Top Oxygen Sensor Tool

ABN Oxygen 02 Sensor Socket 7-Piece Tool Kit – 22mm (7/8in), 27mm, 29mm – All Vehicle O2 Removal and Installation

  • NO MORE HASSLE: The ABN Oxygen 02 Sensor Socket 7-Piece Tool Kit – 22mm (7/8” Inches), 27mm, 29mm – All Vehicle O2 Removal and Installation is for inspection, removal, and installation of hard-to-reach oxygen sensors, oil pressure switches, oil pressure sending units, thermal sensor switches, vacuum switches, and brake light switches.
  • Each socket is permanently etched with size marking for your convenience.
  • MATCHES YOUR CAR: Universal fit for Audi, BMW, Citroen, Mercedes, Peugeot, Renault, Skoda, Vauxhall/Open (GM), and Volkswagen.
  • Sizes include 22mm (7/8”), 27mm, and 29mm.
  • For both heated and non-heated oxygen sensors.
  • Compatible with 3/8-inch and 1/2-inch ratchet drivers or extensions.
  • Side cutout sections allow the sockets to fit over wiring harness and prevent damage to wires.
  • BUILT TO LAST: Constructed from chrome-vanadium steel (CR-V) for extra strength and longevity.
  • Tools have a light coating of oil to protect them from rusting.
  • EASY STORAGE: Heavy-duty 9” x 2.25” x 8” inch (22.9cm x 5.7cm x 20.3cm) plastic blow-molded carrying case for easy transportation, safe storage, and quick organization.
  • CONTENTS: Package includes (1) 29mm pressure/vacuum switch 6pt socket + (1) 22mm (7/8 inch) vacuum switch 6pt socket + (1) 22mm (7/8 inch) v....
Check Stock

ITEQ 5 Pcs Automotive Oxygen Sensor Socket Wrench Remover Tool and Thread Chaser Set

  • Perfect tool set for removing, inspecting, replacing and installing heated and non heated oxygen sensors and vacuum switches on most vehicles with computer-controlled engines.
  • 3 types of universal socket wrenchs cover various situations of oxygen sensor location.
  • 6-point 7/8” (22mm) socket opening fits all hexagon oxygen sensor, common 3/8” and 1/2” drive ends can be used with ratchet or breaker bar.
  • Special side cutout design allows easy access to oxygen sensors from any section and prevents damage to wires.
  • Set Including: 1-pc 3/8” Dr. extra deep broach socket (3-1/8” long), 1-pc 3/8” Dr. low-profile crowfoot socket wrench (1-1/4” long), 1-pc 1/2” Dr. offset crowfoot socket wrench (1-15/16” long), 1-pc M18 x 1.5mm and 1-pc M12 x 1.25mm thread chasers with 3/8” drive to clean and repair damaged threads.
Check Stock

3/8-Inch Drive Oxygen Sensor Socket Offset Wrench Remover Tool

  • PackageIncludes 2 7/8" 3/8 Inch Drive Vacuum Switch Sockets and One 7/8" x 1/2" drive Oxygen Sensor Socket.
  • Design Standard 6 point with low profile and slotted design to enable you remove oxygen sensors with the wiring harness still attached, and the socket is offset and compact which allows extra leverage even in hard to reach spots..
  • Material Made from high performance chrome molybdenum and solid cast steel construction for strength and durability - Finished with Black Oxide to prevent rust..
  • Usage Built for use with ratchets and breakers bars to remove and install oxygen sensors and hex vacuum switches on vehicle, even if you don't have a lot of experience working with cars. This high quality tool can save your time!.
  • Service 100% satisfaction guarantee, If you have any issues with the oxygen sensor socket, simply contact customer service for troubleshooting help, parts, replacement, or refund. Our aim is to make you satisfy the parts and the service we provide for you..
Check Stock

3/8-Inch Drive Oxygen Sensor Socket Offset Wrench Remover Tool fits All Vehicle O2 Removal and Installation Universal Puller and Removal Tool

  • REMOVE OXYGEN SENSORS FROM YOUR VEHICLE: This 10 Piece Specialty Sockets O2 Sensor Tool Set lets you quickly and easily remove oxygen sensors, oil pressure sending unit, fuel injectors, and vacuum switches.
  • Some O2 socket pieces feature cutout sides to prevent damage to wires and tubes.
  • Remove and install parts on most domestic and some international vehicles.
  • USE WITH YOUR TOOLS: Features 3/8-inch or 1/2-inch square drive to fit your O2 sensor wrench drives.
  • For use with ratchet, breaker bar, or hand wrench (driver tools not included).
  • Use this tool in conjunction with the O2 Sensor Thread Chasers to install new sensors easily (thread chaser and sensors not included).
  • BUILT TO LAST: Constructed of heat-treated chrome vanadium steel, this oxygen sensor remover set is built for strength, durability, and longevity.
  • Each 02 sensor socket is coated with a black oxide finish to provide resistance to rust and corrosion.
  • CONTENTS: This specialty tools set includes 10 pieces: 1/2 inch dr x 22mm x 6PT x 110mm, 1/2 inch dr x 29mm x 6PT x 90mm, 1/2 inch dr x 22mm x 12PT x 78mm, 1/2 inch dr x 27mm x 12PT x 78mm, 1/2 inch dr x 28mm x 12PT x 78mm, 1/2 inch dr x 7/8” x 50mm, 3/8 inch dr x 7/8” x 6PT x 80mm, 3/8 inch dr x 7/8” x ....
Check Stock

EWK 22mm 7/8 Inch O2 Oxygen Sensor Flex Head Wrench Removal Tool

  • 【 Flexible Operation 】Goes into narrow space and odd angles with the unique contour handle. EWK oxygen sensor removal tool works around the exhaust and gets to places ordinary wrenches won't. Easy to remove or install the hard-to-reach and stuck O2 sensors..
  • 【 Extra Leverage 】Swiveled head helps create extra leverage in narrow areas. The 22mm oxygen sensor wrench helps getting additional clearance during the job. Effortlessly turns the removal job into a breeze..
  • 【 Slotted Design 】 Get to the O2 sensor from the side to prevent damaging the wire or the sensor. Keeping the wire harness attached by getting to the sensor from the side instead of from the top..
  • 【 Great Compatibility 】EWK O2 sensor remover is designed to work on 7/8″(22mm) O2 sensors. Compatible for Ford contours, 4.6L, 5.4L Ford modular engines. Covers most vehicles on the market..
  • 【 EWK Assurance】Excellent WorKing experience guaranteed! EWK provides you premium quality tools and the best service with 12 months warranty. If there is any problem or concern with our products, please contact us for assistance..
Check Stock

Tribus Tools Oxygen and NOx Sensor Wrench (15/16\)

  • [SIZE]: 3 piece 3/8 & 1/2" drive O2 oxygen sensor wrench socket tool set.
  • universal 7/8"/22mm professional grade removal tool for cars & automotive.
  • [ITEM INCLUDES]: 1 vacuum switch socket & 2 puller sockets kit.
  • [MATERIAL]: Constructed of high performance (cr-v & cr-mo) vanadium and chrome molybdenum solid cast steel for strength and durability - finished with black oxide to prevent rust.
  • [APPLICATION]: Remove and install oxygen sensors and hex vacuum switches on vehicles.
  • [PACKAGE]: Packed in a blow-molded storage case.
Check Stock

WYNNsky Oxygen Sensor Remover Set, Oxygen Sensor & Oil Pressure Sending Unit Master Sensor Socket Set, 7 Pieces O2 Sensor Socket Set

  • Application: This socket set is designed for the removal inspection or replacement of heated and non-heated oxygen sensors fitted to the following vehicle Audi, BMW, Citroen, Mercedes, Peugeot, Renault, Skoda. These sockets feature cut-away sections allow some sockets to fit over wiring harnesses, complete with the black phosphate finish for a durable design..
  • 3/8’’ Drive × 7/8’’ ×1/2’’ Oxygen Sensor Socket/Vacuum Switch Socket removes and installs vacuum switch with a 7/8’’ hex and some oxygen sensors.
  • 3/8’’ Drive × 7/8’’ × 3-1/8‘’ oxygen sensor socket removes and installs oxygen sensors in domestic and many import vehicles. Slot in socket for wire clearance..
  • 1/2’’ Drive ×1-3/16’’ ×3-1/2’’ vacuum switch socket removes oil pressure sending units on late 80’s to mid 90’s GM models.
  • 1/2’’ Drive ×1-1/16’’ × 3-1/4’’ thermal sensor switch socket removes and installs thermal sensor switch on 1973-1977 CM vehicles.
  • 3/8’’ Drive ×1’’ and 1-1/16’’ ×3’’ remove oil pressure sending units. Deep design fits switches up to 2-5/8’’..
  • 1/2’’ drive ×7/8’’ ×2’’ heated oxygen sensor sockets slot in socket accommodates connectors on heated oxygen sensors.
Check Stock

8MILELAKE 21pcs Oxygen Sensor Socket Set Sensor Oil Pressure Sending Unit Socket Set

  • Ideal for the removal and installation of oxygen sensors, oil pressure sending units, oil pressure switches, vacuum switches equipped and thermal sensor switches.
  • Slotted design allows removing oxygen sensor with wiring harness attached and prevents damage to wires.
  • Heavy duty Forged sockets constructed from Chrome Vanadium alloy steel with black finish for lasting lifetime.
  • The perfect tool kit for the professional mechanic or DIY enthusiast..
  • All the tools are well organized in a blow molded case for easy transportation, simple storage, and quick identification..
Check Stock

Oxygen Sensor Replace OE Part # Bosch 17014 17315 Upstream Oxygen Sensor

  • Fitments: The 17014 oxygen sensor is fit for 2004-2006 Rolls-Royce. Please double check the fitment before your purchase. And you can get a more....
  • Replace OE #: The Apeixoto oxygen sensor is designed and manufactured with OE standard and can be replaced directly with fitted vehicles. The....
  • Function: Oxygen sensor is a key part to reduce the harmful emission and the increase the fuel efficiency. The Apeixoto oxygen sensor is wrapped with....
  • Solid Quality: Every sensor is 100% tested before shipping..
  • Warranty: You are backed by our Performance Assurance. this oxygen sensor comes with 30 Days HASSLE-FREE RETURN & 1 Year / 12 months unlimited....
Check Stock

Walker Products 350-34039 Oxygen Sensor Original Equipment Replacement Downstream Upstream O2 Sensor 1 Pack

  • Walker Products Oxygen Sensor Program is the Industry Leading OEM and Aftermarket Oxygen Sensor ( O2 Sensor ) Program.
  • Walker O2 Sensor is Manufactured to meet and exceed OE specifications.
  • increase fuel efficiency, decrease emissions,....
  • Backed by Walker Products buyer protection for worry free installation and performance.
  • Fitment: 2001-2020 Chrysler Dodge Jeep Mercedes-Benz Mitsubishi Ram Volkswagen Oxygen Sensor O2 Sensor.
  • Replacement: 15510 Oxygen Sensor, 234-4547.
Check Stock

MARSFLUX Oxygen O2 Sensor Compatible with 2003-2007 Upstream Front or Rear 5-Wires

  • 【Compatible】O2 Oxygen Sensor Compatible with 2003-2007 Upstream Front or Rear 5-Wires. OE:250-25001. Please enter the year, make and model number....
  • 【Professional Manufacturing】 O2 oxygen sensor is manufactured in strict ance with the original standard, stable performance, excellent....
  • 【Excellent Quality】 The oxygen sensor is simple to install, easy to use, plug and play, and can directly replace the old or damaged ones,....
  • 【Operating Principle】The role of the oxygen sensor is to determine whether there is excess oxygen in the exhaust after engine combustion and to....
  • 【Fast Shipping & Warranty Commitment】O2 oxygen sensor shipped directly from the USA within 2~5 working days, warranty 2 years. Please enter the....
Check Stock

15717 Oxygen Sensor Replacement for Lincoln Ford F150 Explorer Ranger Mustang Aston Martin Mazda Tribute Mercury at Downstream or Upstream Position with OE Bosch 15717

  • Fitments: 15717 oxygen sensor is fit for 2000 - 2004 Aston Martin DB7, 1990 - 1996 Ford Bronco, 1992 - 2011 Ford Crown Victoria, 2003 - 2014 Ford....
  • Replace OE Part #: The 15717 oxygen sensor is designed and manufactured with the OE standard. The interchange part # : 15717, 15716,15718....
  • Function: Oxygen sensor is a key part to reduce the harmful emission and the increase the fuel efficiency. The Apeixoto oxygen sensor is wrapped with....
  • Solid Quality: Every sensor is 100% tested before shipping. And please NOTE that this 15717 oxygen sensor has two types of connectors ( black &....
  • Warranty: You are backed by our Performance Assurance. this oxygen sensor comes with 30 Days HASSLE-FREE RETURN & 1 Year / 12 months unlimited....
Check Stock