Top Parting Wall Lock

THINBIT 3 Pack LGPT045D2R 'L' Series, Uncoated Carbide, Parting Insert for Steel, Cast Iron and Stainless Steel with Interrupted Cuts

  • See Downloads section below item photos for detailed product information, technical information and compatible toolholders..
  • Narrow widths reduce material loss and part deflection. Perfect for precious metals, thin wall tubing and small diameter parts. Cuts flush to collet face or shoulder on main spindle side using M03 or sub-spindle side using M04..
  • Use for parting solid stock up to 1.000" or tubing with wall thickness up to .500"..
  • Uncoated DURA-MAX 2000 carbide parting insert for steel, cast iron and stainless steel with interrupted cuts..
  • Use with Large series toolholders. Use RH straight or LH 90 degree toolholder..
Check Stock

THINBIT 3 Pack LGPT025D5R 'L' Series, Uncoated Carbide, Parting Insert for Non-Ferrous Alloys, Aluminium and Plastic Without Interrupted Cuts

  • See Downloads section below item photos for detailed product information, technical information and compatible toolholders..
  • Narrow widths reduce material loss and part deflection. Perfect for precious metals, thin wall tubing and small diameter parts. Cuts flush to collet face or shoulder on main spindle side using M03 or sub-spindle side using M04..
  • Use for parting solid stock up to .400" or tubing with wall thickness up to .200"..
  • Uncoated DURA-MAX 5000 carbide parting insert for non-ferrous alloys, aluminium and plastic without interrupted cuts..
  • Use with Large series toolholders. Use RH straight or LH 90 degree toolholder..
Check Stock

THINBIT 3 Pack LGPT062D5R 'L' Series, Uncoated Carbide, Parting Insert for Non-Ferrous Alloys, Aluminium and Plastic Without Interrupted Cuts

  • See Downloads section below item photos for detailed product information, technical information and compatible toolholders..
  • Narrow widths reduce material loss and part deflection. Perfect for precious metals, thin wall tubing and small diameter parts. Cuts flush to collet face or shoulder on main spindle side using M03 or sub-spindle side using M04..
  • Use for parting solid stock up to 1.000" or tubing with wall thickness up to .500"..
  • Uncoated DURA-MAX 5000 carbide parting insert for non-ferrous alloys, aluminium and plastic without interrupted cuts..
  • Use with Large series toolholders. Use RH straight or LH 90 degree toolholder..
Check Stock

CDBP GTN-4 (SP400) CNC Grooving Carbide Inserts Steel Fit for SPB426/36 Lathe Grooving Metal Cutting Tools, 10pcs

  • Size, SP400, Width(B): 4.14mm, Radius(R): 0.25mm, Longth(L): 11mm.
  • General material for parting and grooving processing, a nanocomposite coating of a AITiSi base, high temperature stability, good hardness. Small friction coefficient, reduce the adhesion between workpiece and insert cutting edge..
  • Soft material parting processing is preferred, sharp cutting edge, low cutting force, low and medium-speed feed processing, pipe fittings, thin-wall parts and small parts processing..
  • Long processing life, competitive price, high cost performance, with better working, suitable for stailess steel, carbon steel and heat-resistant steel processing. range, A high the thermal shock resistance, suitable for light interrupted cuts..
  • CDBP multifunctional tools can be used in different applications, such as parting, grooving, turning, end face and profiling machining. Unique installation and chip-breaker can ensure excellent performance and production efficiency..
Check Stock

THINBIT 3 Pack LGPT025D5R7R 'L' Series, Uncoated Carbide, Parting Insert for Non-Ferrous Alloys, Aluminium and Plastic Without Interrupted Cuts

  • See Downloads section below item photos for detailed product information, technical information and compatible toolholders..
  • Narrow widths reduce material loss and part deflection. Perfect for precious metals, thin wall tubing and small diameter parts. Cuts flush to collet face or shoulder on main spindle side using M03 or sub-spindle side using M04..
  • Use for parting solid stock up to .400" or tubing with wall thickness up to .200"..
  • Uncoated DURA-MAX 5000 carbide parting insert for non-ferrous alloys, aluminium and plastic without interrupted cuts..
  • Use with Large series toolholders. Use RH straight or LH 90 degree toolholder..
Check Stock

THINBIT 3 Pack LGPT062D5R7R 'L' Series, Uncoated Carbide, Parting Insert for Non-Ferrous Alloys, Aluminium and Plastic Without Interrupted Cuts

  • See Downloads section below item photos for detailed product information, technical information and compatible toolholders..
  • Narrow widths reduce material loss and part deflection. Perfect for precious metals, thin wall tubing and small diameter parts. Cuts flush to collet face or shoulder on main spindle side using M03 or sub-spindle side using M04..
  • Use for parting solid stock up to 1.000" or tubing with wall thickness up to .500"..
  • Uncoated DURA-MAX 5000 carbide parting insert for non-ferrous alloys, aluminium and plastic without interrupted cuts..
  • Use with Large series toolholders. Use RH straight or LH 90 degree toolholder..
Check Stock

THINBIT 3 Pack LGPT045D5R7R 'L' Series, Uncoated Carbide, Parting Insert for Non-Ferrous Alloys, Aluminium and Plastic Without Interrupted Cuts

  • See Downloads section below item photos for detailed product information, technical information and compatible toolholders..
  • Narrow widths reduce material loss and part deflection. Perfect for precious metals, thin wall tubing and small diameter parts. Cuts flush to collet face or shoulder on main spindle side using M03 or sub-spindle side using M04..
  • Use for parting solid stock up to 1.000" or tubing with wall thickness up to .500"..
  • Uncoated DURA-MAX 5000 carbide parting insert for non-ferrous alloys, aluminium and plastic without interrupted cuts..
  • Use with Large series toolholders. Use RH straight or LH 90 degree toolholder..
Check Stock

CDBP Carbide Grooving Inserts MGMN400-M for MGEHR/L and MGIVR/L Grooving Cut-Off Tool Holder, Installed with KOLORY, PVD Coating Metal Cutting, 10pcs

  • Size, MGMN400-M, Width(B): 4mm, Radius(R): 0.4mm, Longth(L): 21mm, Dimension(D): 3.3mm, Thickness(S): 4.8mm.
  • General material for parting and grooving processing, a nanocomposite coating of a AITiSi base, high temperature stability, good hardness. Small friction coefficient, reduce the adhesion between workpiece and insert cutting edge..
  • Soft material parting processing is preferred, sharp cutting edge, low cutting force, low and medium-speed feed processing, pipe fittings, thin-wall parts and small parts processing..
  • Long processing life, competitive price, high cost performance, with better working, suitable for stailess steel, carbon steel and heat-resistant steel processing. range, A high the thermal shock resistance, suitable for light interrupted cuts..
  • CDBP multifunctional tools can be used in different applications, such as parting, grooving, turning, end face and profiling machining. Unique installation and chip-breaker can ensure excellent performance and production efficiency..
Check Stock

Value Plastic SMTLL-J1A Luer Tube Fitting Threaded Adapter Male Luer Integral Lock Ring X 1/4-28 UNF Thread, Natural Kynar PVDF (pack of 25)

  • Coupler with angled barbs for connecting pipes or tubing in a straight run.
  • Fitting has a male luer lock on one end and a barbed connector on the other.
  • Polypropylene for chemical resistance and dimensional stability.
  • Luer lock with integral ring for secured, leak-free connection.
  • Barb lacks parting lines, ensuring a leak-free union with tubing.
  • Meets ROHS standards for quality assurance.
Check Stock

CDBP GTN-2 (SP200) CNC Grooving Carbide Inserts Steel Fit for SPB226/232 Lathe Grooving Cutting Tools, CVD Yellow Coating, 10pcs

  • Size, SP200,Width(B): 2.18mm, Radius(R): 0.2mm, Longth(L): 8.9mm, fit for Korloy grooving holder..
  • CVD coated yellow color grade, universal grade, suitable for steel and cast iron continuous cutting and interrupted cutting.
  • Soft material parting processing is preferred, sharp cutting edge, low cutting force, low and medium-speed feed processing, pipe fittings, thin-wall parts and small parts processing..
  • Long processing life, competitive price, high cost performance, with better working, suitable for stailess steel, carbon steel and heat-resistant steel processing. A high the thermal shock resistance, suitable for light interrupted cuts..
  • CDBP multifunctional tools can be used in different applications, such as parting, grooving, turning, end face and profiling machining. Unique installation and chip-breaker can ensure excellent performance and production efficiency..
Check Stock

CDBP GTN-4 (SP400) CNC Grooving Carbide Inserts Steel Fit for SPB426/32 Lathe Grooving Cutting Tools, CVD Yellow Coating, 10pcs (BP400-P)

  • Size, SP400,Width(B): 4.14mm, Radius(R): 0.25mm, Longth(L): 11mm, fit for Korloy grooving holder..
  • CVD coated yellow color grade, universal grade, suitable for steel and cast iron continuous cutting and interrupted cutting finishing to roughing. Grade with a wide range of applications. Stainless steel continuous cutting and interrupted cutting..
  • Soft material parting processing is preferred, sharp cutting edge, low cutting force, low and medium-speed feed processing, pipe fittings, thin-wall parts and small parts processing..
  • Long processing life, competitive price, high cost performance, with better working, suitable for stailess steel, carbon steel and heat-resistant steel processing. A high the thermal shock resistance, suitable for light interrupted cuts..
  • CDBP multifunctional tools can be used in different applications, such as parting, grooving, turning, end face and profiling machining. Unique installation and chip-breaker can ensure excellent performance and production efficiency..
Check Stock

CDBP Carbide Grooving Inserts MRMN400-M for MGEHR/L and MGIVR/L Grooving Cut-Off Tool Holder, Installed with KOLORY, CVD Yellow Coating, 10pcs

  • Size, MRMN400-M, Width(B): 4mm, Radius(R): 2mm, Longth(L): 21mm, High(S): 4.8mm..
  • CVD coated yellow color grade, universal grade, suitable for steel and cast iron continuous cutting and interrupted cutting finishing to roughing. Grade with a wide range of applications. Stainless steel continuous cutting and interrupted cutting..
  • Soft material parting processing is preferred, sharp cutting edge, low cutting force, low and medium-speed feed processing, pipe fittings, thin-wall parts and small parts processing..
  • Long processing life, competitive price, high cost performance, with better working, suitable for stailess steel, carbon steel and heat-resistant steel processing. A high the thermal shock resistance, suitable for light interrupted cuts..
  • CDBP multifunctional tools can be used in different applications, such as parting, grooving, turning, end face and profiling machining. Unique installation and chip-breaker can ensure excellent performance and production efficiency..
Check Stock