Top Passive Poe
Mikrotik CRS326-24G-2S+RM Network Switch L2 Gigabit Ethernet (10/100/1000) Grey Power Over Ethernet (PoE)
- The total non-blocking throughput is 168 Gbps, switching capacity is 336 Gbps and the forwarding rate reaches 235 Mpps..
- All 48 Ethernet ports offer different power output options: Passive PoE, low voltage PoE, 802.3af/at (Type 1 “PoE” / Type 2 “PoE+”) with auto-sensing.
Check StockYuanLey 6 Port PoE Switch with 4 Port PoE+, 2 Ethernet Uplink, 100Mbps, 78W 802.3af/at, Extend Function, Metal, Desktop, Unmanaged Plug and Play
- 【Port and Rate】This poe ethernet switch Include 4x10/100Mbps POE ports and 2x10/100Mbps uplink. All 1-4 POE ports support IEEE802.3AF/AT POE standard. The double uplink port can connect to nvr, switch, router, etc, make the network more reliable and flexible..
- 【78W High PoE Power】This poe injector built-in industrial power supply. The whole power is 78W, each port up to 30W and 15.4W in the same time.**Please note: not compatible 24V passive PoE**.
- 【Plug and Play】This poe network unmanaged switch support automatically detect devices, just plug in the power cord and network cable, no configuration required, easy to use..
- 【Extend Function】 When the extend mode is enabled, single POE port supports 250m transmission distances and 10Mbps speed, and all PoE ports support VLAN isolation, improve the network safety..
- 【Wide Applications】PoE and non-POE devices can be connected to this poe hub, such as poe camera/wireless ap, switch, router, computer, etc. It runs without noise and can be installed in office, home, and commercial locations. If you have any questions, please contact our official support, we will provide the best after-sales service.
Check StockPoE Texas GPOE-8B | Gigabit 8 Port Passive Power Over Ethernet Injector Mode B for Ubiquiti, Mikrotik & More | Power Supply Sold Separately
- Instantly add PoE to your network switch or router, with 10/100/1000 Gigabit data capability.
- Extend power up to 328 feet (100 meters) for up to 8 devices.
- Passive Mode B operation (pins +4,5/-7,8) is "always on".
- Power Supply NOT included - Use with a 24v DC power supply for 24 volt passive PoE.
- Backed by our 1 year manufacturer warranty - For expert technical support from Austin, TX please call 512 479 0317.
Check StockYIDUOYUNCAI 6 Port PoE Switch (4*100Mbps PoE Port+2*100Mbps Uplink Port),78W,802.3af/at,VLAN,Metal Fanless,Unmanaged Plug and Play
- ...wer budget up to 30W per PoE port and 78W for the whole..
- 【Extend Mode】When Extend Mode is enabled, the transmission distance of POE ports can be extended to 250m at transaction rate of 10M..
- 【Active poe switch with 802.3af/at compliant】Poe switches support poe devices and non-poe devices, But when connecting passive poe device or non-poe device,the switch can only transmit data and cannot power your device,so the connected device needs to be separately powered. Or you can use it with active poe splitter..
- 【AI PD Detection】The poe port will intelligently judge whether the device connected to the port needs power supply. If it is a non-poe device that does not need power supply, the switch will not supply power to these devices and will not damage the device..
- 【Plug and Play】6 Port Unmanaged Network Switch Support automatically detect devices,easy to setup with no software installation or configuration required..
- 【Fanless design】The fanless design makes poe switch work without any noise..
- 【Network cable short-circuit protection mechanism】POE switch is stable and has strong anti-interference ability, protect the fault caused by the short circuit of the network port.Short Circuit, Over Current and Over Voltage Protection..
Check StockBV-Tech 6 Port PoE+ Switch 4 PoE+ Ports with 2 Ethernet Uplink and Extend Function – 60W – 802.3at + 1 High Power PoE Port| Desktop Fanless Design | Sturdy Metal Housing
- 4 PoE+ Ports and 2 Ethernet Uplink Ports at 10/100Mbps each, making network setups easier and more convenient..
- Hi-PoE at port 1 providing up to 60W single port, PoE+ at port 2-4 up to 30W per port, which is better than normal PoE port that can only provide 15. 4W per port. 60W Max Total Power (includes 60W DC adapter)..
- Extend function extending max PoE transmission distance from 100 meters to 250 meters.
- PD detection will automatically detect and provide required power for your PoE devices **This is a 48V active PoE, NOT compatible with Ubiquiti devices which require 24V Passive PoE. **.
- 100% Satisfaction – 30-day Money-Back with 1 Year Warranty and Lifetime Tech Support.
Check StockPoE Texas GPOES-8-7AB-24v60w | 24 Volt 8 Port Passive PoE Switch for 24v Ubiquiti Devices with Gigabit Ethernet
- 8 port switch with 7 passive PoE ports up to 24 watts per port, 60 watts total with 10/100/1000 Gigabit Ethernet capability.
- Use to power 24 volt devices like Ubiquti, Tranzeo and OpenMesh - Please check manufacturer specifications for compatibility.
- Use as a PoE Repeater via the Uplink port to extend data only further - Mode B compatible.
- Unamanaged for easy install with VLAN transparancy - Passive "Always On" Power over Ethernet for versatility.
- Backed by 1 year warranty - For expert technical support from Austin, TX please call 512 479 0317.
Check StockMikrotik OmniTIK 5 PoE ac 7.5dBi Gb Ethernet Ports Access Point Omni Antennas
- OmniTIK 5 PoE ac also known as RBOmniTikPG-5HacD features five Gigabit Ethernet ports and support for 802.11ac.
- It’s equipped with a powerful 720MHz CPU, 128MB RAM, high power 802.11a/n/ac Dual Chain wireless (support for AC as well as backwards compatible with regular 802.11a/n CPE).
- The OmniTIK 5 PoE ac comes with a new design weatherproof outdoor enclosure, two integrated 7.5dBi 5GHz omni antennas, a power supply, a PoE injector and a mounting kit.
- It also supports passive or standard 802.3at/af PoE input/output. Ethernet ports 2-5 can power other PoE capable devices with the same voltage as applied to the unit.
- Size of RAM: 128 MB / CPU nominal frequency: 720 MHz / Storage size: 16 MB / Dimensions: 416 x 129 x 58 mm.
Check StockMikrotik wAP 60Gx3 AP WLAN Access Point Power Over Ethernet (PoE) White
- OmniTIK 5 PoE ac also known as RBOmniTikPG-5HacD features five Gigabit Ethernet ports and support for 802.11ac.
- It’s equipped with a powerful 720MHz CPU, 128MB RAM, high power 802.11a/n/ac Dual Chain wireless (support for AC as well as backwards compatible with regular 802.11a/n CPE).
- The OmniTIK 5 PoE ac comes with a new design weatherproof outdoor enclosure, two integrated 7.5dBi 5GHz omni antennas, a power supply, a PoE injector and a mounting kit.
- It also supports passive or standard 802.3at/af PoE input/output. Ethernet ports 2-5 can power other PoE capable devices with the same voltage as applied to the unit.
- Size of RAM: 128 MB / CPU nominal frequency: 720 MHz / Storage size: 16 MB / Dimensions: 416 x 129 x 58 mm.
Check StockPoE Ethernet Power Supply 4 Port POE DC 12V-48V Power Adapter Injector for IP Camera 802.3af/802.3at Device
- Made of plastic material, sturdy and durable to use. Conform to international safety product standards and is safe to use..
- This PoE injector is compatible with IEEE802.3af/at network devices. Apply for IEEE802.3af/at standard POE powered devices.
- This Non standard passive PoE injector is a simple and convenient equipment for PoE or Non PoE devices via an Ethernet cable.
- This device does not have auto detection function and directly supply power to the network devices by force as soon as you connect them, powered device or poe splitter must conform to standard IEEE 802.3af/at, the same time your powered device must support poe pin 4/5(+), 7/8(-) midspan..
- Please select according your device power consumption, in order to ensure stable running, the total power consumption must be lower than the total power supply.Tip: the power voltage should not be over DC48V..
Check StockCudy 8 Port Gigabit PoE Switch, 120 Watts PoE Budget, 8 10/100/1000Mbps PoE+ Ports, 2 Gigabit Uplink Ports , 802.3at, 802.3af, 1/2 (+), 3/6 (-), Fanless, Plug and Play, GS1010PE
- 120 watts reliable 8 ports gigabit PoE+ switch. GS1010PE contains 10 gigabit RJ45 ports, #1~#8 port support PoE functions which could offer 120 watts total PoE budget, while port #9~#10 port are just uplink ethernet ports only transfer data..
- 8 Gigabit PoE+ ports Ideal for small installations of 8 PoE or PoE+ devices (IP Phone, Wired surveillance camera, Wireless Access Point). 2 Gigabit uplink ports are suitable for connecting to the Internet and NVR respectively, which is very suitable for video surveillance and WiFi access applications..
- Compatible with any IEEE802.3af PoE and IEEE802.3at PoE+ device. Auto-sensing technology delivers up to 30W to an 802.3at PoE+ (30 watts) device with backwards compatibility for 802.3af PoE (15.4 watts) devices. Not support any passive (non-standard) PoE devices..
- Watchdog function will detect the status of the powered device in real time, once an abnormality is detected, the switch will actively reset the problem port and restore power..
- Plug and play, simple set up with no software or configuration needed. Built in power supply accommodate for most installation scenarios..
Check StockBV-Tech 6 Port PoE+ Gigabit Switch (4 PoE+ Gigabit Ports with 2 Gigabit Uplink and Extend Function) – 60W – 802.3at + 1 High Power PoE Port| Desktop Fanless Design | Sturdy Metal Housing
- 4 Gigabit PoE+ Ports and 2 Ethernet Uplink Ports at 10/100/1000 Mbps each, making network setups easier and more convenient..
- Hi-PoE at port 1 providing up to 60W single port, PoE+ at port 2-4 up to 30W per port, which is better than normal PoE port that can only provide 15.4W per port. 60W Max Total Power (includes 60W DC adapter)..
- Extend function extending max PoE transmission distance from 100 meters to 250 meters.
- PD detection will automatically detect and provide required power for your PoE devices **Note: Do not support passive PoE device**.
- 100% Satisfaction Guarantee – 30-day Money-Back Guarantee with 1 Year Warranty and Lifetime Tech Support.
Check Stock8 Port PoE Injector All in One DC12V-48V 8 Interfaces Passive Adapter Power Over Ethernet Module Injector
- [HIGH QUALITY ]---It does not have auto detection function and directly supply power to the network devices by force as soon as you connect them,all products are rigorously certified.
- [ DURABLE QUALITY]---Apply for IEEE802.3af/at standard POE powered devices other brands IP cameras, or being equipped together with IEEE802.3af/802.3at standard poe splitter for non POE devices. durable quality.
- [MATERIALS]---With high quality materials,This Non standard passive injector is a simple and convenient equipment for PoE or Non PoE devices via an Ethernet cable..
- [SAFE]---Conform to international safety product standards and safe,Suitable for widely used.
- [STABLE]---Made of plastic material, sturdy and durable to use.the performance is stable and reliable.
Check Stock