Top Pci To Sata

SATA Card 8 Port, PCIE to SATA 3.0 Controller Expansion Board with Low Profile Bracket, SATA3.0 Interface Expansion Card for Windows 7/8/XP/10

  • 【PCI-E to SATA 3.0 expansion card】Use with SATA3.0 data cable for best results. with 8 x SATA3.0 interfaces expansion interface..
  • 【SATA Controller】Compatible with SATA6G, 3G and 1.5G hard drives. Fit for Windows 7/8 / XP / 10 Fit for Ubuntu support system, PCI-E 1X 2X 4X 8X 16X interface..
  • 【Serial ATA 3.0】Compliant with Serial ATA 3.0 specification, backward compatible with SATA2.0 SATA1.0.
  • PCI-Express v2.0 compatible, backward compatible with PCI-Express v1.0..
  • 【AHCI1.0 Mode and IDE Mode】Supports AHCI1.0 mode and IDE mode, native command queue (NCQ), FIS based on port multiplier switch or command switching, and hot plug..
  • 【6.0 Gbit/s / 3.0 Gbit/s / 1.5 Gbit/s Transmission】Supports communication speeds of 6.0 Gbit/s, 3.0 Gbit/s and 1.5 Gbit/s.
  • supports Gen 1i, Gen 1x, Gen 2i, Gen 2m, Gen 2x and Gen 3i..
Check Stock

ACASIS PCIe SATA Card, 8 Port with 8 SATA Cables and 2 Power Splitter Cables, SATA 3.0 Controller Expansion Card with Standard Profile Bracket, 6Gbps PCI-E X1 Host Controller Card Up To 80TB Expansion

  • Add four independent SATA-I ports to your PCI equipped computer and enjoy the benefits of the optional software RAID configuration for added speed and/or data security with this adapter card.（Note it is PCI card,NOT PCIE card )..
  • Plug the SATA RAID PCI card into the PCI slot on your motherboard, and connect SATA devices to the ports on the PCI card using the cables provided, or standard SATA cables of adequate length..
  • The card comes with an optional RAID utility which lets you configure a RAID 0 RAID 1 or RAID 0+1 setup on two or more of the SATA ports..
  • You can have one RAID 0 or 1 setup and two independent SATA drives two RAID 0 or 1 sets or a single RAID 0+1 set..
  • SIL3114 chipset and supports two modes: 32-bit at66MHZ and 64-bit at 133MHZ..
Check Stock

LIANSHU 3Pack 6 Pin PCI-e to SATA Power Cable - 8 Inches

  • LIANSHU 6 Pin PCI-e to SATA Power Cable - 8 Inches ,SATA15Pin M To 6Pin HSG.
  • Cable material: ULStandard. 18 AWG Full 100%Copper.
  • PCI EXPRESS VIDEO CARD POWER CABLE Adapter Connects A PCIe Video Card To A Power Supply With A Spare SATA Power Connection,PSU UPGRADE SAVER Power Cable Provides An Option For A Power Supply Without A PCIe Connection For GPU Power..
  • HSG 6 Pin PCIe To 15 PIN SATA Female To Male Cable Provides A Convenient Solution For Low Power Video Graphics Card That Can Be Powered From A Single SATA Power Connection.STURDY GRAPHICS CARD Power Cable Has A Male SATA Connector With Keyed Rails And A Female PCI Connector With A Latch For A Secure Connection On Each End To Prevent Accidental Disconnections.
  • VIDEO GRAPHICS CARD Compatible With Graphics Cards From Popular Manufacturers From ASRock, ASUS, EVGA, And Gigabyte.
Check Stock

I/O Crest 4 Port SATA III PCI-e 2.0 x2 HyperDuo RAID Card Marvell 9230 Chipset SI-PEX40057

  • Compatible with SATA 6G, 3G and 1.5G Hard Drives.
  • PCI-Express x1 Interface is Compatible with PCI-Express x2, x4, x8, and x16 slots.
  • HyperDuo is configured with at least 1 hard disk drive (HDD) and up to 3 solid state drives (SSD). By embedding automated tiering technology into the chipset..
Check Stock

Supermicro DDR3 1600 LGA 1366 Server Motherboard X9DBL-IF-O

  • Supports Intel Xeon E5-2400 series Processors.
  • Memory: 6x 240pin DDR3-1600 DIMM Slots, Supports up to?192GB ECC/REG Memory?or up to 48GB ECC/Non-ECC Un-buffered Memory.
  • SATA: 8x SATA2 Ports, 2x SATA3 Ports, Supports RAID 0, 1, 5, 10.
Check Stock

Asus M4N68T-M V2 Socket AM3/ GeForce 7025/ DDR3/ A&V&GbE/ Micro ATX Motherboards

  • 4x SATA2 Ports, Support RAID 0, 1, 5, 10, JBOD.
  • Chipset: nVidia GeForce 7025/ nForce 630a.
  • CPU: Socket AM3 Support AMD Phenom II/ Athlon II/ Sempron 100 Series Processors.
  • Memory: 2x 240pin DDR3-1800(O.C.)/1600(O.C.)/1333/1066 DIMMs, Dual Channel, ECC/Non-ECC Un-buffered, Max Capacity upto 16GB.
Check Stock

Supermicro A2SDi-8C+-HLN4F Motherboard

  • 7x PCI-E slots total: 2 PCI-E 3.0 x8, 2 PCI-E 3.0 x8 (in x16), 2 PCI-E 3.0 x4 (in x8) or 1 x8 + 1 x0 (auto-switch), & 1 PCI-E 2.0 x4 (in x8).
  • Memory: 8x 284pin DDR4-2133/ 1866/ 1600/ 1333 DIMM Slots, Supports up to 512GB ECC Load Reduced Memory or up to 256GB ECC/REG Memory.
  • Slots: 2x PCI-Express 3.0 x16 Slot (run at x8), 4x PCI-Express 3.0 x8 Slots (two run at x4), 1x PCI-Express 2.0 x8 Slot (runs at x4).
Check Stock

ASUS LGA 1155 Cooling Fan (Copper Core) for All Intel LGA1155 Processor

  • CPU: LGA1155, Supports 3rd and 2nd Generation Intel Core i7/ i5/ i3/ Pentium/ Celeron Processors.
  • Memory: 4x DIMM Slots, Dual Channel, Max Capacity up to 32GB.
  • DDR3 2400(O.C.)/2200(O.C.)/2133(O.C.)/2000(O.C.)/1866(O.C.)/1800(O.C.)/1600/1333 MHz.
  • Slots: 2x PCI-Express 3.0 x16 Slots (x16 or dual x8).
  • 1x PCI-Express 2.0 x16 Slot (runs at x4).
Check Stock

BEYIMEI PCIe SATA Card 2 Ports, PCI-E to SATA Expansion Card,6Gbps PCI-E (2X 4X 8X 16X) SATA 3.0 Controller Card for Windows10/8/7/XP/Vista/Linux,Support SSD and HDD

  • Support hot swap, plug and play, easy to use..
  • Comply with Serial ATA 3.0 specification, backward compatible with SATA2.0, SATA1.0, conform to PCI-Express v2.0 specification, and backward compatible with PCI-Express v1.0..
  • 【2 Port SATA 3.0】support AHCI 1.0 mode and IDE mode, bus interface: PCI-Express x1 slot, expansion interface: 2 SATA 3.0 interfaces.
  • 【Support system】: Win10 / Win8 / Win7 / WinXP /Vista/Linux.System requirements: There is an available PCI Express X1 slot, while supporting PCI-E X2 X4 X8 X16.
  • Support 6.0 Gbps, 3.0 Gbps and 1.5 Gbps of communication speed.
Check Stock

Asus P8Z77-V LK Intel Z77 DDR3 LGA 1155 Motherboards

  • CPU: LGA1155, Supports 3rd and 2nd Generation Intel Core i7/ i5/ i3/ Pentium/ Celeron Processors.
  • Memory: 4x DIMM Slots, Dual Channel, Max Capacity up to 32GB.
  • DDR3 2400(O.C.)/2200(O.C.)/2133(O.C.)/2000(O.C.)/1866(O.C.)/1800(O.C.)/1600/1333 MHz.
  • Slots: 2x PCI-Express 3.0 x16 Slots (x16 or dual x8).
  • 1x PCI-Express 2.0 x16 Slot (runs at x4).
Check Stock

ASHATA PCIE SATA Card,PCI-E to SATA3.0 Controller Expansion Board 8-Port SATA3.0 Interface Expansion Card,PCI-E SATA Adapter Card Fit for Windows 7/8/XP/10

  • 【PCI-E to SATA 3.0 Card】Supports AHCI1.0 mode and IDE mode, native command queue (NCQ), FIS based on port multiplier switch or command switching and hot plug..
  • 【Compatible with SATA6G/3G /1.5G Hard Drives.】Supports communication speeds of 6.0 Gbps, 3.0 Gbps and 1.5 Gbps.
  • supports Gen 1i, Gen 1x, Gen 2i, Gen 2m, Gen 2x, and Gen 3i..
  • 【Wide Compatibility】Compliant with Serial ATA 3.0 specification, backward compatible with SATA2.0 SATA1.0.
  • PCI-Express v2.0 compliant, backward compatible with PCI-Express v1.0..
  • 【Note】PCI-E must have a slot above V2.0, V1.0 will not exceed 250M, PCI-E can be X1 or X16 as long as it is V2.0 version, there is spare X16 slot directly into X16 slot on..
  • 【Tips】User with SATA3.0 data cable for best results.Any questions,Please feel free contact us,we will provide you with high quality after-sales service..
Check Stock

I/O Crest 4 Port SATA III PCI-e 2.0 x1 Controller Card Marvell 9215 Non-Raid with Low Profile Bracket SI-PEX40064

  • Compatible with SATA 6G, 3G and 1.5G Hard Drives.
  • PCI-Express x1 Interface is Compatible with PCI-Express x2, x4, x8, and x16 slots.
  • HyperDuo is configured with at least 1 hard disk drive (HDD) and up to 3 solid state drives (SSD). By embedding automated tiering technology into the chipset..
Check Stock