Top Oxygen Analyzer For Welding

Goplus® 50ft Twin Welding Torch Hose Oxy Acetylene Oxygen Cutting 1/4-Inch 300psi

  • 【Compatible with Both Oxygen and Acetylene】 Our twin gas welding hose is color coded. The green one is for Oxygen and the red one is for Acetylene and fuel gas. What you should note here is that the maximum working pressure of our oxyacetylene twin welding hose is 300psi. Broken pressure up to 900psi..
  • 【High Quality Rubber Material】 Made of high quality rubber material, our rubber welding hose be used on extreme environment. Not only does it have excellent performance in low temperature, even in subzero temperatures, but also has good oil and abrasion resistance, which prolongs the life of the hose in a maximum effect..
  • 【Sufficient Length and Standard Diameter】 The whole length of each welding hose is 50 feet. It is long enough for daily life use or industry and agriculture use. Other than that, with standard diameter, 1/4”, our oxyacetylene twin welding hose has wide application, which meets most people’s needs..
  • 【Multifunctional Twin Welding Hose】 On the one hand, our twin welding hose can be used for welding machine. On the other hand, it has outstanding performance in gas cutting function, as well. Except for that, the twin gas welding hose can also be used for transporting gas, which is a good choice for industry and agriculture....
Check Stock

Lotus Analin Professional Tote Oxygen Acetylene Oxy Welding Cutting Torch Kit with tank

  • 4L Oxygen cylinder CGA5401pc / 2L Acetylene cylinder CGA5101pc.
  • welding tip # 1 and # 2 2pc / Oxygen regulator1pc.
  • Acetylene regulator1pc / Twin welding hose 4.5 meters 1set.
  • Tip cleaner 1pc / Welding goggle 1pc / Spanner 1pc / Spark lighter 1pc / Red tote 1pc.
Check Stock

3 Pack SÜA Welding Nozzle Replacement for 100 Series Victor Torch Handles Sizes 000 00 and 0

  • READ THIS BEFORE YOU BUY:***These tips are compatible ONLY with Victor 100 Series Welding Torch Handles - These Tips WILL NOT FIT Victor Series "300"....
  • READ THIS BEFORE YOU BUY: ***Check the picture Nº2 with the thread size and compare with your torch handle - If the thread size in Picture Nº2 does....
  • Welding / Brazing Tip with Mixer Replacement for "100" Series Victor torch handles - Gases: Oxygen/Acetylene and Oxygen/Hydrogen.
  • This is a General Purpose Welding and Brazing Tip manufactured in high-quality copper and brass. - Please Check Tip Chart Picture for Sizes, Welding....
  • Choose the Tip Size and Package Quantity from the "Size" Menu Options..
Check Stock

Stark USA 55147 Oxygen Acetylene Welder Tool Kit w/4 Nozzles Cutting Torch 15' Hose Gauge Regulators

  • Precision welding, cutting, brazing, soldering, hand facing and more! It'll cut up to 6" and weld or braze up to 1/2" with appropriate tips.Perfect for an Amateur Metalworker or a Seasoned Professional.
  • Various kinds using oxygen and gas fuel for portable welding, rivet cutting, soldering, brazing, hard-facing and metal heating process.
  • Deluxe single stage regulators with reverse flow check valves, brass torch handle and brass valve body for maximum strength and durability. Precision torch handle with dual check valves, cutting attachment and cutting tip (size No. 0).
  • A complete set includes a torch handle, oxygen regulator and acetylene regulator.
  • Victor-style welding kit includes multiple nozzles, hoses and fittings for all purpose welding, soldering, and other applications.
Check Stock

AWLOLWA Oxygen Acetylene Torch kit Medium Duty Cutting Torch and Welding Kit (Blue)

  • 【Oxy Acetylene Torch Kit】 The welding & cutting torch set are made of high-quality materials, which are durable to be your long-term choice. Whether you are an amateur metalworker or a seasoned professional, this gas welding torch kit is easy to use and allows you to cut, weld, braze, and solder with precision and efficiency.
  • 【Precision Design】The oxy acetylene torch kit enables you to cut up to 6” and weld or braze up to 1/2” with appropriate tips. Full 2 1/2” diam high capacity oxygen and acetylene regulators provide optimal performance. Acetylene Tank Connector: CGA-510 Fits all Acetylene Cylinders EXCEPT Sizes MC and B.
  • Oxygen Tank Connector: CGA-540 Fits all American Oxygen Cylinders..
  • 【Easy To Use】 To use this torch, attach the appropriate tip for your project, connect the oxygen and gas tank to the torch handle, and set the PSI to the necessary positions.
  • Once you have ignited and adjusted to a neutral flame, move the flame to the metal and push the valve handle slowly.
  • Move the torch tip slowly along the line of your cut until the metal has fully parted.
  • 【Versatile Use】Oxygen and acetylene fuels can be used in various types of portable welding, rivet cutting, soldering, brazing, surface hardening and metal heating processes.....
Check Stock

COLIBROX Professional Portable Oxygen Acetylene Oxy Welding Cutting Weld Torch Tank Kit

  • General Maintenance Work - Extremely Popular General Maintenance Work, Automotive Repair, Metal Sculpture, Air Conditioning, Refrigeration etc.
  • Ideal Use - For iron or steel welding, braze-welding, plus brazing, cutting, bending & forming.
  • Waterproof Storage Compartment - Carrier is made of tough, lightweight polypropylene.
  • Regulator Type - Rear entry regulators for better balance on the small cylinders Oxygen Regulator Type: (CGA540) Acetylene regulator Type: (CGA200).
  • Complete Set - Compatible gas-welding accessory kit includes a 20cu. ft oxygen tank and 10cu. ft acetylene tank with regulators, along with full brass torch assembly.
Check Stock

Oxy-Acetylene Welding Tip Series W-J Compatible with “J” Series Victor Ligth Duty Torches - Sizes #1, 2 and #3 (3-Pack)

  • READ THIS BEFORE YOU BUY:***These tips are compatible ONLY with Victor "J" Series Welding Handles - These Tips WILL NOT FIT Victor Series "100" or "300" Handles***.
  • READ THIS BEFORE YOU BUY: ***Check the picture Nº2 with the thread size and compare with your torch handle - These tips are ONLY compatible with "J" Series Light Duty Victor Welding Handles***.
  • Welding / Brazing Tip with Mixer Replacement for "J" Series Victor torch handles - Gases: Oxygen/Acetylene and Oxygen/Hydrogen.
  • This is a General Purpose Welding and Brazing Tip manufactured in high-quality copper and brass. - Please Check Tip Chart Picture for Sizes, Welding Capacity, and other operational parameters..
  • Choose the Tip Size and Package Quantity from the Available Options..
Check Stock

SÜA Oxygen and Acetylene Gas Cutting, Welding and Heating Set - Medium Duty Torch - Plastic Box - Model: Wyvern V

  • This Set includes: Oxygen and Acetylene Regulators, Medium Duty Torch with Model: 3-101-1 Acetylene Cutting Tip Compatible with Victor, 3 x W-1 series Welding Tips, Heating Tip, 15 feet Twin Hose, Single Flint Striker, Oxyfuel Goggles, Tip Cleaner and Spanner..
  • Can cut up to 6” with additional tips and up to 1” with the provided #1 tip. – Can weld or braze up to 1/2” with additional tips and up to 1/16” with the provided tips..
  • Acetylene Tank Connector: CGA-510 Fits Big Acetylene and Propane tanks EXCEPT Small Sizes MC and B (check all pictures for reference) - Oxygen Tank Connector: CGA-540 Fits all American Oxygen Cylinders..
  • Cutting attachment is compatible with Victor series 3 Acetylene and 3-GPN Propane Cutting Tips and Series 100 Handles. The Torch Handle is Compatible with W-1 Acetylene Welding Tips, MFA-1 Series Acetylene and MFN-1 Series Propane Rosebud Heating Tips..
  • This heavy-duty oxyfuel cutting and welding set is manufactured using high quality, strong materials. Durable and sturdy it is perfect for amateurs, DIY´s metalworker, or seasoned professionals, for industrial, farm, or home applications. Can be used on various processes such as welding, soldering, brazing, riveting, cutting, hard-facing and metal heating process..
Check Stock

SÜA 25 Series Gas Welding & Cutting Kit Oxygen Torch Acetylene Welder Outfit

  • Medium/Heavy Duty Oxy-Fuel Welding & Cutting Outfit Compatible with Harris.
  • 25HX Series Oxygen and Acetylene Regulators. Torch Handle and Cutting Attachment Compatible with Harris. Can also be used with Oxygen-Propane using 6290-NX Series Propane Tips..
  • Included Acetylene Cutting Tip: 6290AC Size#2, (Can also use 6290 Series). Included Welding Tips: 23A90 Series #1, #3 and #5 with E-43 Mixer..
  • Can cut up to 1-1/2” with provided cutting tip and up to 6” with additional larger tips. Can weld up to 1/8” with provided welding tips and up to 1/4” with additional larger tips..
  • Accessories: 15 ft. Carrying bag, Twin Welding Hose, Tip Cleaner, Goggles, Spanner and Lighter.
Check Stock

15 FEET GradeT - 1/4 OxyFuel Welding & Cutting Twin Hose with BB Fittings - SÃœA

  • Grade "T" Twin Wedling Hose for iots use with Propane, Alternative Fuel Gases and Acetylene.
  • Diameter: 1/4" Fittings: Type: B - B Size: 9/16"-18 LH for Fuel gas & Type: B - B Size: 9/16"-18 RH for Oxygen.
  • Grade "T" twin welding hose is specially designed to resist the effects of the oils in propane. It is also more weather-resistant..
  • Grade "T" Twin Fuel Gas Welding Hose is designed for transfer of many commonly used welding fuel gases and oxygen in applications to 200°F and 200 psi..
Check Stock

Biltek Dual Gauge Oxygen & Acetylene Solid Brass Regulator for Welding Victor Gas Torch Cutting - CGA540 and CGA200 Rear Mount Fitting

  • These Oxygen and Acetylene Regulators easily replaces the worn out regulators in your welding kit. An ideal item to have on hand for any welder..
  • Replacement Oxygen and Acetylene Regulators for Victor Style Welding Kits.
  • Single Stage Regulator with 2" Diameter Gauges.
  • Oxygen Outlet Pressure: 0-100 PSI | Acetylene Outlet Pressure: 0-30 PSI.
  • Compatibility: Fits Most Victor Style Torch Sets.
Check Stock

STKUSA Gas Welding and Cutting Torch Kit Victor Type

  • Perfect for welding, soldering, cutting, gauging and other applications.
  • Nozzle #1 and No. 0, 2, 4 Welding Nozzles.
  • A complete set includes a torch handle, oxygen regulator and acetylene regulator.
  • Victor-style welding kit includes multiple nozzles, hoses and fittings for all purpose welding, soldering, and other applications.
Check Stock