Top Pcb Drill Spindle Collet

Genmitsu CNC 3018-PRO Router Kit GRBL Control 3 Axis Plastic Acrylic PCB PVC Wood Carving Milling Engraving Machine, XYZ Working Area 300x180x45mm

  • This bundle includes a FoxAlien Masuter cnc router machine and the 300W spindle upgrade kit..
  • The Masuter cnc router supports upgrade to 300W spindle, which is more powerful. It can improve the engraving efficiency..
  • Masuter 4040 is a cost-effective CNC router with large working area of 400 x 380 x 55mm (15.75” x 14.96” x 2.16”)..
  • The control board is equipped with an upgraded 32-bit chip which works more efficient and stable. It also supports add-ons such as offline controller, 300W spindle and laser modules. (Add-ons sold separately).
  • Masuter 4040 is capable to engrave, cut and drill many kinds of material such as wood, MDF, acrylic, foam, resin, nylon, PCB, and aluminum etc..
Check Stock

CNC Spindle Motor Kits,220V 1.5KW ER11 Square Air Cooled Spindle Motor CNC Spindle CNC Motor + 220V 1.5KW VFD + Collets Set ER11+ Wires + Drill Bits+Wrenches for CNC Router Machine

  • 【Package list】 :1pcs 220V ER11 1.5KW Square air cooled spindle motor +1pcs 220V 1.5KW VFD +13pcs Collet ER11(1mm-7mm) + 10pcs Drill Bits(0.8-3mm,....
  • 【Easy and fast to assemble 】: Our VFD has been pre-setting up, the spindle is with 8 hole installing holes, we offer complete accessories that....
  • 【Longer working life】: There are Authentic 4pcs steel bearings comparing with 3 bearings of other suppliers, significantly extend working life 3....
  • 【High precision】:We make further processing for high accuracy & concentricity, the runout off of our spindle motor is less than 0.005mm that 10....
  • 【Warranty assurance】:We have 20 years manufacturing experience , pls contact us for any question or problem. We are proficient in customizing....
Check Stock

New Lathe ER32 Woodworking Dowel Collet Chuck System 1/4 3/8 1/2 5/8 3/4 USA

  • For 3/4″ x 16 Spindle Adapter & 5pcs ER32 collet.
  • 5 Collets: 1/4-Inch, 3/8-Inch, 1/2-Inch, 5/8-Inch and 3/4-Inch.
  • Excellent gripping for small diameter dowels and tenons.
  • Perfectly designed to hold a pen mandrel, and other small wood projects where a tenon is used.
  • 1-Inch by 8TPI thread with 3/4-Inch by 16TPI spindle adapter, with collet closing head.
Check Stock

Axe Cutting Wood with Impact Version 4

  • Excellent Motor: This machine is equipped with three 57 stepper motors and a 300W standard spindle motor to ensure a smooth operation. The 400 x 300 x 100 mm working area also contributes to an excellent cutting and milling performance..
  • Rigid Coupling & Ball Screw: Refined rigid coupling is capable to eliminate transmission error. X & Y axis ball screw and nuts can reduce friction and improve accuracy. Help you achieve higher performance and better control..
  • Redesigned Control Box: This cutting machine has an independent offline controller. You can adjust the XYZ axes and turn on or off the spindle manually. You can also connect it to a computer via the USB interface, implementing more steps..
  • Aluminum Alloy Board: The aluminum alloy operating panel allows users to wipe the engraving drills with oil or a small amount of water to achieve a cooling effect. Besides, it also features hard-wearing and never rust, prolonging life service..
  • Wide Application: This CNC router machine comes with 20 pcs drill bits. It can be used on many projects and materials, such as plastics, woods, soft aluminum, acrylics, PVC, PCB, etc..
Check Stock

PCB Drill Bits Set, Micro Drill Bits Set, 50pcs PCB Drill Bit Set Spiral Flute Carbide 0.3mm-1.2mm Drill Bits for Dremel Print Circuit Board Jewelry CNC Engraving (5PCS Each) by BOOTOP

  • This PCB Drill Bit Set contains 10 different size drill bits diameter: 0.3mm, 0.4mm, 0.5mm, 0.6 mm, 0.7 mm, 0.8 mm, 0.9 mm, 1.0 mm, 1.1mm, 1.2mm. And each size have 5 pcs. Varies sizes to meet different needs..
  • This micro drill bits are designed to drill and engrave on print circuit board and other precise work. The PCB Drill Bits are made of high quality tungsten steel, highly wear resistance, high hardness, bending strength, anti-impairment, highly working efficiency. Seismic design on the blade edge enables it to stay stable during engraving..
  • PCB Drill Bits Set are great for punching at printed circuit boards, 3D Printer Nozzle Cleaning, CNC engraving plexiglass, Amber beeswax, bakelite, jewelery, metal plastic and other precision drilling.
  • cutting and engraving and worked on Acrylic, PVC, Nylon, Resin, Fiberglass,etc..
  • PCB Drill Bit With sharp cutting edge, milling groove and clean surface, these sets of tool work quickly and cleanly, no glitches or scrap left. Package with high quality plastic box, easy carry and better protection keeps the blade tip goods in the delivery from being damaged..
  • 180 Days warranty. If you are not satisfied with our products,feel free to contact us for a replacement or refund. The PCB Drill Bits may also know as micro d....
Check Stock

RATTMMOTOR 110V Water Cooled Spindle Motor 2.2KW 80mm CNC Spindle Motor ER20 24000RPM 400HZ+2.2KW VFD Drive 110V Inverter Converter Spindle Motor Speed Controller+ER20 Collets for CNC Router Machine

  • Notice: (1)The spindle speed can't be lower than 9000rpm!!!! (2) This spindle only supports clockwise rotation, not reverse rotation. (3)This Spindle....
  • 【14pcs/set ER20 Collets】Size: 3.175mm,1mm, 2mm, 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12mm, 13mm..
Check Stock

RATTMMOTOR 400W Blushless CNC Air Cooled Spindle Motor ER8 12000RPM + 600W Blushless Spindle Motor Driver LCD Panel without Hall + 55mm Clamp Mount for CNC Router Milling Machine

  • 【Brussless Spindle Motor】Power: 400W.
  • Note: Please see clearly that this spindle motor output shaft is with ER8 collet,and output shaft is complete shaft, can't be exchanged to ER11, ER16....
  • 【Brussless Spindle Motor Driver】Maximum driver power: 600W.
  • Maximum driver motor running speed: 12000R/Min.
  • Brushless spindle driver（Model Name: NVBDL）is specialized for the ecomomic engraving machine,it matchs with the brushless DC motor. With the....
  • The users can take down the panel from the main driver and install it on the controller cabinet.By the panel,you can set the parameter,control motor....
Check Stock

CNC Spindle, MYSWEETY 500W Air Cooled 0.5kw Milling Motor and Spindle Speed Power Converter and 52mm Clamp and 13pcs ER11 Collet for DIY Engraving

  • ️【CNC Spindle kit 500W】- 1 x 500W Air-Cooled Spindle Motor, 1 x AC110V/220V Speed Governor with MACH3, 1 x 52mm Mount bracket, 13 x ER11 collect, 10 x V Bit Cutter, 4 x Screws(free)..
  • ️【500W CNC Spindle motor】- Operating voltage: 100VDC, Power: 500W, Input: AC110V, Speed: Up to idle up to 12,000 rev / min, Torque: 5000G/CM. Insulation resistance:> 2 megohms, Dielectric strength: 400V. Motor Length: 200MM, High precision spindle run out 0.01-0.03..
  • ️【Speed Power Switch】- Input voltage: AC110V/220V, 50/60Hz. Output current peak: 6A. Output voltage: DC0-100V. Please install in the place that is draughty, no dramatic impact, no vibration, no explosion hazard medium, no conductive metal particle..
  • ️【 52mm Mount Bracket】- Made of high quality cast aluminum, this spindle motor bracket clamp is strong and durable. Diameter: 52mm, Chuck portion length: 45MM, Chuck portion diameter: 16mm..
  • ️【ER11 Collet Chuck】- 13Pcs ER11 Collet Set Gripping Range: 1MM to 7MM(1mm,1.5mm,2mm,2.5mm,3mm,3.5mm,4mm,4.5mm,5mm,5.5mm,6mm,6.5mm,7mm). Run-out tolerance 0.01mm. For CNC milling Lathe Tool & Work holding Engraving machine..
Check Stock

LiFuJunDong 4 Axis USB CNC6040 Router Engraving Machine 3D Milling Machine w/Controller 110V 1.5KW VFD Water-Cooling Router Engraving Machines for Metal, Wood, Glass and Plastic (6040 1.5KW 4AXIS)

  • ... Aluminium alloy Max. Feeding height: ≤100mm Drive unit: X axis---1605 Ball Screws Y axis---1605 Ball Screws Z axis---1204 Ball Screws Sliding unit: X axis---High intensity Chromeplate shaft Y axis---High intensity Chromeplate shaft Z axis---High intensity Chromeplate shaft Stepping motor: 57 two-phase 3A 150N.cm.
  • SPINDLE MOTOR-1】 Outside dimension: 65*158mm Material: 304 stainless steel, Copper coil, Pressure cast aluminum pipe water jacket VOLTS, current, power: AC110V, 60Hz, 5A, 1.5 KW VFD Spindle motor: 1.5 KW Water Cooled Spindle speed: 24000 rpm Max working frequency: 400Hz Principal axis collet: ER11collet, Standard configuration :6mm Nut Model: ER11-A Cooling: Water-cooling Speed ​​mode: By adjusting the VFD output voltage and operating frequency from 0-24000RPM.
  • SPINDLE MOTOR-2】Lubrication way: lubricated by high grease Repeat accuracy: 0.05mm Spindle precision: radial beat acuities 0.03mm Carving Instructions: G code / TAB files / nc file / NCC files Communication interface: through USB connection with computer Working Speed: 50-1500mm / min (different material with different speed settings) Maximum Idle speed: 0-1500mm/min.
  • HIGHLIGHTS OF WATER COOLING SYSTEM 】It can cool the spindle and protect the machine Avoid the spindle burn o....
Check Stock

Genmitsu CNC 3018-PRO Router Kit Milling Engraving Machine + GS-775M 20000RPM 775 CNC Spindle Motor with ER11 Collet Set

  • What You Get: Genmitsu 3018-PRO CNC router kit.
  • 1pcs CNC Spindle Motor with ER11 Collet. (Note: They will be shipped separately).
  • Premium Power Adapter: The 3018-PRO has brought safety improvements to the adapter, with CE/FCC/UL-approved. Strong built for heavy-duty and long usage performance, making input/output stably even when work for a long time or work with a laser module..
  • Offline Controller: The 3018-PRO comes with an offline controller, you can manually adjust X, Y, Z-axis without connecting to the computer and download files..
  • Versatile: Capable of cutting all types of plastics, soft aluminum, woods, acrylics, PVCs, and PCBs, the Genmitsu can be used on a wide range of projects and materials. Assembly instructions are provided, but if you get stuck, check out the SainSmart wiki page or contact us with any questions that arise..
  • Speed: 20000/min. Pre-installed motor noise suppression PCB provides enhanced performance. It's compatible with Genmitsu 3018 Series CNC router. Applied to lathes, mills, car hoists, pumps & conveyors, etc..
Check Stock

NICCOO Bench Drill Stand,Multifunction Worktable Milling Working Table Milling Machine Compound Drilling Slide Table For Bench Drill (1-13mm)

  • 4040-XE CNC Router uses 300W spindle and NEMA23 stepper motors, which are more powerful and efficient. Max moving speed is 2000mm/min and spindle speed range is 0~10000..
  • Control board, power supply, emergency stop, and wires are integrated into a newly design box, which is simple for operation, easy to clean and safe. The controller has a 3.5” touchscreen LCD which also functions as an offline controller. The input voltage is 110V..
  • It’s capable to engrave, cut and drill many different kinds of material such as wood, metal, MDF, acrylic, foam, resin, nylon, carbon fiber, PCB and etc. It’s great for home use and business..
  • Large engravable area of 15.75”x15.75”x2.56” (400x400x65mm). It’s capable to handle both small and large material. The CNC machine is based on GRBL, it is compatible with GRBL-control software..
  • Easy assembly. Main parts are pre-assembled, it only takes 15-30mins to fully assembly. Wires are labeled clearly for fast connection and bundled into drag chain for easy management..
Check Stock

RATTMMOTOR CNC Router Spindle Motor 220V 2.2KW Square Air Cooled Spindle Motor ER20 4 Bearings 3-Phase 24000RPM 6A 400Hz for CNC Router Engraver Milling Cutting Machine

  • 【Simple discreption】This is a 220V 2.2KW Square air-cooled spindle motor come with a ER20 nut and collet. Current is 6A, frequency is 400HZ,....
  • 【Spindle speed】The speed of the spindle motor is 0-24000RPM. Because it is a high-speed spindle motor, the spindle speed must not be lowered than....
  • 【How to wring it to Inverter】The spindle’s terminal U1, V1, W1 are connected separately to inverter’s terminal U, V,W. Connect any 2pin....
  • 【Note】Before driving, turn the shaft by hand first. The temperature's rise caused by the high-speed rotation of the spindle motor can be....
  • 【Main application】Wood, Aluminum, Glass, PVC industry.The Spindle motor is mainly suitable for NON-metallic engraving..
Check Stock