Top Pcb Prototyping System

10K Ohm Trim Potentiometer Breadboard Trim Potentiometer Kit with Knob Variable Resistors Trimmer Potentiometer Assortment Kit Compatible with Arduino, Blue (12 Pieces) (12 Pieces)

  • Package content: you will receive 12 pieces of trim potentiometers with knobs in blue color, suitable for breadboarding and prototyping.
  • Such a sufficient quantity can easily meet your daily usage and replacement demand.
  • Reliable to use: composed of quality material, these breadboard trim potentiometers are safe and sturdy, reliable and stable, will not easily break or deform, which can be applied for long-term use.
  • Reasonable design: with round pins rather than flat blade pins of other trimpots, these linear potentiometers are suitable for both breadboarding and PCB.
  • The knurled knob with arrow design allows you to easily adjust by hand or small flat blade screwdriver.
  • Specification: these trim potentiometers adopt linear resistance change mode, the rotation angle is 270 degrees, and adjustable range is 0-10K ohm, which are easy to connect and can work well.
  • Dimension information: each rotary potentiometer measure approx. 0.375 x 0.375 x 0.19 inch/ 9.5 x 9.5 x 4.9 mm, such a small size only requires little space, which makes them easy for you to store.
Check Stock

Chanzon 120 pin 10cm 20cm 30cm Long Header Jumper Wire Dupont Cable Line Connector Assorted Kit Male Female Ribbon Solderless Multicolor for Arduino Raspberry pi Electronic Breadboard Protoboard PCB

  • Premium Quality: Sturdy male tinned copper pins never fall off, Female pins are perfectly fit for the Male one ,accurate hole-pitch: 2.54 mm. Our 11 core copper wire with low resistance have a better conductivity and more reliable than copper-clad aluminium one..
  • Max current is up to 1A with 24awg wire, The entire jumper wire have been tinned, can be cut from between and resolder. You can flexibly separate them into 1 individual wire perfect for various applications..
  • Compatible with arduino, breadboard, raspberry pi, prototyping, parallax, PCB project, DIY experiment, electronic project, etc..
  • Product: Ribbon. 3 Types: M-M,M-F,F-F. Length: 20cm. The wire gauge: 24 AWG. Color: multicolored, standard color scheme. 2.54mm pitch headers and socket, proper diameter to fit in the holes of breadboard..
  • Material: Tinned copper is primarily used for protection against oxidation and corrosion, good for soldering. Package: Comes with 3 x 40pin ( M-M, M-F, F-F ) 20cm multicolored jumper wire..
Check Stock

Brio AQUUS TROE600COL Reverse Osmosis Water Filtration System, 4-Stage Tankless RO Water Filter System for Under Sink, 600 GPD, 1.5:1 Pure to Drain, Reduces TDS, Smart Faucet, USA Support, Black

  • NSF/ANSI CERTIFIED FILTRATION: The PCB filter of the Brio AQUUS Reverse Osmosis Water Filtration System has 3 stages—non-woven PP, coconut carbon fiber, and coconut carbon block—and is certified against NSF/ANSI 42 for CTO reduction. The RO membrane, with a pore size of 0.0001 microns, is certified against NSF/ANSI 58 for TDS reduction. Together, these filters significantly reduce sediment, chlorine, iron, TDS, PFAS, atrazine, lead, arsenic, nitrates, fluoride, radium, and more. So, if you’re concerned about the quality of your tap water, you can count on the Brio tankless under sink RO system to produce delicious, reliably purified water for you and your whole family.
  • SPACE-SAVING DESIGN: Sleek and modern, the Brio AQUUS RO system measures 5.2” W x 16.6” H x 18.2” D and takes up approximately 30% of typical under sink space, preserving 70% for storage. The innovative tankless filtration design has an integrated system that’s leak-proof and resists recontamination, a hazard for a reverse osmosis under sink system with a tank.
  • SMART FAUCET WITH 2 FILTRATION OPTIONS: The LED smart faucet features a TDS meter, so you know what the TDS level is in your RO-....
Check Stock

Gikfun Prototype Shield DIY Kit A1 for Arduino Mega 1280 2560 R1 - R3 (Pack of 2pcs) EK1096x2

  • Prototyping Shield Diy Kits. Great for building your own designed Arduino Uno sheilds..
  • You can solder parts to the prototyping area to create your project, or use it with a small solderless breadboard to quickly test circuit ideas without having to solder..
  • It's got extra connections for all of the Arduino MEGA 1280 / 2560 R1 R2 R3 pins, and it's got space to mount through-hole and surface mount integrated circuits..
  • The Prototyping Shield makes it easy for you to design custom circuits..
  • It's a convenient way to make your custom circuit and Arduino into a single module..
Check Stock

Brio G10-U Reverse Osmosis Water Filtration System, 4-Stage Tankless RO Water Filter System for Under Sink, 500 GPD, 2:1 Pure to Drain, Reduces TDS, Smart Faucet, USA-Based Customer Support, Black

  • NSF/ANSI CERTIFIED FILTRATION: The PCB filter of the Brio G10-U Reverse Osmosis Water Filtration System has 3 stages—non-woven PP, coconut carbon fiber, and coconut carbon block—and is certified against NSF/ANSI 42 for CTO reduction. The RO membrane, with a pore size of 0.0001 microns, is certified against NSF/ANSI 58 for TDS reduction. Together, these filters significantly reduce sediment, chlorine, iron, TDS, PFAS, atrazine, lead, arsenic, nitrates, fluoride, radium, and more. So, if you’re concerned about the quality of your tap water, you can count on the Brio tankless under sink RO system to produce delicious, reliably purified water for you and your whole family.
  • SPACE-SAVING DESIGN: Sleek and modern, the Brio G10-U RO system measures 5.2” W x 16.5” H x 18.2” D and takes up approximately 30% of typical under sink space, preserving 70% for storage. The innovative tankless filtration design has an integrated system that’s leak-proof and resists recontamination, a hazard for a reverse osmosis under sink system with a tank.
  • SMART FAUCET WITH 2 FILTRATION OPTIONS: The LED smart faucet features a TDS meter, so you know what the TDS level is in your RO-....
Check Stock

Brio G10-U Reverse Osmosis Water Filtration System, 4-Stage Tankless RO Water Filter System for Under Sink, 500 GPD, 2:1 Pure to Drain, Reduces TDS, Smart Faucet, USA-Based Customer Support, White

  • NSF/ANSI CERTIFIED FILTRATION: The PCB filter of the Brio G10-U Reverse Osmosis Water Filtration System has 3 stages—non-woven PP, coconut carbon fiber, and coconut carbon block—and is certified against NSF/ANSI 42 for CTO reduction. The RO membrane, with a pore size of 0.0001 microns, is certified against NSF/ANSI 58 for TDS reduction. Together, these filters significantly reduce sediment, chlorine, iron, TDS, PFAS, atrazine, lead, arsenic, nitrates, fluoride, radium, and more. So, if you’re concerned about the quality of your tap water, you can count on the Brio tankless under sink RO system to produce delicious, reliably purified water for you and your whole family.
  • SPACE-SAVING DESIGN: Sleek and modern, the Brio G10-U RO system measures 5.2” W x 16.5” H x 18.2” D and takes up approximately 30% of typical under sink space, preserving 70% for storage. The innovative tankless filtration design has an integrated system that’s leak-proof and resists recontamination, a hazard for a reverse osmosis under sink system with a tank.
  • SMART FAUCET WITH 2 FILTRATION OPTIONS: The LED smart faucet features a TDS meter, so you know what the TDS level is in your RO-....
Check Stock

SIM&NAT 12inch / 30cm 40 Pin Male to Female Dupont Wire, 40 Pin Male to Male, 40 Pin Female to Female Breadboard Jumper wire Ribbon Cables kit for Arduino Raspberry Pi 2 / 3 (120 PCS)

  • The pitch of each end of the wire is 0.1 inch (2.54mm).
  • 40 pin jumper Wire are easy to separate from the ribbon.
  • Suitable for Arduino breadboard kit project, PCB project, PC motherboard, DIY experiment, 3D printer and etc..
  • Package content: 1 * 40 pin male to female jumper wires, 1 * 40 pin male to male cable and 1 * 40-pin female to female cable (total 120pcs)Description.
  • The wires are easy to peel apart and great for making good looking prototypes.
  • Work on a Raspberry pi breadboard projects, Raspberry pi robot build, Breadboard prototyping, Arduino and ky-040 rotary encoders..
  • Insert onto the SW LED pin on the typical desktop computer mother board..
  • Test bread boarding projects or for any breadboard experimenter..
  • 1 * 11.8 inch 40 pin male to male Breadboard Jumper Wires.
  • 1 * 11.8 inch 40 pin female to female Breadboard Jumper Wires.
  • 1 * 11.8 inch 40 pin male to female Breadboard Jumper Wires.
Check Stock

KEYESTUDIO MEGA Sensor Shield V1 for Arduino MEGA R3 2560 Prototype Board Projects

  • Nice Sensor shield of MEGA Rev3, Easy prototyping and Very convenient especially for 3PIN (G V S) connections. There are tons of ground and VCC headers making really it easy to connect various Arduino modules and sensors with DuPont style cables..
  • This sensor shield board really simplify the circuit and easily connect commonly used sensors.The board is having digital and analog interface, Bluetooth module communication interface, SD Card module communication interface, APC 220 radio frequency module interface, etc..
  • This sensor shield allows ease development and prototyping and makes convenient way to connect many external devices/sensors..
  • This board works well for prototyping or certain permanent applications and a very handy companion to an Mega Rev3 or compatible board..
  • 100% Compatible with the programming software for Arduino. Excellent shield board in good quality and packaged in a nice box! Great for all kinds of scientific experiment research for Arduino.
Check Stock

PUSOKEI Desktop PC Motherboard,DDR4 Motherboard for AMD A320,Micro-ATX Dual Channel DDR4 2800/2666MHz,PCI E x1/USB 3.0/USB2.0/SATAIII/HDMI/M.2/VGA/Gigabit

  • E‑Guard System hardware level protection, anti‑surge and anti‑static components, protect the motherboard from thunderstruck and static electricity. The motherboard can support all kinds of mainstream expansion devices.
  • De‑Voltage protection system is composed of multiple components to form a systematic protection mechanism, which completely eliminates internal and external shocks to the motherboard.
  • PCB electrical performance enhancement technology, better PCB means better electrical stability, better heat dissipation, and longer life.Diversified audio‑visual system, with a more comprehensive video output interface, just to be compatible with all your display devices, while supporting multi‑screen display technology.
  • High‑speed gigabit netcard built for games, with bandwidth management software, can automatically increase the priority of online game bandwidth, reduce game delays, and enjoy a fluent game experience.
  • Professional audio chips and customized HiFi audio capacitors provide high‑quality sound quality.
  • at the same time, the audio area is isolated from the digital circuit by the audio dividing line on the PCB, which effectively reduces the impact of digital signals on the sound.
Check Stock

Chanzon 120pcs 10cm 20cm 30cm Long Header Jumper Wire Dupont Cable Line Connector Assorted Kit Set (Male Female M-M M-F F-F) Solderless Multicolor for Arduino Raspberry pi Electronic Breadboard PCB

  • Premium Quality: Sturdy male tinned copper pins never fall off, Female pins are perfectly fit for the Male one ,accurate hole-pitch: 2.54 mm. Our 11 core copper wire with low resistance have a better conductivity and more reliable than copper-clad aluminium one..
  • Max current is up to 1A with 24awg wire, The entire jumper wire have been tinned, can be cut from between and resolder. Individual wire perfect for various applications..
  • Compatible with arduino, breadboard, raspberry pi, prototyping, parallax, PCB project, DIY experiment, electronic project, etc..
  • Product: Individual. 3 Types: M-M,M-F,F-F. Length: 20cm. The wire gauge: 24 AWG. Color: multicolored, standard color scheme. 2.54mm pitch headers and socket, proper diameter to fit in the holes of breadboard..
  • Material: Tinned copper is primarily used for protection against oxidation and corrosion, good for soldering. Package: Comes with 120pin (40pin M-M, 40pin M-F, 40pin F-F) 20cm multicolored jumper wire..
Check Stock

Jienk 5Pcs 4-Pin 300V 8A KF2EDGK 3.5mm Pitch Screw Terminal Block Connector for 28-16AWG

  • 【Terminal Pitch】3.5mm/ 0.14inch pitch PCB terminal block connector..
  • 【Easy to Use】No soldering required. Just use a small screwdriver to open up the terminal blocks, slide in your stranded or solid-core wire, and re-tighten. Save you from solder trouble, no need to purchase expensive tool. Great time and money saver..
  • 【Application】: PCB terminal is widely used in electronic equipment, such as small electronic watches, calculates, general computer, communication electronics equipment automatic control system, domestic appliance and warning devices, etc..
  • 【Package Includes】: 5 x PCB Terminal Blocks..
Check Stock

Desktop PC Motherboard for Intel H310,DDR4 Motherboard for Intel 8th LGA1151,Micro-ATX DDR4 Dual Channel,PCI E/USB 3.0/USB2.0/SATA3.0/HDMI/VGA/Gigabit

  • E‑Guard System hardware level protection, anti‑surge and anti‑static components, protect the motherboard from thunderstruck and static electricity. The motherboard can support all kinds of mainstream expansion devices..
  • De‑Voltage protection system is composed of multiple components to form a systematic protection mechanism, which completely eliminates internal and external shocks to the motherboard..
  • PCB electrical performance enhancement technology, better PCB means better electrical stability, better heat dissipation, and longer life..
  • High‑speed gigabit netcard built for games, with bandwidth management software, can automatically increase the priority of online game bandwidth, reduce game delays, and enjoy a fluent game experience..
  • Professional audio chips and customized HiFi audio capacitors provide high‑quality sound quality.
  • at the same time, the audio area is isolated from the digital circuit by the audio dividing line on the PCB, which effectively reduces the impact of digital signals on the sound..
Check Stock