Top Pass Filter

Anti-Interference High Reliability 433MHz New Denoise Bandpass Filter BPF SMA Interface for Block Frequencies

  • Power supply EMI filter is a kind of reactance-type low-pass filter, installed at the power supply input of electronic equipment..
  • It can inhibit noise transmitted through grid power cable, and can inhibit high-frequency interference signals generated by the electronic device itself..
  • High quality imported components provide obvious filtering effect..
  • EMI has become a must have device installed in electronic equipment..
Check Stock

NVX QBUS8P 300W Peak (150W RMS) Amplified and Loaded 8' Ported Under Seat Quick Bass Universal Subwoofer System with Remote Bass Knob

  • Space Saver - The combination of a built-in 300W amplifier that powers the 8” subwoofer makes this ideal for spatially challenged vehicles..
  • Variable Low-Pass Filter - A low-pass filter is an electronic circuit that removes all the notes below the filter's frequency setting. You will use the low-pass filter to primarily keep high notes out of your subwoofer. Adjust it from 50-150 Hz to best fit your system..
  • Ease of installation - Takes either speaker wire (High-level) or RCA cable (low-level) inputs. This makes connecting the QBUS8P to your radio easier since it's compatible with both factory AND aftermarket units!.
  • Automatic Turn-On - This circuit automatically turns the QBUS8P on whenever it senses an audio signal. This eliminates the need to run a remote turn on wire making installation a breeze..
  • Variable Bass Boost - Variable Bass Boost allows you to adjust the low bass within the boost range to just the way you like it..
Check Stock

Alpine Electronics S-A32F 4 Channel Amplifier

  • Rms power bridged 2 x 160 W @ 4 Ohms: 14.4V.
  • Class D (digital) amplifier.Channels: 4/3/2 channel (stereo).Temperature monitoring.Automatic switch-on Function.Crossover: adjustable low pass filter (LPF)/ high pass filter (Hpf).
Check Stock

SFB-1000D - Sundown Audio Monoblock 1750w RMS Amplifier…

  • Features: Monoblock Class D Amplifier. Power Handling: Maximum Output Power at 14.4V DC 1-Ohm: 3000W RMS | Maximum Output Power at 14.4V DC 2-Ohm:....
  • Crossover: High Pass Filter: 15 to 80Hz (-12dB/8) Variable | Low Pass Filter: 80Hz to Full (-12dB/8) Variable. Bass Boost: 0 to 12dB (50Hz), Thermal....
Check Stock

JBL Stage A6004 4-Channel 50W X 4 Full Range Amplifier

  • General specifications Power output90wx4@4ohms frequency response20-20khz±1db thd@rop1%.
  • Input Sensitivity0.2V-5v high Pass filter, variable32-320hz low Pass filter, variable32-320hz bass eq@45hz0-12db protectiondc, OVP, UVP, OCP, OTP.
Check Stock

Sound Storm EV5000D Car Amplifier – 5000 Watts Max Power 1 Ohm Stable Class D Monoblock MOSFET Power Supply Remote Subwoofer Control

  • POWER: Maximum Power Output of 5000 Watts at 1 Ohms into one channel. Maximum Power output of 2500 Watts at 2 Ohms into one Channel. This amplifier is....
  • HIGH LEVEL INPUTS: Speaker level inputs are commonly referred to as high-level inputs. This input will be used to connect the EV5000D to your factory....
  • LOW LEVEL INPUTS: Line level inputs, also known as RCA inputs or low-level inputs, use RCA interconnect cables to link the EV5000D with the source....
  • LOW-PASS CROSSOVER: A low-pass filter is an electronic circuit that removes all the notes below the filter's frequency setting. A low-pass filter will....
  • VARIABLE BASS BOOST: Variable Bass Boost allows you to adjust the low bass within the boost range to just the way you like it.
Check Stock

MTX Audio JH7005 Jackhammer Series 700W 5-Channel Class-AB + D Car Audio Amplifier

  • 4 Ohm: 60 watts x 4 ch. + 275 watts x 1 ch. | 2 Ohm: 90 watts x 4 ch. + 450 watts x 1 ch. | 4 Ohm Bridged: 180 watts x 2 ch..
  • Frequency Response: 20Hz - 20,000Hz (Main Channels) + 20Hz - 250Hz (Subwoofer Channel) | High Pass Filter (Variable): 40Hz - 250Hz 12dB/Oct | Low Pass Filter (Variable): 40Hz - 250Hz 12dB/Oct.
  • Subsonic Filter (Variable): 20Hz - 50Hz 12dB/Oct | Bass Boost (0 - 12dB): 45Hz.
Check Stock

WKDUN C8 365nm 5W UV Flashlight Torch in Leak Detection, Forensics, Law Enforcement, Coating Inspection, Fugitive Glue, Curing, Special Effects, Urine Displays, Exhibits and More Long Version

  • 365nm long wave UV LED with ZWB2 black filter to absorb the visible light while allowing a high percentage of the UV to pass through..
  • Use C8 365nm UV flashlight in leak detection, forensics, law enforcement, coating inspection, fugitive glue, UV Curing, special effects, urine detection, displays, exhibits and more..
  • IPX6 Waterproof: Full metal made body garuantees the tactical torch rust resistant & shock resistant, suitable for all kinds of weather, whether fog or rain..
  • Long Version C8 flashlight can work by 1pcs or 2 pcs 18650 batteries. batteries are not included in the listing. You need prepare the batteries by yourself.
  • All flashlight come with ZWB2 black filter.ZWB2 Filter is a kind of black glass that has a good pass through of the 365nm waveband ultraviolet rays, but other wavebands cannot pass through. Its function is to filter out stray light and ensure that the light coming out is pure 365nm ultraviolet light so that the light color is purer and the fluorescence effect is better..
Check Stock

Planet Audio AC1500.1M Monoblock Car Amplifier - 1500 Watts Max Power 2/4 Ohm Stable Class A/B Mosfet Power Supply Remote Subwoofer Control

  • power: max power output of 1500 watts at 2 ohms into one channel. maximum power output of 750 watts at 4 ohms into one channel. this amplifier is....
  • high level inputs: speaker level inputs are commonly referred to as high-level inputs. this input will be used to connect the ac1500.1m to your....
  • low level inputs: line level inputs, also known as rca inputs or low-level inputs, use rca interconnect cables to link the ac1500.1m with the source....
  • low-pass crossover: a low-pass filter is an electronic circuit that removes all the notes below the filter's frequency setting. a low-pass filter will....
  • variable bass boost: variable bass boost allows you to adjust the low bass within the boost range to just the way you like it.
Check Stock

ALPINE KTA-450 400w 4-Channel Amplifier Small Footprint Saddlebag Motorcycle Amp

  • Rms power bridged 2 x 160 W @ 4 Ohms: 14.4V.
  • Class D (digital) amplifier.Channels: 4/3/2 channel (stereo).Temperature monitoring.Automatic switch-on Function.Crossover: adjustable low pass filter (LPF)/ high pass filter (Hpf).
Check Stock

Rockville RBG18S 18' 2000W Active Powered PA Subwoofer W/Dsp+Limiter Pro/DJ

  • Built-in Amplifier - With a MOSFET power supply you get improved switching speeds, better performance with less power from the driver, lower gate-to-drain feedback capacitance, lower thermal impedance for higher switching frequencies.
  • Variable Low-Pass Filter - A low-pass filter is an electronic circuit that removes all the notes above the filter's frequency setting. You will use the Low-pass filter to primarily keep high notes out of your subwoofer(s).
  • High Level Inputs - Speaker level inputs are commonly referred to as high-level inputs. It will be used to connect the LOPRO10 to your factory radio or an aftermarket radio that does not have low-level (RCA) inputs.
  • Low-Level Inputs - Line level inputs (RCA inputs / low-level inputs) use RCA interconnect cables to link the LOPRO10 with the source unit. Most aftermarket radios have multiple pairs of RCA outputs that can connect to multiple amplifiers.
  • Variable Bass Boost - Variable Bass Boost allows you to adjust the low bass within the boost range to just the way you like it.
  • Specs – 15.5” x 11” x 3”. If you are short on space, this is a great solution for you. The combination of amplifier and subwoofer all into one, makes this ideal for spatially challenged vehicles. Weight: 13 lbs..
Check Stock

Sound Storm Laboratories LOPRO10 10 Inch Powered Under Seat Car Audio Subwoofer - 1200 Watts Max Built-in Amplifier Low Profile Remote Subwoofer Control for Truck Boxes and Enclosures

  • Built-in Amplifier - With a MOSFET power supply you get improved switching speeds, better performance with less power from the driver, lower gate-to-drain feedback capacitance, lower thermal impedance for higher switching frequencies.
  • Variable Low-Pass Filter - A low-pass filter is an electronic circuit that removes all the notes above the filter's frequency setting. You will use the Low-pass filter to primarily keep high notes out of your subwoofer(s).
  • High Level Inputs - Speaker level inputs are commonly referred to as high-level inputs. It will be used to connect the LOPRO10 to your factory radio or an aftermarket radio that does not have low-level (RCA) inputs.
  • Low-Level Inputs - Line level inputs (RCA inputs / low-level inputs) use RCA interconnect cables to link the LOPRO10 with the source unit. Most aftermarket radios have multiple pairs of RCA outputs that can connect to multiple amplifiers.
  • Variable Bass Boost - Variable Bass Boost allows you to adjust the low bass within the boost range to just the way you like it.
Check Stock