Top Pe Foam Film Extruder

Caterpillar CAT Workforce Pickup Truck Cover - Waterproof All Weather Outdoor Car Cover 6-Layer Tough Protection for Winter Summer Rain Wind UV Snow for Full Size Crew Cab

  • Multi-Layer Composite Material Truck Cover Engineered to Protect Your Vehicle.
  • Reinforced Material – Multiple Heavy-Duty Layers with Enhanced Compounded Comfort Layer, Breathable Woven Polyester & More.
  • Protection Inside and Out – Sealed Scratch-Proof Lining for the Interior & 100% Waterproof, Durable Lining for the Exterior.
  • All Conditions – Preserve your Vehicle and Paint Against All Rain, Snow, Sun, Bird Droppings, Dust/Dirt - Approved for All Season Use (Spring, Summer, Fall, Winter).
  • 6 Layer Protection: (1) Outer Breathable Film, (2) Outer EVA Waterproof, (3) Waterproof Sealant Layer, (4) Particle Filter Film, (5) Enhanced PE Compound Foam Comfort Layer, (6) Inner Scratch-Proof Fleece Lining..
  • Sizing: Total Length 264" x 80" Width x 69" Height. The Distance From Front End to the Back of the Cab: 176".
Check Stock

Bowden Extruder V2.1 RNC Nano Coated Gear DDB Universal Geared Extruder for 3D Printer

  • Kit includes: 1pc Universal Geared Extruder w/ RNC Nano Coated Gear, 1pc Screws package, 1pc Installation tools package, 1pc Stepper motor mounting bracket.
  • Upgraded High performance extruder for 3D Printer.
  • Upgrade Highlights: 1. The position of the gears and the accuracy of all screw holes are calibrated. 2. Modified the new buckle, both sides of the V2.1 version of the DDB extruder support filament running thru in and out (it has no specified direction, and you are able to use either side of the material ports).
  • 3. The filament has an independent motion cabin inside the extruder. The new white filament guide inside the extruder is helping the filament running smoothly. 4. The new outer shell design with edge cut on the top of the extruder is reserved for the screw rod of Ender 3 printer. 5. Upgraded shell using new mixed materials.
  • ***Please make sure Gears are Installed and Precisely Aligned before printing, they will perform successfully.
Check Stock

Official 3D Printer Extruder Upgraded Aluminum Drive Feed Extruders Accessories for 3D Printer 1.75mm Filament Works with Creality CR-10 Series Ender 5 Series Ender 3 Series

  • ✔️Durable Material -- High quality aluminum alloy material and sandblast to surface oxidization, ensuring this red extruder is last for long term....
  • ✔️New Upgraded Design -- The upgraded red extruder has removed pneumatic joint so as to increase gear density, preventing the joint fracture....
  • ✔️Improved Performance -- The optimized extruder with metal extrusion and original hot-end kit pushes the filament into printer nozzle, greatly....
  • ✔️Install Easily -- You just remove the old Creality extruder & screw and then install the new red extruder. All the necessary accessories are....
  • ✔️Wide Compatibility -- Red extruder is suitable for Creality 3d printers accessories: Ender-3 series, Ender-5 series, CR-10S, CR-10, CR-10mini,....
Check Stock

5Aplusreprap Upgraded Dual Gear Extruder Single Connector for Creality Ender 3 CR10 / Pro CR-10S 3D Printer 1.75mm Filament (2 x Extra Gears), Right Hand

  • Package Include: Single connector upgraded dual gear extruder right-handed 1 Set - extruder aluminum block DIY kit with 4pcs quality stainless steel gears.
  • Main Material Instruction: Material for extruder: Aluminum Alloy . Material for the gear in extruder kit : Stainless Steel. For filament: 1.75mm.
  • Advantages: This is an upgraded version of CR10 extruder. A newly added extrusion wheel makes the filament feed more stable. The design of the double-concave gear also reduces the embossing of the consumables by the extrusion wheel..
  • Features: The mould steel spring is very rigid, strong in pressure and very durable..
  • Tips: For most Ender/CR Series 3D Printers, please choose the right-handed extruder..
Check Stock

Itech Series 100 Hockey Shoulder Pad Junior Medium

  • Bicep Guard: Adjustable molded component.
Check Stock

Winnwell AMP700 Senior Hockey Shoulder Pads (Small)

  • Bicep Guard: Adjustable molded component.
Check Stock

Redrex Ender 3 Extruder Bowden Aluminum Upgraded with 40 Teeth MK8 Drive Gear Kit Compatible with Creality Ender 3V2 /Ender 3 Pro/CR-10 Series and Other Reprap Prusa 3D Printers [Right Hand]

  • 【Application】:This metal extruder is compatible with Creality Ender 3 V2,Ender 3 Pro,Ender 3,CR-10,CR-10 S4, CR-10 S5, CR-10 Mini, CR-10S, CR-10....
  • 【Direct Drive Extruder】:The upgrade extruder supports direct extrusion.A direct drive extruder improves extrusion and retraction by removing the....
  • 【Filament】：The extruder feeder supports PLA/ABS/Wood/Hips/Flexible/PTEG,with 40 teeth drive gear feeds the 1.75mm filament very smoothy..
  • 【Durable Feeder】:The extruder feeder is made of heavy-duty aluminum alloy material,which is more durable and stable than the plastic one..
Check Stock

Wham-O Snowboogie Alpine Rocket 48" (2 Pack) | Double Rider | PE Foam Sled with Soft Handles | Slick Bottom for Speed & Control | Snow Sledding for Adults & Children | (2 Pack)

  • ALPINE ROCKET 48": Our sleds are artistically designed with dynamic graphics for the holidays! Take your board everywhere it's light enough to carry up the steepest hill for the best ride!.
  • PE FOAM CORE: This single rider PE foam core sled is perfect for your winter getaway during the holidays with the family. It's made of durable light foam that can be carried anywhere by children or adults with ease..
  • ESPECIALLY DESIGNED FOR SNOW: This Snowboogie was especially designed with snow sledding in mind, we've made it easy to carry and gave it a slick bottom to give the rider speed and control..
Check Stock

Creality Upgraded MK-8 Metal Feeder Extruder Frame Aluminum Gray Bowden Extruder Drive for Creality Ender 3/3 Pro/3V2/5/5 Plus, CR-10 Series, CR -10S/20/20 Pro 3D Printer

  • WIDE APPLICATION: The extruder feeder drive is compatible with nearly all models of 3D printers. No need to change stepper motors or other mounting hardware. Suitable for Creality 3D Printers Ender 3/3 Pro, Ender 3 V2, Ender 3 Max, Ender 5/5 Plus/5 Pro, CR-10, CR-10 V2, CR-10 Max, CR-10 S4, CR-10 S5, CR-10S, CR-10 Plus, CR-X, CR 20/20 Pro..
  • ADVANTAGES: Pushing the filament into the printer nozzle with more pressure to improve the performance of the printer. The bolt of our extruder kits is adjustable so that you can adjust the pressure of the extruder gear as needed..
  • EASY TO INSTALL: All you do is unbolt the old original Creality plastic extruder & screw in the new Metal Extruder and ready to start printing. This extruder DIY kit comes with an instruction on how to put it together, which makes it easier to install. Used for 1.75mm filament of 3D printer MK8 Bowden extruder frame..
  • STABLE: All-metal aluminum alloy, DIY aluminum block and you need to be assembled by yourself. Giving a much smoother travel and print quality. Fits a 1.75mm filament..
  • CUSTOMER SUPPORT - If you have any problems with our product, please feel free to contact us. We will respond within 24 hours and offer professional technical support to you..
Check Stock

Bowden Extruder Upgraded V3.0 Dual Drive Gear High-Performance Parts for CR10,Ender 3 Series,Anycubic Mega S, I3 Mega Chiron,Tevo Tornado, Wanhao D9, Anet A8 E10 and Prusa I3 DIY 3D Printer

  • Latest Dual Drive Extruder for Most 3D printers..
  • Update1: SIMAX3D Dual Gear Extruder V3.0 make an independent feeder inside to make filament wiring go inside and out super smoothly..
  • Update2: SIMAX3D Dual Drive Extruder V3.0 change the bowden buckle to pneumatic connector, you’re able to switch only this part after long time use instead of the whole extruder..
  • Update3: This Geared Extruder has an angle for Z-rod which is adapted to those 3D Printer who has an close Z axis installed like Ender 3 old version..
  • Package Include: User Manual*1. SIMAX3D Dual drive extruder set *1.
Check Stock

Winnwell AMP700 Junior Hockey Shoulder Pads with CleanSport NXT Odor Control Technology (Large)

  • Molded HD resin matrix spine and sternum protectors with PE inserts | MD foam back panels.
  • Low profile molded cap to protect shoulder joints.
  • Inside Liner - Hydrophobic mesh liner for moisture wicking and evaporation capabilities.
Check Stock

Spectape ST501 Double Sided Adhesive Tape, 36 yds Length x 1\ Width Paper

  • JVCC DC-WGT-01 Window Glazing Tape is a double-sided PE foam tape that is designed specifically for window glazing and is American Architectural Manufacturers Association (AAMA) certified..
  • Glazing tape is typically used during the installation process to prevent wind and water from entering by creating the inside seal between the insulated glass panel and the window sash/box. Other uses include mounting of emblems, nameplates, plastic strips and mirrors..
  • The foam used for JVCC DC-WGT-01 Window Glazing Tape is a high performance closed cell cross-linked polyethylene which is coated on both sides with a high-performance solvent-based acrylic adhesive. The adhesive system is formulated to bond with glass, wood, and aluminum substrates with quick stick, high peel adhesion, and very good strength. Glazing tape is a cleaner and more convenient option over glazing putty and other messy or more difficult to apply products..
  • JVCC DC-WGT-01 double-sided window glazing tape has outstanding resistance to weather needed for outdoor applications. It has a superior seal against dust and moisture due to its flexible, soft foam. The easy-peel poly liner allows for continuous and complete liner removal during window glazing applications (creating the seal between the i....
Check Stock