Top Pe Tube Extrusion Line

Cimeton 32Pcs Drip Irrigation Tubing Hole Punch & Fittings Kit, Including 2Pcs Drip Irrigation Pipe Hand Puncher 2-in-One Punch Tools with 30Pcs Drip Irrigation Barbed Plugs End Closure Plugs Fittings

  • ❀【Package Included】: Cimeton drip irrigation tubing punch and fittings kit includes 2pcs drip irrigation tube hand punch (1pc professional hole punch and 1pc 2-in-1 punch tool).
  • and 30pcs drip irrigation fittings: 20pcs straight barbed plugs and 10pcs figure 8 end closure plugs, 32pcs in total. This is a practical tool kit to meet your daily gardening and irrigation needs..
  • ❀【Long-Lasting】: Made of durable plastic, these punch tools and irrigation fittings are sturdy and safe, non-toxic, have well performance of water, UV and chemical resistance. And the hole punchers have been polished so it will not become dull, which ensure a longer service life..
  • ❀【Tube Hole Punchers】: Our irrigation tube punchers are designed to fit for drip tubing punch and 1/4" fitting insertion use, match with PE pipes with a diameter of 16/20/25mm. Punch hole size measures approx. 3mm. These tube hole punchers are mainly used to drill holes when installing drippers and micro sprinklers in PE pipe to ensure proper insertion of fittings, tubing and emitters for a tighter fit..
  • ❀【Irrigation Fittings】: Our straight barbed plugs are designed for quick connecting two side of 1/4" drip irrigation tubing or filling into a 1/2" drip irrigation pipe, and the....
Check Stock

UniTak3D Ender 3 Direct Drive Upgrade Kit Conversion Bracket Compatible with Creality Ender 3 V2,Ender 3 Pro and Voxelab Aquila 3D Printer Dual Gear Extruder&Bowden Extruder

  • 【Application】:The direct drive upgrade kit is suitable for Ender 3 V2,Ender 3 Pro,Ender 3,Voxelab Aquila 3D printers,NOT compatible with Ender 3 Max,Ender 3 Neo,Ender 3 V2 Neo,NOT compatible with TITAN extruder..
  • 【Outstanding Extrusion Control】:A direct drive extruder improves extrusion and retraction by removing the need for the Bowden (PTFE) tube. It provides precise retraction and a better print result..
  • 【Stable Operation】:The holes of the Split Type conversion bracket are perfectly aligned, with supports on both sides to keep the center of gravity in the middle, and the structure is more stable..
  • 【Flexible Filament Supported】: Compared with bowden extrusion,this direct drive extrusion greatly improves print quality of TPU and other flexible materials..
  • 【Easy Installation】:No X,Y or Z-axis build volume lost. No firmware or wiring modification.Just tear down the original Ender 3 series plate and mount this direct drive upgrade kit..
Check Stock

Wostore 50 Ft Copper Pipes 1/4 & 1/2 3/8 PE for Mini Split Air Conditioner Insulated Coil Line Set Made in USA HVAC Refrigerant with Nuts

  • 50 Ft. insulated high quality seamless copper tube showing no leaks, high and low pressure lines..
  • 1/4" & 1/2" O.D. for Mini Split Air Conditioners..
  • Insulation effect stick, Faster cooling, Flame-retarded, 3/8" PE thickness matches with most of the PVC cover in the market..
  • Excellent UV resistant: The insulated copper twin line set has been successfully tested by method ASTM G154..
  • Copper coil line set for ductless mini split air conditioner and heat pump systems..
Check Stock

BSEEN LED Dog Collar, USB Rechargeable, Glowing pet Dog Collar for Night Safety, Fashion Light up Collar for Small Medium Large Dogs (Royal Blue)

  • ONE SIZE FITS ALL: Collar measures 70 cm - But can be cutted to any length using scissors to fit your pet..
  • 3 LIGHT SETTING: Slow flash, quick flash and steady glow (Easy push button)..
  • RECHARGEABLE MINI USB: This item equipment with a rechargeable line..
  • EASY TO CONTROL: The LED flashing tube can be set to flashing or light continuously by means of touch switch..
  • DURABLE & TOUGH: The whole plastic tube part can be rub, extrusion in any shapes which won't affective the light of this collar.DescriptionFeature: This led dog collar is convenient to use. This item can be change for any shape because there is no circuit inside the plastic ring. Light would not be affected by bending or cutting, or dog bite..
  • Adjustable size:The total length of the collar is 27.5". The clear part can be cut from anywhere to adjust the size to your need..
  • Package includes: 1 x LED flashing dog collar 1 x USB cable.
  • Safety dog collar: In low light conditions,this dog collar can help keep your dog safe. AND It's easy to SEE your dog if the dog runs away..
Check Stock

Stihl 0000 930 4300 CF3 Pro Trimmer Line

  • The CF3 Pro Trimmer Line is formed using 3-component, tri-extrusion technology..
  • The CF3 Pro Trimmer Line is compatible with all STIHL nylon line trimmer heads, making the CF3 Pro at home on any landscape trailer or in any garage..
  • Its high-quality polyamide components ensure strong durability with excellent cutting performance..
Check Stock

SENRISE 100 X Transparent Shrink Wrap Film Bag Heat Seal Gift Packing for Homemade DIY Project Packaging Candle Jar Bath Bomb Gift 2235CM

  • EXTRUSION SYSTEM: Gradient mixing type with high-speed energy saving design, extrusion blow moulding machine gradually changed screw with same distance and different deep. Material of screw: High quality nitriding steel 38CrMoAlA,with nitriding surface HV≥800,brittleness≤2. Material of barrel: High quality nitriding steel 38CrMoAlA,with nitriding surface HV≥900,brittleness≤2..
  • DIE HEAD: Head mode of plastic toy extrustion blow molding machine, the continuous extrusion head is designed with material center coming-in type and removing the plastic melting line on the product surface, easily for material or color change, saving the time & material cost with speedy operation..
  • HYDRAULIC SYSTEM: The main hydraulic system of fully automatic precision plastic injection blow moulding machine is mainly composed of motor, pump, pressure regulating valve block, reversing valve blocks, cylinders and oil chillers. It controls platens open & close, carriage up & down, extrusion system up & down, blow pin actions, or even spinning cut and so on..
  • ELECTRICAL CONTROL: The electrical control system of plastic small bottles blowing machine is composed of operation panel, temperature control module, PLC, input & output module, proportion board, contactors, voltage s....
Check Stock

0000-930-2340 Trimmer Line .095" (280') Orange 1 Lb Roll

  • An extremely robust, long-lasting trimmer line designed for some of the toughest trimming applications..
  • This rugged line is formed using 3-component, tri-extrusion technology..
  • Its high-quality polyamide components ensure strong durability with excellent cutting performance.
Check Stock

BIQU H2 Extruder, V2.0 New Upgraded Dual Gear Extruder, Smooth Not Easy to Block 3D Printer Direct Extruder 1.75mm Filament for BIQU B1, Ender & CR Series Printers, CR-10S Pro

  • ...Gear: using bimetallic tube (copper alloy + GRADE5 titanium alloy), high temperature resistance, durability, high precision, and higher surface finish. The output gear modulus design was changed from 0.5 to 0.25, reducing the gear outer diameter, effectively solving the weak points of V1.0 gear jamming and unsmooth extrusion..
  • ✔️All-in-one Design & High Precision: The short-range extruder integrates the hot end of the nozzle, extruder, stepping motor, cooling fan, etc., double-gear extrusion, fast extrusion of consumables, short-range extrusion, short thread, and accuracy High, the control of the feeding amount is more accurate than remote extrusion, the withdrawal is more accurate, and the printing quality is better..
  • ✔️Extremely Smooth & Reducing Clogging: The smoothness of the throat and the inner wall of the nozzle reaches Ra0.4, which can effectively prevent clogging. H2 V2.0 adopts high-quality titanium-copper alloy hose, which has better heat dissipation and high temperature resistance, and the printing temperature can be as high as 400°C. It is the best quality hose material on the market. The hose is easy to disassemble, making it easier to use. convenient..
  • ✔️Lightweight & Compact & Powerful: BIQU H2 extruder weighs only 219 grams....
Check Stock

Creality 3D Printer CR-10S Pro V2 with BL Touch Auto-Level Touch Screen Large Build Volume 3D Printer 300mmx300mmx400mm 11.8x11.8x15.7 inch with Capricorn PTFE 95% Pre-Assembled Printer

  • BL TOUCH AUTO LEVELING: Matrix automatic bed leveling, quality BLTouch automatic leveling device. CR 10S Pro V2 can automatically measure the height....
  • 500W MEANWELL POWER SUPPLY: The CR-10S Pro V2 3d printer comes with a UL Certified Meanwell power supply. 500W large power and wide voltage power....
  • UPGRADED SILENT MAINBOARD:Creality 3D printer Cr 10s Pro v2 comes with a UL Certified Meanwell power supply. 500W large power and wide voltage power....
  • HIGH-QUALITY EXTRUSION MECHANISM: Upgraded gear extrusion structure has double high-density gears and big extrusion force for smooth feeding. Z-axis....
  • CAPRICORN BOWDEN TUBING: Imported Capricorn PTFE tube with high temperature resistant makes the feeding smoother and ensure great printing texture in....
Check Stock

XSPC Easy Cut & Bend Toolkit for XSPC PETG Tubing

  • Heavy Duty Hose Cutter – The heavy duty cutter can cut through PETG tubing as effortlessly as you would cut flexible PVC tubing. Easily cut PETG rigid tubing without the need for a saw..
  • PETG Easy Bending Tool – This tool allows you to easily bend PETG tubing at an angle between 0 and 180 degrees. Just heat the tubing with the bending rubber inserted, insert the tube into the tool and bend it to the required radius. This simple tool takes the guess work and difficulty out of bending rigid tube. (Suitable for 12-14mm outer diameter tubing).
  • Bending Rubber – Solid rubber extrusion for bending PETG tubing. Insert into the tube before bending, to stop the PETG tube kinking, or deforming. (Bending rubber diameter is 10mm).
  • PETG Chamfer Tool – Quickly chamfer the edges of PETG tubing by using this handy tool. Just insert the tubing and turn anticlockwise..
  • PETG Edging Sandpaper – Ideal for sanding the edges of PETG tubing, after using a chamfer tool..
Check Stock

Hicello Fuel Line Filter Tank Grommet Repower Kit for Echo SRM Grass Trimmer 13211546730 Grommet 90097

  • This is the Non original aftermarket part. Please check the size for compatibility before ordering it..
  • Grommet replaces # 13211546730 V13700003. fuel line grommet diameter:13/16". character: 3 Holes..
  • Fit for: Engine Drill ED-200 ED-2000 EDR-210 EDR-2100 EDR-2400. Shred-N-Vac ES-1000 ES-2000 ES-210 ES-2100 ES-211 ES-2400 ES-250 ES-252. Grass Trimmer....
  • Fit for: Hedge Clipper HC-1001 HC-150 HC-1500 HC-150i HC-151 HC-151i HC-152 HCA-2400 HCR-150 HCR-1500 HCR-151 SHC-1700 SHC-210 SHC-2100 SHC-211....
  • Fit for: Power Edger PE-200 PE-2000 PE-201 PE-225 PE-2400 PE-310 PE-3100 PE-311. Power Pruner PP-1200 PP-1250 PP-1260 PP-1400 PP-800 PPF-210 PPF-2100....
Check Stock

DIANN 10pcs RG6 Compression Connectors RG6 F Type Connector Coax Coaxial Compression Fitting

  • Connector Type: RF Adapter, Female Jack F- Type Connector.
  • Inner Diameter of the Wiring Tube: 8.7mm.
  • High Quality:RG6 Compression Connector Made of Nickel-Plated Brass, Which Has Good Electrical Properties, High Hardness and Not Easy to Break. The Nickel-Plated Layer Has Anti-Rust and Anti-Corrosion Effects. Long-Term Use Will Not Fall Off, Will Not Change Color.
  • Easy to Install:RG6 Compression Connector’s Quadruple Sealing System Prevents Moisture From Migrating Into the Connection. 360-Degree Radial Compression Provides Excellent Radio Frequency Performance and Integrity.
  • Applications: RG6 Compression Connector Wildey Used for Install a Satellite TV Dish / CCTV, Move Cable TV and Cable Modem, or Wire Up Cables for New House.
Check Stock