose our another model G1/2 products, the G1/2 male thread outside diameter is about 20.8mm(approx 3/4").
Check Stock

Bearing Buddy Chrome Bearing Protectors (1.781\ Diameter) With Bras - Pair

  • To determine the correct size, measure the outside diameter of the dust cap or the inside diameter of the hub with calipers. If it measures 1.781" then this is the correct size for your bearing.
  • Measure the outside diameter of the dust cap or the inside diameter of your hub with calipers. If it measures 1.781" then this is the correct Bearing Buddy size for you. If not, refer to the sizing images to find the correct size.
  • For use with 1.781 inches (49.99 mm) hub bore, Outer Bearing Cup: LM-11949, Outer Bearing Cup (race): LM-11910,.
  • Please see measurement instructions (secondary picture) to confirm correct sizing.
Check Stock

90 Degree Wall Mount Bracket with Tenon Mounting Accessory Steel Mount Lighting Accessory.

  • 90° Wall Mount adapter Bracket with 2-3/8" Outside Diameter Tenon. For use with attaching products such as a floodlight to almost any surface: wall,....
  • Provides wiring access and a built-in 2-3/8" Outside Diameter tenon to mount a fixture with an adjustable slipfitter..
  • Mounting holes are spaced 3-1/4" apart. Suggested 3/8" diameter bolts for mounting..
Check Stock

RIDGID 10973 122XL Copper Cutting and Prep Machine, 1/2-inch to 4-inch Pipe Cutting Machine

  • Designed to cut, clean and deburr copper tubing and fittings (Types K, L and M).
  • also cuts and deburrs stainless steel tubing with a maximum wall thickness of 0.065 inches (1.65 mm).
  • Rugged cast aluminum housing and powerful 1/3 HP induction motor for long tool life.
  • convenient carry handle for easy transport.
  • Reamer removes burrs from inside of tubing and brush cleans external surface to prepare for joining.
  • machine also includes accessories to clean inside of fittings and clean burrs from outside surface.
  • Copper pipe cutter has an adjustable handle to accommodate different diameter tubes and a handy built-in 1/2-inch (12 mm) incremental scale for quick and easy measuring.
  • Includes outside diameter cleaning brush, cone reamer, outside diameter deburring disk, fitting brush kit and operator's manual pack.
Check Stock

Floyutin 50 pcs M6x25mm(OD) Stainless Fender Flat Washer Large for Screw Hardware Lock

  • Note Size(Appr.): Metric flat washer assortment sets. M6 stands for the inside diameter of washer, means 6mm (1mm=.039 inch) in I.D. ALL washers are SAME thickness(1.5mm), and All washers with a wider outside diameter(25mm) Note Inside Diameter is the hole diameter, outside diameter is the round diameter..
  • Fast and Easy Use: Crush washers are round and flat with hole. Note the space between the lock nut and nut (1.5mm Thickness). All screws depends on the inside diameter. that means M4 washer fit with M4 screws/bolt shanks..
  • Multi-purpose Application: Commonly used in household. with threaded bolts, screws, nuts and flat finishing washers to tie together to prevent through. Build and repair furniture, digital products. and so on..
  • Including: Contains 50 pcs M6x25mm(OD) 304 Stainless steel flat washers.
  • Material: Made of high quality 304 stainless steel,no magnetic. Smooth polished surface, no sharp edges. rust and corrosion resistance, sturdy and durable..
Check Stock

2 Deluxe Universal Replacement Dusting Dust Brushes Black 1 1/4\ Natural Bristle

  • Our brush may doesn’t fit Shark vacuum..
  • Vacuum Brushes Inner diameter is standard 1-1/4" (32mm), This vacuum accessory will fit most household vacuum cleaners..
  • Connection Mode: The vacuum rod or hose of the vacuum cleaner is inserted into the brush,It is not suitable to insert the brush into the rod or hose..
  • The inside diameter of the brush is 1.25 inches,So the outside diameter of hose and vacuum wand connected to it need to be less than 1.25 inches,About 30.5mm(1.2inch) to 31mm(1.22inch)..
  • Please Note: Please measure the inner diameter of the original brush before ordering(1.25inch) or measure the outside diameter of the vacuum rod or hose(1.2inch to 1.22inch),The connection mode is that the vacuum rod or hose is inserted into the brush..
Check Stock

FSLMEIL Thread Protector kit 1/2x28  5/8x24 TPI with Free Crush Washer, All Steel Threaded (4 Pack)

  • [1/2x28 TPI Thread Protector]: Length: 0.589 inch / Inside diameter: 0.456 inch /Outside diameter: 0.738 inch /weight:0.03 lbWith one free 1/2x28 crush washer.
  • [5/8x24 TPI Thread Protector]: Length: 0.588 inch/ Inside diameter:0.581 inch /Outside diameter: 0.955 inch/ Weight:0.06 lbWith one free 5/8x24 crush washer.
  • [Installation and Material]: Won’t require any tools for installation.It is a nice flat black oxide finish..
  • [Packing List] :1X 1/2x28 Thread Protector,1X 5/8x24 Thread Protector,1X 1/2x28 Crush Washer,1X 5/8x24 Crush Washer,1X box.
Check Stock

MOSTPLUS 4 inch Inlet Exhaust Tip 4 Inlet 8 Outlet 15 Length Truck Diesel Exhaust Tip Black Stainless Steel Tailpipe Tip

  • ★FITMENT: Inside diameter inlet---4 Inch, Outside diameter outlet---8 Inch, Overall length---15 Inch.
  • ★MATERIAL: High qualified stainless steel material,durable and anti-corrosive. It will protect your original pipe from the sun and rain, avoid....
  • ★NOTE : It will fit 4inch outside diameter pipe, but will not fit 4 inch inside diameter pipe..
  • ★INSTALLATION - No weld and drill needed.Just fix the screw to the appropriate location of tailpipe by wrench..
  • ★Please check your car information before purchase..
Check Stock

O'SKOOL 4-Inch (Inside Diameter) to 2-1/4-Inch (Inside Diameter) Dust Collector Fitting Vacuum Tool Port Adapter

  • Includes: 4" to 2-1/4" Dust Hose Reducer Adapter Fitting x 1.
  • Durable ABS plastic end with 2-1/2" OD (outside diameter) and 2-1/4" ID(inside diameter) is perfectly suited for standard shop vacuum hoses..
  • Rubber boot(4" inside diameter ) and a hose clamp fit a 4" outside diameter power tool port..
  • ABS plastic port is tough and wear-resistant, which can extend the use time..
  • Rubber boot ensures tight fit, even variations in port size..
Check Stock