Top Pci To Ide Card
Optimal Shop 20+4 Pin LCD Computer Power Supply Tester for SATA IDE HDD ATX ITX BYI Connectors-Black
- 8-in-1 ATX power supply tester: Support testing 20-pin IDE/24-pin IDE/HDD/floppy disk 4-pin/PCI-e 6-pin/4-pin/8-pin/SATA connector..
- Aluminum alloy shell: light and easy to carry, high strength, good thermal conductivity and corrosion resistance..
- 1.8″ LCD screen: The output voltage is displayed on the 1.8″ LCD screen, which is easy to read (1.8″ LCD screen is powered by the 20-pin/24-pin connector). Note: Is there a scratch on the product screen? Because the screen is easy to scratch, we put a protective film on it, if you think it is not beautiful, you can tear it off by yourself..
- Buzzer alarm: When your power supply PG number fails, the power tester will emit a buzzer alarm, which is easy to know..
- When testing with HDD/floppy disk 4-pin/PCI-e 6-pin/4-pin/8-pin/SATA connector, the indicator on the left shows the output voltage (+12V + 3.3V + 5V)..
Check StockWSDMAVIS 1 Pcs SD Card to IDE Adapter 2.5 Inch 44Pin Male Adapter SD SDHC SDXC MMC Memory Card Converter to Laptop HDD
- Use this product to convert SD card into 2.5inch 44pin IDE interface.There are two main control chips on this board, and there is an SD card socket on the back..
- Compliance with SD specification Ver2.0, IDE/ATA-33 specification.Standard IDE interface interface: true-IDE mode, and supports DMA-33 transfer mode.
- The IDE interface is a 44-pin/2.0mm male connector..
- The SD card can become an OS and application software that can directly start the device.
- Support DMA and ULTRA DMA mode, suitable for DOS, NT4, WINDOWS98SE, ME, 2000, XP, VISTA, MAC, Linux systems..
- Installation method:First install the SD card into the product slot, and then connect the hard drive data cable to the interface of the notebook hard drive. It can be operated and used after the power-on test is normal..
- Note: for soft routing, the size of the SD card should be within 1G. For example, if WIN98, WIN ME, WINXP, and the system are installed, the SD card capacity should be more than 2GB. If you require high speed, please choose a high-multiplier flash memory card.Maximum support 128G SD card..
Check StockSupermicro X7DA8 Intel 5000X Greencreek Extended ATX DDR2 ECC FB-DIMM Dual 771-pin LGA Sockets Motherboard
- CPU: Dual 771-pin LGA Sockets Supports Intel 64-bit Dual-Core Xeon Processor 5000X sequence upto 3.73GHz.
- Chipset: Intel 5000X (GreenCreek) chipset & MCH + PXH-V + ESB2.
- Memory: 8x 240pin DDR2-667/533 DIMMs, Dual Branch Memory Bus, ECC/FB-DIMM, Upto 32GB.
Check StockSinLoon SCA 80 Pin to 68 50 Pin SCSI Adapter SCSI 68 Female Adapter SCSI 80 Male Adapter for Data Transfer (50/68/80)
- Product Name: SCSI three card 68-80-50 ide SCSI hard disk adapter 68 Pin Female to 80 Pin Male to 50 pin IDE (SCSI 80 pin, 68 pin, 50 pin adapter).
- SCSI 68 Female Adapter card is used to convert these interfaces. For example, some adapter cards can convert male to female, and some can convert 50 pin interface to 68 pin interface. In this way, 50 pin low-speed SCSI devices can be connected to 68 pin SCSI interface..
- SCSI Three Turn Card. Jumper setting for 16 SCSI IDs. Spindle synchronous, delay start & remote start..
- The main function of the adapter card is to convert different SCSI interfaces, for data transfer between 2 SCSI drives..
- Note: It's a 50 pin IDE,Only available on industrial server IDE 50-pin motherboards. not a 40 pin or 44 pin ide of an ordinary computer. It can't be used on an ordinary computer. Please pay attention!.
Check StockAITIAO 2Pcs SD Card to 2.5 Inch IDE Adapter SD SDHC SDXC MMC Memory Card Converter TF Memory Card to IDE 44Pin Male Adapter to Laptop HDD for DOS/Linux/Windows 98SE, Me, 2000, XP and for Vista.
- The SD Card to 2.5 Inch IDE Adapter Adapt SD/MMC flash memory card to a super compact, SD card has the characteristics of small size, large capacity, anti-seismic and moisture-proof, high-temperature resistance, stable performance, permanent and effective data storage, no noise, no seek error..
- Enables IT engineers and embedded technology enthusiasts to use SD/MMC card as a normal IDE 2.5" hard disk.Provides an alternative for data storage and transfer or test for motherboard, sound/audio/memory card, etc..
- Ideal for some devices that required a fast and easy bootable device such as POS. Be a SD/MMC card reader/writer.Compatible with SD, SDHC, SDXC & MMC specification.One 2.5" IDE hard disk driver 44pin male connector and one standard SD socket..
- IDE Adapter supports PIO, Multi-Word DMA and Ultra DMA data transfer mode.Supports boot function.No external power required and powered from IDE interface.Easy installation and no driver required.Mini board design and no space wasted.Dimensions: 36mm x 52mm..
- Attention: This SD Card to 2.5 Inch IDE Adapter does not support hot-swap of CF cards, so please turn off power when changing cards..
Check Stock945 Micro ATX Gaming Motherboards,Computer Motherboards Gaming DDR2 PCIE16 Slot SATA IDE Interface,Build in Network Card Sound Card
- Micro ATX Architecture: The Motherboards size is 220 x 170mm M ATX Architecture, All solid State panels, good materials are preferred for long‑term durability..
- Multi Phase Power Supply: The power supply has 24 pin and 4 pin interface, which is stable,accurate and evenly distributed, and the heat load of various power supply chipsets improves the performance of the CPU..
- Various Expansion Interfaces: This computer motherboards support VGA , PCI and COM interface, DDR2 RAM, SATA/ IDE Interface..
- Solid State Capacitors: Solid‑state capacitors have stable performance and greatly extend the life of the motherboard..
- Built In PCI: This micro atx gaming motherboard has PCI‑E 16 slot, PCI slot is an expansion slot based on PCI local bus..
Check Stock32GB KingSpec 2.5-inch PATA/IDE SSD Solid State Disk (MLC Flash) SM2236 Controller
- This adapter using JM20330 Serial ATA Bridge Chip..
- 50mm (1.8 inches) MSATA Mini PCI-E SATA SSD to 2.5 inches Notebook IDE Adapter with case. .
- Used with MSATA(Mini PCI-E SATA) SSD ONLY!.
Check StockGenuine Dell Motherboard For Optiplex GX520 Tower Systems Part Number: WG233, H8052
- Genuine DELL P4 Motherboard for the OptiPlex GX520 Small Form Factor (SFF).
- Intel 945G Express ChipSet | Socket LGA775 Supporting Pentium 4 Processors | Hyper-Threading Technology Support 800/1066 MHz system bus.
- 2 DIMM Slots for DDR2 400/533MHz | 4 GB MAX system memory | Integrated Intel 950 Graphics Accelerator | Integrated 10/100/1000 Lan | Integrated AC97 Sound.
- 1 SATA Hard Disk Connector | 1 ATA-66/100/133 SFF IDE Hard Disk Connector | 1 PCI Card Slot | 6 USB 2.0 Ports | Audio Ports for line-in, line-out, and microphone | 1 Serial/1 Parallel Port.
- Dell Compatible Part Numbers : PY428, PJ478, C8810, PY186, XG309, JD992.
Check StockZyyini 945 Micro ATX Gaming Motherboards,DDR2 PCIE16 SATA IDE Interface Desktop Mainboard,Computer Motherboards Build in Network Card Sound Card
- Micro ATX Architecture: The Motherboards size is 220 x 170mm M ATX Architecture, All solid State panels, good materials are preferred for long‑term durability..
- Multi Phase Power Supply: The power supply has 24 pin and 4 pin interface, which is stable,accurate and evenly distributed, and the heat load of various power supply chipsets improves the performance of the CPU..
- Various Expansion Interfaces: This computer motherboards support VGA , PCI and COM interface, DDR2 RAM, SATA/ IDE Interface..
- Solid State Capacitors: Solid‑state capacitors have stable performance and greatly extend the life of the motherboard..
- Built In PCI: This micro atx gaming motherboard has PCI‑E 16 slot, PCI slot is an expansion slot based on PCI local bus..
Check StockPSCCO CF Card to 40-Pin IDE Adapter Compact Flash CF to IDE Bootable Converter
- Supports CF-I and CF-II two types of cards:IBM micro hard disk that also supports CF-II interface..
- The IDE interface is a 40-pin/2.54mm female connector:this card can be plugged directly into the IDE socket..
- Standard IDE interface:true-IDE mode,and supports DMA-33 transfer mode.Power supply from 5.0V or 3.3V,Select the appropriate supply voltage according to your CF card..
- Widely used in notebook computers,personal digital assistants(PDAs), portable instruments,or industrial equipment..
- Package included:1pcs CF to 40-Pin IDE Adapter.It has the characteristics of low power consumption and no damage..
Check StockBEYIMEI PCIe SATA Card 2 Ports, PCI-E to SATA Expansion Card,6Gbps PCI-E (2X 4X 8X 16X) SATA 3.0 Controller Card for Windows10/8/7/XP/Vista/Linux,Support SSD and HDD
- Support hot swap, plug and play, easy to use..
- Comply with Serial ATA 3.0 specification, backward compatible with SATA2.0, SATA1.0, conform to PCI-Express v2.0 specification, and backward compatible with PCI-Express v1.0..
- 【2 Port SATA 3.0】support AHCI 1.0 mode and IDE mode, bus interface: PCI-Express x1 slot, expansion interface: 2 SATA 3.0 interfaces.
- 【Support system】: Win10 / Win8 / Win7 / WinXP /Vista/Linux.System requirements: There is an available PCI Express X1 slot, while supporting PCI-E X2 X4 X8 X16.
- Support 6.0 Gbps, 3.0 Gbps and 1.5 Gbps of communication speed.
Check StockPCIe SATA Card 4 Ports 1X, PCI Express SATA 3.0 Controller Expansion Card 6 Gbps, SATA 3.0 PCIe Card SATA III Gen3 Adapter Riser Card with 4 SATA Cables &Low Profile Bracket Support 4 SATA 3.0 Devices
- ✅PCIE 3.0 GEN3 SATA 2-port expansion card, provides 2 SATA 3.0 ports and 2 SATA cables, and supports SATA 3.0 version transfer speeds up to 6 Gbit/s..
- ✅【Product Chip: PCI-E 3.0 GEN3 Chipset: JMICRON + JMB582, improve the stability and compatibility of PCIE SATA card. Support IDE/AHCI programming interface..
- ✅【Simple installation, plug and play, support hot swap. Just plug it in and start working..
- ✅PCIE 1X SATA card, compatible with PCIE1X/4X/8X/16 slots. The card also features a heatsink for long-lasting high temperature resistance..
- ✅Compatible system: Windows7/8/10/XP/2003/2008/Linux. Please let us know if you have any questions..
Check Stock