Top Pcr Tube Heating Block

Water Cooling Kit,DIY PC Water Cooling Kit,PC 240mm Heat Sink CPU Water Block LED Fan Computer Cooling Kit Water Chiller Water Cooling Systems

  • ...m is visible.Water Pump: Waterproof, stable, high quiet, long life. 240mm Heat Sink: Provide the excellent heat dissipation, as you need for highly overclocked desktop processors..
  • LED Cooling Fan: The excellent performance cooling fan offers a high air static pressure with lower noise.6 Rigid Tube: Can be bent when heating, also can be cut to meet your need..
  • 1 * 240mm black heat sink (with screw bag).
  • Suitable tube: Diameter of 8-10mm/ 0.3-0.4in.
  • Application: water cooling system heat exchange.
  • Surface treatment: powder coating.2 * LED fans.
  • Power supply interface: large 4Pin small 3Pin.
  • Description: Universal for INTEL / AMD Dual Platform (For INTEL 775, 1150, 1155, 1156, 1366) (For AMD: AM2, AM3, AM3 ).
  • Note: Do not support for AMD4CPU CPU block, bracket supports for AMD INTEL mainstream hole installation..
  • 1 * Cylindrical water reservoir (with plastic brackets * 2, metal brackets * 2, screw bag * 1).
Check Stock

Bio Plas 0061 Assorted Polypropylene Microcentrifuge PCR Tube Rack, 80-Well, Pack of Five

  • Set of five 80-well microcentrifuge PCR tube racks accommodates 0.5mL, 1.2mL, and 2.0mL microcentrifuge tubes or PCR tubes.
  • 16 x 5 configuration for freezing, storage, transport, and benchtop use.
  • Autoclavable at 250 degrees F and 15psi for 15 minutes.
  • Racks are 9" long, 2-1/16" deep, and have 10.5mm well diameter.
Check Stock

Four E's Scientific Mini Dry Bath Incubator with 15 x 1.5ml Heating Block, LED Display, High Temperature Precision, Timing Control for Laboratory

  • 【PreciseTemperature Control】The temperature of this Mini Lab Dry Bath Incubator Heater is up to 100°C and the temperature control accuracy is ±0.5°C,display accuracy ±0.1°C. Room temperature to 100°C in less than 15 minutes..
  • 【5 Program Setups】The system can save 5 sets of programs of the temperature and time,0~99h59min.When Mini Digital Dry Bath Incubator with Heating Lid is powered on but not when working, short press the button of “Prog.” to select the 5 default programs from P1 to P5.Program for quick operation..
  • 【More Efficient】Our Mini Digital Dry Bath Incubator with Lid,which is provides quicker heating and higher heating efficiency.The transparent cover can also better observe the progress of the test..
  • 【Heating Block】Including 15x1.5mL Heating Block x 1,hole diameter is Φ10.8mm/0.43inch,the hole depth is 37mm/1.46inch.Suitable for 1.5ml conical centrifuge tube.Snuggly holds the test tubes enabling precise and uniform heating..
  • 【LED Display】This Heating Dry Bath Incubator has Intuitive LED digital display, easy to operate.Low operation voltage (12v)..
Check Stock

4titude FrameStar 384 Well Skirted PCR Plate, Frosted Wells, Clear Frame

  • Designed for use on the majority of PCR, qPCR and sequencing instruments with 384 well block.
  • Compatible with robotic systems and standard multichannel pipettes.
  • fit for use with ABI/LifeTechnologies qPCR instruments.
  • Frame: PC, rigid for added mechanical stability & improved seal integrity.
  • Wells: PP, thin-walled for optimum PCR/qPCR results.
  • 003c30 µl working volume, 55 µl total well capacity.
  • Free from DNase, RNase, human genomic DNA, and endotoxin/pyrogen.
Check Stock

Extragene PCR Tube with 0.2ml Low Profile Thin Wall, Strip of 8 Tubes, Flat Caps DNase and RNase Free Pk x 125 Strips

  • Optimized Material for PCR (Mixed PP) The Combination of PP materials containing our know-how makes the excellent heat conductivity and high efficiency of amplification. It is also stable at low and high temperatures of -80℃~121℃..
  • Soft Opening and Closing / Excellent Sealing HM PCR tube has a very smooth opening and closing sensitivity. Existing PCR tubes with hard lids that frequently caused the fingertip pain. Its improved lids solve this problem and no evaporation with prefect sealing..
  • High Performance / Reasonable Price Production and packaging at the latest automation facilities ensure stable quality. It is also significantly cheaper and more capable than the products of famous foreign brand..
  • RNase/DNase Free Non-Pyrogenic Endotoxin Free.
Check Stock

Almay Smart Shade Cc Luminous Primer - Clear - 0.1 oz by Almay Cosmetics

  • A liquid foundation rich in texture with medium, buildable coverage blends effortlessly smoothly onto skin, delivering instant hydration and a naturally dewy finish that feels lightweight.
  • Enriched with an Prebiotic Complex designed to reinforce skin's healthy barrier.
  • also has antioxidant vitamin E, and broad spectrum SPF 25 sunscreen to protect against harmful UV rays.
  • Sustainable packaging: Tube made from 27% PCR materials, cap made from 43% PCR materials.
  • Formulated without added parabens, phthalates, SLS, mineral oil, DMDM Hydantoin, formaldehydes, and Triclosan.
  • Suitable for sensitive skin and as always, hypoallergenic.
  • Dermatologist tested, clean, cruelty free, fragrance free.
Check Stock

Official Upgrade Assembled Extruder Hotend with Capricorn Bowden PTFE Tubing with Silicone Cover×3 and 0.4mm Nozzle×3 for Creality Ender 3 V2 Ender 3 Ender 3 pro 3D Printer Not for Ender 5

  • 100% Creality Original - Recently Creality has 2 kinds of heating block. Golden and Silver ones both are 100% Creality Original. The silver ones work....
  • Capricorn PTFE tubing - About 14 inch long. Due to its high lubricity and high-temperature resistance, it improves the printing quality and accuracy..
  • Pluggable: the heating tube and temperature thermistor that from control box, connect them with terminal housing and pin. Then you could plug the....
  • With more terminal housing and pins as spare parts, in case fail installation and waste ..
  • MK8 Extruder Hot End kit, white wire was temperature thermistor, braided wire was heating tube 24V40W..
Check Stock

HICTOP Ender 3 Hotend Ender 3 Pro Hotend 24V 40W Full Assembled Extruder Kit Accessories with Silicone Cover for Ender 3, Ender 3 Pro 3D Printer

  • 1 Fully assembled extruder, Plug and Play Ender 3 Pro Hotend, you do not need to cut it..
  • 2 Compatible with Ender 3, Ender 3S, Ender 3 Pro and similar 3D printer..
  • 3 There are 2 fans, fan covers, heat block, cooling block, nozzle, throat pipe, connector, teflon pipe, thermistor sensor, heating tube, silicone cover, etc..
  • 4 24V high speed fan, lose heat quickly and efficiently.
  • nozzle and tube connect seamless, prevent material leaking and blocking..
  • 5. Silicone Cover is provided to help keep temperatures on the hotend much more stable and this will result in higher print quality and consistency.
Check Stock

Almay Skin Perfecting Healthy Biome Foundation Makeup with Prebiotic Complex SPF 25, Hypoallergenic, -Fragrance Free, 100 Fair, 1 fl. oz.

  • A liquid foundation rich in texture with medium, buildable coverage blends effortlessly smoothly onto skin, delivering instant hydration and a naturally dewy finish that feels lightweight.
  • Enriched with an Prebiotic Complex designed to reinforce skin's healthy barrier.
  • also has antioxidant vitamin E, and broad spectrum SPF 25 sunscreen to protect against harmful UV rays.
  • Sustainable packaging: Tube made from 27% PCR materials, cap made from 43% PCR materials.
  • Formulated without added parabens, phthalates, SLS, mineral oil, DMDM Hydantoin, formaldehydes, and Triclosan.
  • Suitable for sensitive skin and as always, hypoallergenic.
  • Dermatologist tested, clean, cruelty free, fragrance free.
Check Stock

Almay Skin Perfecting Healthy Biome Foundation Makeup with Prebiotic Complex SPF 25, Hypoallergenic, -Fragrance Free, 130 Medium, 1 fl. oz.

  • A liquid foundation rich in texture with medium, buildable coverage blends effortlessly smoothly onto skin, delivering instant hydration and a naturally dewy finish that feels lightweight.
  • Enriched with an Prebiotic Complex designed to reinforce skin's healthy barrier.
  • also has antioxidant vitamin E, and broad spectrum SPF 25 sunscreen to protect against harmful UV rays.
  • Sustainable packaging: Tube made from 27% PCR materials, cap made from 43% PCR materials.
  • Formulated without added parabens, phthalates, SLS, mineral oil, DMDM Hydantoin, formaldehydes, and Triclosan.
  • Suitable for sensitive skin and as always, hypoallergenic.
  • Dermatologist tested, clean, cruelty free, fragrance free.
Check Stock

5 Pcs Tube Rack Double Panel Microcentrifuge PCR Centrifuge Tube Holder, 60-Well

  • SIZE: 5 Pcs tube racks 60-well per side (12mm diameter and 8mm diameter).
  • COLOR: Green, blue, orange, purple and red. Show as the picture..
  • SIZE: Racks are 9" long, 2-1/16" deep, and have 10.5mm well diameter..
  • SUITABLE SIZE:These tube racks accommodates 0.5mL, 1.5mL, and 2mL centrifuge tubes or PCR tubes and 1.8ml cryotubes..
Check Stock

Mini Desk-top Centrifuge Set, Digital, High-Speed from 3000 RPM to 10000 RPM, 2 Rotors for 8 x 2.0/1.5 ml and 2 x 8-Strip PCR Tubes, 2 Sets of Adapters for 0.2ml and 0.5ml Tubes, 110V (Natural Color)

  • Closed-loop control technology, accurate speed control of 3000-10000 rpm.
  • Equipped with two rotors and various adapters, it’ s suitable for 0.2ml, 0.5ml, 1.5ml, 2.0ml micro centrifuge tubes and 0.1ml or 0.2ml PCR 8-strip tubes. Max. capacity up to 8×2ml micro centrifuge tube or 16×0.2ml PCR tube.
  • High-performance DC motor, powerful engine, quiet when running, noise003c 50dB.
  • Speed and time adjustable for various lab experiments.
  • Clear LED display to show time and speed.Wide-voltage range (110-240 V) to prevent interference to the running accuracy..
  • One year warranty with US-based professional customer support..
Check Stock