Top Pe Corrugated Pipe Machine

Flex-Drain ADP53102 Downspout Adaptor, Landscaping Drain Pipe Adapter 3 by 4 by 4-Inch 2 Pack

  • Compatible with most traditional 3-inch and 4-inch corrugated pipe and 4-Inch PVC..
  • Installs faster than traditional corrugated pipes and requires 80% less space for transport and storage..
  • FLEX-Drain's unique flexibility allows it to fit in tight spaces and curvy places..
  • 30-Percent higher load-bearing rating than standard corrugated pipes, Minimum working temperature of -50°F and a maximum working temperature of 150°F.
  • Integrated soil-tight fittings lock securely and are perfect for French drains, downspout drain pipe and more!.
Check Stock

6 Pieces Balaclava Face Cover Sun Protection Cover Breathable Long Neck Cover for Outdoor Activities (Black, White, Coffee, Dark Blue, Navy Blue, Grey)

  • Protect your drainage system by using a grate on top of drain pipe to block debris from entering and potentially clogging the pipeline while letting excess surface water flow through. Ideal for draining light water flows from small lawns, landscaped areas, walkways, and patios.
  • Fits 4 in. Sewer and Drain Pipe & Fittings, 4 in. Single-Wall Corrugated Pipe, 4 in. Triple-Wall Pipe. 12 GPM flow rate. 3.9 sq. in. open surface area. Rated for NDS Class A loads (up to 60 psi) when properly installed—recommended for pedestrians, bicycles, and wheelchair traffic.
  • Place on top of drain pipe or drain fitting for a soil-tight fit. 4 in. Round Drain Grates are available in a variety of colors.
  • NOTE : This fixture NDS part#11 is a 4” round grate to fit 4” S & D fitting as well as Pipe in S & D as well as corrugated pipe.
Check Stock

Honeywell Natural Gas Permasert Version 2.0 Stab Coupling - 1 CTS - PN PC50103

  • Product: 1" CTS Stab Coupling Permasert Version 2.0 P/N: PC50103.
  • Details: 1-1/8" OD, 0.090/0.099/0.102 wall.
  • Fits line size: 1" inch CTS PE Tubing (1-1/8" Outer Diameter).
  • Used on Medium Density (yellow) PE Polyethylene plastic pipe for repairs or joining lengths together. Works for Natural Gas (NG) or Propane (LPG).....
  • IMPORTANT NOTE: There are various pipe sizes described as 1 Inch. This for CTS pipe not IPS pipe. These are different pipe sizing standards, so please....
Check Stock

1 CTS Elster Natural Gas Permasert Line Chamfering Tool Version 2 PN 58504

  • Line size: 1 inch CTS Poly Pipe (1-1/8" Outer Diameter) *Please review sizing diagram..
  • Creates a proper O.D. and I.D chamfer which prevent seal damage when stabbing of the PE piping into New 2.0 Permasert couplings. REQUIRED to properly....
  •  IMPORTANT NOTE: There are various pipe sizes described as either IPS or CTS. These are DIFFERENT pipe sizing standards with different OUTER and....
Check Stock

TUF-Tite 24' Heavy Duty Flat Riser Lid for TUF-Tite Risers or Corrugated Pipe Risers

  • 24" Diameter heavy duty lid has outside diameter of 25" With inside diameter of 24"..
  • Ideal for septic tanks risers and corrugated pipe risers only..
  • Will only work with Tuf-Tite systems (will not fit on competitor brand risers)..
  • Will not fit directly onto a septic tank is designed to fit on risers and corrugated pipe risers only..
Check Stock

Woodstock D4202 2-Inch by 10-Foot Clear Hose

  • ✔ 1-1/2" P-trap is one of the double sink drain pipe fittings, used to connect the kitchen sink drain and the garbage disposal. Also suitable for the sink of bathrooms, toilets, bathtub and salons..
  • ✔ The drain pipe is made of flexible material and corrugated stretch design, adjustable between 7.8 and 25.6 inches. It can be bent and stretched at will in a narrow sink tank..
  • ✔ Made of professional engineering polypropylene material, which has corrosion resistance, 212°F high temperature resistance, acid and alkali resistance, and not easy to crack..
  • ✔ The inner diameter of the nut at both ends of the P-trap is 1.78 "/ 45.2mm, which is convenient to connect with the drain connector. The diameter of the corrugated hose is 1-1/2inch. (Please make sure the diameter of your drain connector is 1.78" before purchasing.).
  • ✔ When installing, put on silicone sealing rings to prevent water leakage. You can fixed the pipe with our S-shaped buckle to maintain the shape..
Check Stock

General Tools Hose and Tubing Cutter #115 - Cuts up to 2 Inch Flexible Rubber, PVC, ABS and Polyethylene Tubing

  • CUTS RUBBER TUBING: Cuts up to 2-inch rubber hose or tube..
  • CUT PE OR ABS PIPE: Cuts up to 1-1/2 inch PE and ABS pipe..
  • CUTS PVC PIPE: Cuts up to 1-1/4 inch PVC pipe..
  • HOLDS TIGHT: The curved holder supports the hose or tubing during square cuts..
  • LONG HANDLES: Long handles for added leverage..
Check Stock

PVC Cutter, Up to 2-1/2 inch, Ratchet-type PVC Pipe Cutter for Cutting PEX,PVC,PPR and Plastic Hoses,Suitable for Maintenance, Plumber and DIY Home worker (2-1/2\(Gray）)

  • ...tc),Great helper for home handy man, plumbers, electricians, and vehicle mechanics..
  • 【Heavy duty】: The tubing cutter blade itself is made of SK5 material with high strength and hardness. The surface is covered with Teflon coating,high hardness,smooth, sharp,Cutting quickly..
  • 【Ratchet design】: The pipe cutting machine adopts ratchet drive technology, cutting pipe with less effort and improving work efficiency. Pressing the self-locking during use can prevent the cutter from springing back, cutting the pipe faster, saving energy and safety.and the triangular convex point design at the blade can better cut the pipe..
  • 【Ergonomic design】: The bottom handle adopts ergonomic grip to protect the hand, which can make single stroke cutting quickly and easily, Suitable for long hours..
  • 【Safe and convenient for you】: Put the pipe to be cut into the corresponding knife edge, and continuously clamp and tighten the handle to easily cut the pipe. After use, just fasten the safety lock at the bottom, and the pipe cutting machine will become small and easy to carry or store..
Check Stock

Flexible Drain Pipe, Angle Simple Flexible 1-1/4

  • FIX ALIGNMENT OR OTHER PLUMBING PROBLEMS: bathroom sink drain extension pipe is adjustable to fix an offset or other difficult plumbing problems. Diameter of the top connection that attaches to a tailpiece is 1-1/4"(32mm), diameter of the bottom outlet is 1-1/4"(31mm). Please kindly check the size or measure your fixture before ordering..
  • FLEXIBLE & ADJUSTABLE CORRUGATION DESIGN: flexible corrugated pipe can be easily expanded and bended to an "U", "S" or other shapes, with maximum expanded length of 33-1/4"(845mm), 16-15/16"(430mm) long when compressed..
  • PREMIUM AND SOLID CONSTRUCTION: solidly constructed of thick and hard plastic with steel wires wrapped inside for durability, rustproof and corrosion resistant, strong and durable for long term use, not easy to split..
  • DEODORANT DESIGN: inner small plate automatically opens when draining water and automatically closed to prevent backflow. Black rubber washer creates a nice seal at the connection that helps with the smell..
  • FAST DRAINING & NICE CONNECTION: diameter of the corrugated pipe is 1-1/2"(38.5mm), large enough for fast draining, not easy to get clogged, snugly connect to a sink drain with the rubber connection without leaking..
Check Stock

Flexible Extension Drain Pipe, Angle Simple Flexible 1-1/4

  • FIX ALIGNMENT OR OTHER PLUMBING PROBLEMS: bathroom sink drain extension pipe is adjustable to fix an offset or other difficult plumbing problems. Inner diameter of the top connection that attaches to a tailpiece is 1-1/4"(32mm), outer diameter of the bottom outlet is 1-1/4"(31mm)..
  • FLEXIBLE & ADJUSTABLE CORRUGATION DESIGN: flexible corrugated pipe can be easily expanded and bended to an "U", "S" or other shapes, with maximum expanded length of 33-1/16"(840mm), 14-9/16"(370mm) long when compressed..
  • PREMIUM AND SOLID CONSTRUCTION: solidly constructed of thick and hard plastic with steel wires wrapped inside for durability, rustproof and corrosion resistant, strong and durable for long term use, not easy to split..
  • FAST DRAINING & NICE CONNECTION: diameter of the corrugated pipe is 1-1/2"(38.6mm), large enough for fast draining, not easy to get clogged, snugly connect to a sink drain with the rubber connection without leaking..
  • EASY TO APPLY & FUNCTIONAL REPLACEMENT: easy to connect the top part to a tailpiece of a standard sink drain stopper (diameter of the tailpiece should be 1-1/4" or 30-32mm), it's a great replacemenf for those metal ones..
Check Stock

SharkBite Corrugated Water Heater Hose Connector with Shut Off Valve, Push-to-Connect, Copper, PEX, CPVC SS3088FLEX18BV, 3/4 inch x 3/4 inch FIP, 18 inch, Stainless Steel

  • INSTALLS IN SECONDS: Corrugated Flexible Water Heater Connector requires no special tools, no soldering, or glue. Just push to create a watertight seal.
  • PERFORMANCE: Rated to 200 PSI and 200 Degrees F. Use in potable water and hydronic heating applications.
  • VERSATILTY: SharkBite connects Copper, PEX, CPVC, and PE-RT Pipe in any combination.
  • QUALITY: Only SharkBite's quality and performance is field-proven with more than 550 million connections. SharkBite is the only push-to-connect brand than can ensure a clean, leak-free connection.
  • RESIDENTIAL and COMMERCIAL: All SharkBite fittings meet the same standards for commercial and residential plumbing applications.
Check Stock

PVC Cutter 2-1/2\

  • 【WIDELY USED】: Can be used for PP-R pipes, PVC pipes, PE pipes, etc. Cuts Up to 2-1/2" Pipe Capacity.（When cutting PVC flexible pipe you should revolve the pipe whilst compressing）Ideal for Home Working and Plumbers.
  • 【EFFICIENT WORKING】: The cutting machine adopts ratchet drive technology to ensure automatic locking during the cutting process to protect the user from the rebound of the blade. The handle adopts the principle of leverage and is light in design, which greatly saves your strength.In the bottom of the tube cutter, there has a stainless buckle.When you don’t use it, you can buckle the safe lock. The tube cutter will become small to save space.
  • 【QUICK CHANGE BLADE SYSTEM】: Has a quick blade replacement system.You can easily and quickly replace the blade without any other tools,Also we provide one EXTRA replacement blade in Set. So you can have TWO blades with our PVC cutter.You can easily change blades in less than 10 seconds..
  • 【ERGONOMICS DESIGN】: The handle of the pipe cutter covered by soft rubber and is ergonomically designed which is non-slip,soft and comfortable,reducing fatigue on your hands and wrists. It can be operated for a long time and improve work efficiency..
  • 【SUPER QUALITY】: Pvc pipe cutters blade uses ....
Check Stock