Top Pcb Mounted Connector

YMDK Aluminum Brush Finish ANSI Anodized Positioning Board Plate Plate-Mounted for GH60 PCB GK61 GK61x Hot Swap PCB

  • Package Included: 1x plate.There is no screws and copper stand included..
  • Pls note: Original GK61 GK61x GK61xs plastic case can't use this plate directly.Need to replace a GH60 compatible case.
  • This plate is anodized brush finished.It can only use with plate mounted stabilizers.
  • If you use with GK61 /GK61x PCB,can just mount 4-5 switches into the plate corner and then plug to PCB socket totally.After the plate PCB fixed,then mount other switch in 1 by 1 is ok.At last screw plate PCB togehter to GH60 size case is ok with the screws in your case..
Check Stock

FDSF USB 3.1 Type C to Type C Extension Cable 90 Degree FPC FPV Ribbon Flat USB C Cable 3A 10Gbps EMI Shielding, 30cm

  • The PCB is made of high-quality materials with high frequency and low resistance. The PCB is made of precision. The PCB uses high TG plates. The thickness of the copper material is thickened to 1oz. The PCB power circuit is strengthened and the use of 2 5V power core wires is strengthened, so that the transmission current is more powerful. Support up to 3A..
  • The differential signal has no via hole design, the signal is pure, there is no signal attenuation interference problem of parasitic capacitance and parasitic inductance, and there is no CAF short circuit phenomenon, and the product is durable..
  • Product application: GPS navigator, storage device, imaging device, for Pi 4 for MCU development board, built-in USB device to extend the use of , convenient for USB power supply and USB signal transmission of SLR handheld pan/tilt, etc..
  • Cable length Description: The length of the wire refers to the part of the visible wire. It does not include the PCB and the connector..
Check Stock

Cermant 3-Pin 5.08mm Pitch Male Female Plug-in PCB Screw Terminal Block Connector (5.08mm-3P-20Set)

  • Pin Number : 3 Pin Distance : 5.08mm/0.2"..
  • These PCB screws are snap together well.have a quick release capability.Just need to loosen the screws to land the wires.Use high-quality plastic PA66 high temperature resistant V0 flame retardant,steel screw environmentally friendly electroplating,no slippage.Widely used in electronics,communication equipment,instruments.
  • Package Content: 20 Set x PCB Terminal Block Connector.
Check Stock

EPOMAKER Skyline Gasket-Mounted 75% Hot Swappable Wired Gaming Keyboard DIY Kit with RGB Backlight, Rotary Knob, Compatible with 3Pin 5Pin Gateron/Cherry/Kailh/Otemu Switch (Transparent)

  • 【Gasket-Mounted Structure】Gasket mounting is a type of keyboard mounting, where no screw holes are drilled into the switch plate. Instead, the switch plate is wedged in between the case layers and PCB through the support of rubber strips, or gaskets. Compared to a top mount system, a gasket-mounted keyboard has a cleaner sound profile because the gaskets cushion the shock of each keypress. Gasket-mounted keyboards also give a softer typing experience, which helps avoid hand fatigue for those who type for long periods. On the other hand, top-mounted keyboards tend to be stiffer.
  • 【82 Keys 75% Compact Layout】EPOMAKER Skyline custom wired mechanical keyboard DIY kit is designed in a favored compact 75% layout by the community to maximize the function while not waste a minimum of space. This layout is widely used and loved by the community and Skyline will surely beyond your expectation with the hot swappable socket and programmable software, amazing RGB backlights.
  • 【Hot Swappable PCB, Compatible with 3Pin/5Pin Switch】EPOMAKER Skyline Kit is equipped with hot swappable PCB to ensure free replacement or change of switches. You don’t need to solder it. It is compatible with most 3 pin and 5 pin mechanical switches, such as Cherry, Gateron, ....
Check Stock

CableCreation Internal HD Mini SAS (SFF-8643 Host) - 4X SATA (Target) Cable,SFF-8643 to 4X SATA Cable, SFF-8643 for Controller, 4 Sata Connect to Hard Drive, 1M / 3.3FT

  • [ SFF-8643 Cord ] The SFF-8643 is the latest HD Mini SAS connector design for implementing HD SAS Internal interconnect solutions..
  • [ High Data transfer] 36 pin High Density (HD) Mini SAS SFF-8643 Internal cable assemblies are available for SAS 2.1, 6Gb/s and SAS 3.0, 12Gb/s specification. Hybrid versions of these new cables will allow for a smooth transition from 6Gbps to 12Gbps.
  • SFF-8643 is the new connector uses less PCB real estate and allows higher port density for internal hosts and devices.
  • [ SFF-8643 Port ] SFF-8643 interface is the new connector uses less PCB real estate and allows higher port density for internal hosts and devices. It support up to 4-ports (4 lanes) of SAS data and is compliant with the latest SAS 3.0 spec.
  • [ What You Get] 1 x CableCreation 3 FT Mini SAS SFF-8643 Cable. CableCreation provide 24 Months Warranty and lifetime Technical Service.
Check Stock

EPOMAKER Next time Skyline Gasket-Mounted 75% Hot Swappable Wired Gaming Keyboard DIY Kit with RGB Backlight Rotary Knob Compatible with 3Pin 5Pin Gateron/Cherry/Kailh/Otemu Switch White

  • 【Gasket-Mounted Structure】Gasket mounting is a type of keyboard mounting, where no screw holes are drilled into the switch plate. Instead, the switch plate is wedged in between the case layers and PCB through the support of rubber strips, or gaskets. Compared to a top mount system, a gasket-mounted keyboard has a cleaner sound profile because the gaskets cushion the shock of each keypress. Gasket-mounted keyboards also give a softer typing experience, which helps avoid hand fatigue for those who type for long periods. On the other hand, top-mounted keyboards tend to be stiffer.
  • 【82 Keys 75% Compact Layout】EPOMAKER Skyline custom wired mechanical keyboard DIY kit is designed in a favored compact 75% layout by the community to maximize the function while not waste a minimum of space. This layout is widely used and loved by the community and Skyline will surely beyond your expectation with the hot swappable socket, amazing RGB backlights.
  • 【Hot Swappable PCB, Compatible with 3Pin/5Pin Switch】EPOMAKER Skyline Kit is equipped with hot swappable PCB to ensure free replacement or change of switches. You don’t need to solder it. It is compatible with most 3 pin and 5 pin mechanical switches, such as Cherry, Gateron, Otemu, Kailh and other MX ....
Check Stock

Ethernet Splitter Cable RJ45 Network Adapter, Onepeace 1 Male to 2 Female LAN Internet Cable Adapter, Suitable Super Cat5, Cat5e, Cat6, Cat7

  • Ethernet Splitter RJ45 1 to 2 allow 2 computers to share high speed DSL, cable modem or other Ethernet ports. NOTE: Don’t support 2 computers that connect to the internet simultaneously, ONLY 1 output port is working..
  • 【Enjoy High-speed Internet Access】Pure Copper Gold-Plated Needle with Eight Cores, Watching movies, chasing dramas, surfing the Internet, playing games, etc., lossless transmission rate is fast, so that buffering is faster without waiting..
  • 【Extensive Compatibility】Suitable for equipment with RJ45 interface, computer, router, network box, optical modem, can be used as an extension, compatible with Cat5/5e/6 7..
  • 【Thicker PCB】The Ethernet splitter connector adopts thicker PCB board, gold-plated needle core, and integrated mechanical welding to avoid damage caused by wire leakage..
  • 【Plug and Play】Connector A: 1 to 2 RJ45 Ethernet splitter, Connector B: RJ45 . This RJ45 1 to 2 RJ45 Ethernet splitter can help you avoid pulling cables back and forth, Installation simple and easy to use..
Check Stock

Jienk 5Pcs 4-Pin 300V 8A KF2EDGK 3.5mm Pitch Screw Terminal Block Connector for 28-16AWG

  • 【Terminal Pitch】3.5mm/ 0.14inch pitch PCB terminal block connector..
  • 【Easy to Use】No soldering required. Just use a small screwdriver to open up the terminal blocks, slide in your stranded or solid-core wire, and re-tighten. Save you from solder trouble, no need to purchase expensive tool. Great time and money saver..
  • 【Application】: PCB terminal is widely used in electronic equipment, such as small electronic watches, calculates, general computer, communication electronics equipment automatic control system, domestic appliance and warning devices, etc..
  • 【Package Includes】: 5 x PCB Terminal Blocks..
Check Stock

uxcell IDC 20 Pins Connector Flat Ribbon Cable Female Connector Length 30cm 2mm Pitch,5pcs

  • 20 Pins Connector Flat Ribbon Cable,2mm Pitch.
  • Suitable for internal wiring in office equipment and video machines.
Check Stock

uxcell IDC 14 Pins Connector Flat Ribbon Cable Female Connector Length 30cm 2mm Pitch,5pcs

  • 14 Pins Connector Flat Ribbon Cable,2mm Pitch.
  • Suitable for internal wiring in office equipment and video machines.
Check Stock

ADT-Link R44SF / R24SF M.2 NVMe SSD Extension Cable Solid State Drive Riser Card Support M2 to PCI Express 3.0 X4 PCIE Full Speed 35G/BPS(R24SF 10CM)

  • Wire advantages: Using the German patent imported wire, using the Lotes connectors which imported from Taiwan, high frequency support PCIe 3.0 X16 8G/bps stable transfer..
  • Cable length: Our wire has a low impedance, the cable below 60cm can be stable at PCIe3.0 full speed reading and writing..
  • Differential signal without hole design, there is no problem of signal attenuation interference in a parasitic capacitance and parasitic inductance, there will be no more CAF micro short circuit, cable is durability..
  • PCB use high frequency low resistance of materials with high quality, PCB using high TG board, copper thickness thicken to 1oz, gold finger plating enough gold, Good conductive performance, can reduce oxidize higher impedance caused by the crash blue screen..
  • R24SF ,Connector 1: PCIe x4 ,Connector 2: M.2 NVMe SSD.
Check Stock

uxcell IDC 16 Pins Connector Flat Ribbon Cable Female Connector Length 30cm 2.54mm Pitch,5pcs

  • 16 Pins Connector Flat Ribbon Cable,2.54mm Pitch.
  • Suitable for internal wiring in office equipment and video machines.
Check Stock