Top Oxy Acetylene Torch Kit

WeldingCity Heavy Duty Acetylene Heating Nozzle (Rosebud) MFA Series Size 8 (8-MFA) for Victor 300 Series Torch Handles

  • Premium quality brand-new one-piece type acetylene gas heating nozzle MFA series for Victor 300 series torches. Pack of one MFA nozzle..
  • Spiral mixer with double O-ring sealed to blend oxy-acetylene gas. Brass coupling nut with built-in snap ring. Total nozzle length: 12" (size 4 - size 8) and 17.5" (size 10). 65° elbow tip angle..
  • General purpose heavy duty multi-flame heating head for heat treating, straightening and priming with oxy-acetylene gas. Available nominal tip orifices: 4, 6, 8 and 10..
  • Work with Victor heavy duty 300 series torch handles and other aftermarkets gas handle versions..
  • U.S. based welding and hardware supplier. Strong technical support with experienced customer service to address buyer's any question..
Check Stock

Heavy Duty Cutting Torch, Oxygen Propane/Acetylene Welding Torch, Flame Torch Handle & Cutting Attachment with Propane Tip

  • 【HIGH PERFORMANCE】This cutting torch is mainly used to finish heavy duty work. With this kit to cut metal with thickness 1/8-inch to 5-inch and weld up to 3/8 inch, can easily finish the work ..
  • 【MULTIPLE GAS OPTIONS】 Cutting torch and handle are ready for multiple gas options.
  • Oxy-Acetylene, propane or other fuel. 2 fittings on the handle mix up oxygen and combustible gas through standard hose (inner Dia.6mm) to get cutting flame . The cutting nozzles may be different depends on the gas you are using.
  • 【HIGH QUALITY AND STABILITY】Adopts pure brass valve, stainless steel pressure handle, integrated adjustment handwheel and stainless steel stem to offer longer lifespan and higher precision . Built in non-return valve , more safety to use it ..
  • 【FULL SET】Full kit include torch handle,cutting torch and propane torch tip. Total assembled length 16inch (40mm), handle length 4.2 inch, which is very convenient to finish welding and cutting work..
  • 【WIDELY APPLICATION】Widely used in workshops, mechanical maintenance, cutting metal and welding ..
Check Stock

H&J Heavy Duty Acetylene & Oxygen Cutting Welding Torch Tool (300 series), Torch handle + Cutting attachment, with one piece Cutting Nozzle/Tip

  • High quality Heavy Duty Victor Type Oxygen/Acetylene Cutting Welding Torch Tool.
  • Constructed with high strength alloy, heavy duty stainless steel and durable brass.
  • Cutting torch and handle are ready for multiple gas options.
  • Oxy-Acetylene, Propane, Butane, Natural and LP Gases, and Propane.
  • Cuts 1/8-inch to 5-inch and welds up to 1/2-inch steel.
  • Package includes: 1 set of torch handle, 1 set of cutting attachment, 1 piece cutting tip.
Check Stock

RX WELD Air Acetylene Torch Kit Fuel Gas kit Professional Series

  • ...uction】 This cutting torch is constructed with high-quality alloy, stainless steel and durable brass for long-term use durability. The universal torch handle match perfectly with external thread type welding tips and is ergonomically designed for better grip and operation..
  • 【Excellent Performance】 The oxygen & acetylene welding cutting torch kit enables you to cut up to 6” and weld or braze up to 1/2” with appropriate tips. The operator can change the flame length according to his exact requirements by adjusting the oxygen and gas valves on the torch body..
  • 【Safe & Easy to Operate】 The acetylene torch kit control adjustments are easy to operate, making your welding job so much easier. The Oxygen & Acetylene regulator includes 2.5" diameter gauges to display accurate pressure, so you can easily adjust your gas flow rate with the built -in flow meter. The built-in check valves eliminate the reverse flow of gases, increasing safety..
  • 【Multiple Applications】 The torch kit is easy to handle and can be used in a wide range of fields. This welding torch tool set is a great choice for both an amateur metalworker or a professional. It's perfect for a multitude of applications such as farm, ranch, hobby metal store, construction site, automotive....
Check Stock

WeldingCity Medium Duty 1-piece Type Victor Style Acetylene Welding Brazing Nozzle 0-W-1 (Size 0) with W-1 Mixer for 100 Series Torch Handles

  • Premium Victor style acetylene gas welding/preheating/brazing nozzle W-1 series one-piece type for 100 series torch handles (not for J-100 series)..
  • Double O-ring sealed spiral mixer (W-1 type) blends oxy-acetylene gas. 65° elbow angle. Brass coupling nut with built-in snap ring..
  • Medium duty welding/preheating/brazing for use with oxygen-acetylene gas. Work with Victor light to medium duty 100 series (not J-100) torch handles such as 100C/100FC/WH26/WH260 and other aftermarkets versions..
  • Available nominal tip orifices: 000, 00, 0, 1, 2, 3, 4, 5, 6 and 7. Pack of 1 welding nozzle..
  • U.S. based welding and hardware supplier. Strong technical support with experienced customer service to address buyer's any question..
Check Stock

Hromee Oxygen Acetylene Hose 1/4-Inch × 50 Feet with 9/16”-18 B fittings Welding Cutting Torch Twin Hose

  • TWIN HOSE: The twin hose is designed for transporting oxygen and acetylene to your all oxy-acetylene welding, brazing, soldering and cutting equipment. The green line is for oxygen and the red line is for acetylene. It is grade R..
  • 1/4” × 50FT: The length of each welding hose is 50 feet. It is long enough for daily life use or industry and agriculture use. The inner diameter of hose is 1/4 inch(6.3mm) which supply optimal flow rate in the maximum pressure of 300 PSI (20Bar)..
  • HIGH QUALITY RUBBER: Hromee oxygen acetylene hose is made of acetylene rubber for maximum flexibility which is easy to store on reels and also helps increase the durability and resistance to kink. Other than these, it also can stay flexible in extreme temperature. All these make it ideal for long term use..
  • COLOR-CODED: Red and green two different colors make you distinguish them easily and allow for safe and accurate connections. Always be keen on the color-coding to ensure you know exactly how to put the connections during use..
  • B FITTINGS: We equipment B fittings in both ends which fits for most welding torch and regulators. Fitting Sizes: 9/16"-18 LH and 9/16"-18 RH..
Check Stock

Hromee Oxygen Acetylene Hose 1/4-Inch × 25 Feet with 9/16”-18 B fittings Welding Cutting Torch Twin Hose

  • TWIN HOSE: The twin hose is designed for transporting oxygen and acetylene to your all oxy-acetylene welding, brazing, soldering and cutting equipment. The green line is for oxygen and the red line is for acetylene. It is grade R..
  • 1/4” × 25FT: The length of each welding hose is 25 feet. It is long enough for daily life use or industry and agriculture use. The inner diameter of hose is 1/4 inch(6.3mm) which supply optimal flow rate in the maximum pressure of 300 PSI (20Bar)..
  • HIGH QUALITY RUBBER: Hromee oxygen acetylene hose is made of acetylene rubber for maximum flexibility which is easy to store on reels and also helps increase the durability and resistance to kink. Other than these, it also can stay flexible in extreme temperature. All these features make it ideal for long-term use..
  • COLOR-CODED: Red and green two different colors make you distinguish them easily and allow for safe and accurate connections. Always be keen on the color-coding to ensure you know exactly how to put the connections during use..
  • B FITTINGS: We equipment B fittings in both ends which fits for most welding torch and regulators. Fitting Sizes: 9/16"-18 LH and 9/16"-18 RH..
Check Stock

HARRIS SSBF5 Stay Silv Brazing Flux, 5 lb. Jar, Black

  • For general purpose brazing rod for repair of most ferrous and or non-ferrous metals.
  • For use with lawn equipment, sheet metal, tanks.
Check Stock

SÜA 25 Series Gas Welding & Cutting Kit Oxygen Torch Acetylene Welder Outfit

  • Medium/Heavy Duty Oxy-Fuel Welding & Cutting Outfit Compatible with Harris.
  • 25HX Series Oxygen and Acetylene Regulators. Torch Handle and Cutting Attachment Compatible with Harris. Can also be used with Oxygen-Propane using 6290-NX Series Propane Tips..
  • Included Acetylene Cutting Tip: 6290AC Size#2, (Can also use 6290 Series). Included Welding Tips: 23A90 Series #1, #3 and #5 with E-43 Mixer..
  • Can cut up to 1-1/2” with provided cutting tip and up to 6” with additional larger tips. Can weld up to 1/8” with provided welding tips and up to 1/4” with additional larger tips..
  • Accessories: 15 ft. Carrying bag, Twin Welding Hose, Tip Cleaner, Goggles, Spanner and Lighter.
Check Stock

Hot Max 24000 Brazing Flux Powder 8-Ounce

  • For all types of steel, malleable and cast iron, galvanized metals, brass, and bronze.
  • This flux is used for flame brazing with either an oxy-acetylene or electric carbon arc torch.
  • Active Temperature Range: 1400 to 2200 F (760 to 1205 C).
  • Meets AWS A5.31-91 Type FB3J Standards as well as MIL-F-16136B, Types A and B Standards.
  • Brazing Flux Powder comes in 8-Ounce container, Made in the USA.
Check Stock

Heyiarbeit 1 Set 13 in 1 Welding Tip Cleaner Nozzle Cleaner Gas Welding Brazing Cutting Torch Tip Cleaner Needle

  • [Special Designe]- The wires set with spiral knurling for cleaning common size jets and holes passages. This Carburetors Carbon Dirt Jet Remove Cleaner comes with a lightweight, compact aluminum carrying case, a practical tool are easy to carry and use..
  • [Material]- Made of high quality steel and comes with a lightweight, compact aluminum carrying case..
  • [Fuction]- This Carburetors Carbon Dirt Jet Remove Cleaner is particularly durable, not afraid of distortion. This high quality stainless steel cleaner set tool can clean out the tiny jets and carb passages from all dirt to help your machine running fine..
  • [Easy to Clean]- The Carburetor Cleaning Tool Kit is resuable cleaning tool. Particularly durable and easy to clean, can be reused.You can use these to clean shower/faucet heads of hard water build up..
  • [Wide Applications]- The Torch Tip Cleaner Set comes with different diameters helps you to reach out to the tiny jets and carb passages and remove all the dirt easily. Perfect for Cleaning Welding Cutting Nozzles, Oxy acetylene tip, Torch tip, Gas Orifices, Welding/Cutting tip,Carburetor jet,and Shower Heads..
Check Stock

Heyiarbeit 13 in 1 Welding Tip Cleaner Nozzle Cleaner Gas Welding Brazing Cutting Torch Tip Cleaner Needle 1 Set

  • [Special Designe]- The wires set with spiral knurling for cleaning common size jets and holes passages. This Carburetors Carbon Dirt Jet Remove Cleaner comes with a lightweight, compact aluminum carrying case, a practical tool are easy to carry and use..
  • [Material]- Made of high quality steel and comes with a lightweight, compact aluminum carrying case..
  • [Fuction]- This Carburetors Carbon Dirt Jet Remove Cleaner is particularly durable, not afraid of distortion. This high quality stainless steel cleaner set tool can clean out the tiny jets and carb passages from all dirt to help your machine running fine..
  • [Easy to Clean]- The Carburetor Cleaning Tool Kit is resuable cleaning tool. Particularly durable and easy to clean, can be reused.You can use these to clean shower/faucet heads of hard water build up..
  • [Wide Applications]- The Torch Tip Cleaner Set comes with different diameters helps you to reach out to the tiny jets and carb passages and remove all the dirt easily. Perfect for Cleaning Welding Cutting Nozzles, Oxy acetylene tip, Torch tip, Gas Orifices, Welding/Cutting tip,Carburetor jet,and Shower Heads..
Check Stock