Top Pe100 Pipe Fittings

Spears 1429 Series PVC Tube Fitting Coupling Schedule 40 Gray 3/4 x 1/2 Barbed

  • Fitting connects to schedule 40 PE pipe on both ends.
  • PVC for strength and resistance to reactions with acids, gasoline, alcohol, and hydrocarbons.
  • Barbed fitting creates a tight seal on flexible pipe when used with a hose clamp (sold separately).
  • Meets ASTM D 2609 standards for plastic insert fittings and certified by NSF for use with potable water.
Check Stock

Gas Flex 1/2 Tubing Pipe KIT 33ft with 2 MALE Fittings Gasflex

  • FLEXIBLE ALUMINUM PIPE WITH INSIDE AND OUTSIDE PE COVER.
  • Comes with a 1/2" MALE NPT fittings on both ends.
  • Running gas lines to remote areas in the yard (BBQ -Jacuzzi - FIRE PIT).
  • ½" Nominal Pipe size: 12mm ID x 16mmOD (0.48" ID x 0.63" OD)..
Check Stock

SharkBite 1 Inch Ball Valve, Push to Connect Brass Fitting, Water Shut Off, PEX Pipe, Copper, CPVC, PE-RT, HDPE, 22223-0000LFA

  • INSTALLS IN SECONDS: Requires no special tools, no soldering, no crimping or glue.
  • COPPER, PEX, CPVC, PE-RT: Brass SharkBite Ball Valve plumbing fittings fit Copper, plastic PEX tubing, CPVC and PE-RT Pipe and connects them in any combination.
  • PERFORMANCE: SharkBite shutoff valves are are heavy duty and certified to sustain a pressure of 200 PSI and 200 degrees Fahrenheit.
  • QUALITY: Only SharkBite's quality and performance is field-proven.
  • PREFERRED BY THE PRO: All SharkBite fittings meet the same standards for commercial and residential plumbing applications.
Check Stock

3/4\ 6-Way Side Outlet Cross, Home TZH Cast Malleable Iron Pipe 6-Way Outlet Corner Fittings for Industrial vintage style DIY Project/Furniture/Shelving Decoration(10, 3/4\)

  • 1.Ultra-Durable Quality with 100% tested: When selecting furniture pipe fitting for your home, Home TZH pipe and fittings are the way to go. Our durable Black Iron fittings are 100% tested and protected right at the factory. Home TZH 6-way side outlet tee of high quality close bite and will not get loose after long time use. Our Pipe Fittings can prove functional & elegant throughout the years..
  • 2.Wide Application: Our pipe fittings come in 10 Packs for vintage furniture, DIY project and shelf hanging decoration applications in your home. 6-way outlet tee are perfect for DIY projects. Can be used to make pipe furniture, pipe clothing racks, pipe shelving, pipe table legs, industrial decor, etc. Constructed with extremely durable material, our 6-way outlet tee work great without sacrificing functionality..
  • 3.Without DIY Difficulty:The pipe fittings are threaded, just connect the threaded rods or pipes to the 6-way outlet tee, you can easily to build any shape of frame and shelf for a DIY furniture as you like. Don’t need any screws..
  • 4.Your Personal DIY Style: The simple and industrial design complements traditional and contemporary decor. Because of its industrial malleable iron material and rustic design, it will bring your house or store a Loft Retr....
Check Stock

3/4\ 4-Way Side Outlet Tee, Home TZH Malleable iron Pipe Fittings for Industrial vintage style, Flanges with Threaded Hole for DIY Project/Furniture/Shelving Decoration (10, 3/4\)

  • 1.Ultra-Durable Quality with 100% tested: When selecting furniture pipe fitting for your home, Home TZH pipe and fittings are the way to go. Our durable Black Iron fittings are 100% tested and protected right at the factory. Home TZH 4-way side outlet tee of high quality close bite and will not get loose after long time use. Our Pipe Fittings can prove functional & elegant throughout the years..
  • Wide Application: Our pipe fittings come in 10 Packs for vintage furniture, DIY project and shelf hanging decoration applications in your home. 4-way outlet tee are perfect for DIY projects. Can be used to make pipe furniture, pipe clothing racks, pipe shelving, pipe table legs, industrial decor, etc. Constructed with extremely durable material, our 4-way outlet tee work great without sacrificing functionality..
  • 3.Without DIY Difficulty:The pipe fittings are threaded, just connect the threaded rods or pipes to the 4-way outlet tee, you can easily to build any shape of frame and shelf for a DIY furniture as you like. Don’t need any screws..
  • Your Personal DIY Style: The simple and industrial design complements traditional and contemporary decor. Because of its industrial malleable iron material and rustic design, it will bring your house or store a Loft Retro In....
Check Stock

SharkBite 3/4 Inch Polybutylene Transition Coupling, Pack of 6, Push to Connect Brass Plumbing Fitting, PEX Pipe, Copper, CPVC, PE-RT, HDPE, U4016LF

  • SHARKBITE BRASS PUSH POLYBUTYLENE TRANSITION COUPLING: Polybutylene transition couplings are used to perfectly transition from a polybutylene pipe to another pipe.
  • remove using a disconnect clip or disconnect tongs.
  • COMPATIBILITY: Color-coordinated collars on the ends of the fittings identify which side goes with which pipe.
  • gray collar end works with polybutylene pipe.
  • tan collar end is compatible with PEX, CPVC, PE-RT, SDR-9 HDPE, and copper pipes.
  • EASY TO INSTALL: The SharkBite brass transition coupling features a push-to-connect mechanism for a watertight union, and allows for quick and easy installation, with no tools, crimping, glue, or soldering required.
  • PREFERRED BY THE PRO: SharkBite tools and fittings meet the same high standards for commercial and residential plumbing applications, combining durability and ease of use suitable for underground and behind-the-wall applications with no access panels.
  • SPECS: Made with DZR forged brass, this transition coupling can withstand 200 degrees F and 200 PSI.
Check Stock

SharkBite 3/4 x 3/4 Inch Ball Valve with FNPT Connector, Push to Connect Brass Plumbing Fitting, PEX Pipe, Copper, CPVC, PE-RT, HDPE, 22186-0000LF

  • INSTALLS IN SECONDS: Requires no special tools, no soldering, no crimping or glue.
  • COPPER, PEX, CPVC, PE-RT: Brass SharkBite Ball Valve plumbing fittings fit Copper, plastic PEX tubing, CPVC and PE-RT Pipe and connects them in any combination.
  • PERFORMANCE: SharkBite shutoff valves are are heavy duty and certified to sustain a pressure of 200 PSI and 200 degrees Fahrenheit.
  • QUALITY: Only SharkBite's quality and performance is field-proven.
  • PREFERRED BY THE PRO: All SharkBite fittings meet the same standards for commercial and residential plumbing applications.
Check Stock

TIRDITY 3/4\ Pipe Fittings - 24 Pack 3/4 Inch Black Floor Flange Elbow Tee Combo | Malleable Cast Iron Vintage Furniture Grade Threaded Pipes for DIY Industrial Shelves, Pipe Shelving, Steampunk Decor

  • 【 3/4" INCH ELBOW TEE COMBO PACK 】Our industrial pipe fittings 3/4 malleable iron threaded elbow/tee combo/pipe flange pack provides you the great floor flange pipe fittings at a reasonable price. Malleable cast iron pipe fittings can decorate your home or store more elegant and functional..
  • 【 PIPE INDUSTRIAL DECOR 】You can use these black malleable pipe fittings to install durable iron frame for your pipe furniture, pipe clothing racks, pipe shelving, pipe table legs, wall lamp or other industrial home decors. When you prefer an industrial, steampunk, vintage, retro, factory look, our decorative black pipe fittings are the way to go. Threaded pipe fittings are built to fit your household with an industrial, rustic style. Our black steel pipe fittings will definitely satisfy you..
  • 【 EASY TO INSTALL 】These metal cast pipe fittings are threaded, just screw the threaded rods or pipes to the tees and elbows and they will hold forever. No screws needed to install steampunk pipe fittings. Easy to install, no DIY difficulties to connect Pipe furniture fittings. You will love black iron pipe connectors..
  • 【 MATERIAL OF RAW IRON 】Since threaded metal pipes are unprocessed cast iron parts, we strongly recommend you to clean and seal each part of bl....
Check Stock

SharkBite 1/4 Inch to 1 Inch Depth Gauge and Pipe Deburring Tool, Copper, PEX, CPVC, PE-RT, HDPE, U702A

  • SHARKBITE BRASS PUSH DEPTH GAUGE AND DEBURRING TOOL: SharkBite depth gauge and pipe deburring tool is ideal for deburring the outside of a copper pipe to remove any sharp sections or burrs.
  • marks the proper insertion depth for SharkBite plumbing fittings.
  • COMPATIBILITY: Deburring tool is compatible with 1/4 to 1-inch-sized PEX, CPVC, PE-RT, SDR-9 HDPE, and copper pipes.
  • DURABLE: PVC deburring tool is composed of lightweight and durable plastic.
  • PREFERRED BY THE PRO: SharkBite tools and fittings meet the same high standards for commercial and residential plumbing applications, combining durability and ease of use.
  • MADE IN THE USA: All SharkBite valves, clips, joints, and adapters are manufactured and tested in the USA.
Check Stock

Hotop Push to Connect Fittings Air Line Pneumatic Fittings Kit 60 Pieces Quick Release Pneumatic Connectors Air Line Fittings 15 Splitters 15 Elbows 15 Tee 15 Straight Tubes (Blue,3/8 Inch Od)

  • What you get: the package comes with 15 pieces direct pneumatic parts (PU), 15 pieces V two-way parts (PV), 15 pieces T tee parts (PE) and 15 pieces Y tee parts (PY).
  • Different styles can suit different pneumatic piping needs.
  • Quality material: the chuck connecting the gas pipe is made of high-strength plastic material, which is not easy to fall off after connection.
  • The sealing element has good sealing performance and is not easy to leak.
  • The pneumatic parts have high strength, which are not easy to burst and ensure long service life.
  • Easy to use: you can just push the hose or tube into the fitting without worries because it is strong, and release the ring to make it easy to remove.
  • These push to connect fittings are easy and convenient for you to operate.
  • Different styles: there are 4 different types of pipe fittings, including tee, elbow, Y and straight, which can arbitrarily change direction after installation, and can be manually inserted and pulled out from the gas pipe without extra tools.
  • Wide application: all models of push lock fittings are suitable for air pipes, pneumatic tools and more, and can be applied to connect pipes and different pneumatic components.
Check Stock

Hotop Push to Connect Fittings Air Line Pneumatic Fittings Kit 60 Pieces Quick Release Pneumatic Connectors Air Line Fittings 15 Splitters 15 Elbows 15 Tee 15 Straight Tubes Black,1/4 Inch Od

  • What you get: the package comes with 15 pieces direct pneumatic parts (PU), 15 pieces V two-way parts (PV), 15 pieces T tee parts (PE) and 15 pieces Y tee parts (PY).
  • Different styles can suit different pneumatic piping needs.
  • Quality material: the chuck connecting the gas pipe is made of high-strength plastic material, which is not easy to fall off after connection.
  • The sealing element has good sealing performance and is not easy to leak.
  • The pneumatic parts have high strength, which are not easy to burst and ensure long service life.
  • Easy to use: you can just push the hose or tube into the fitting without worries because it is strong, and release the ring to make it easy to remove.
  • These push to connect fittings are easy and convenient for you to operate.
  • Different styles: there are 4 different types of pipe fittings, including tee, elbow, Y and straight, which can arbitrarily change direction after installation, and can be manually inserted and pulled out from the gas pipe without extra tools.
  • Wide application: all models of push lock fittings are suitable for air pipes, pneumatic tools and more, and can be applied to connect pipes and different pneumatic components.
Check Stock

Bulkhead Union Push to Connect Tube Fitting 3/8 In Tube OD Stainless Steel Double Threaded 5 Packs

  • Bulkhead Fitting Push Connector Type : 3/8 inch, Tube OD 3/8 inch NPT.
  • Bulkhead Fitting Type: Push In Straight Male Connector.
  • Body:Nickel Plated Brass Seal, O-Ring NBR.
  • Bulkhead Fitting Features: high pressure resistant and non tripping, all taper pipe threads are paint Teflon leakage-proof rubber, offering good seal property.
  • Push Fittings are easy to install, flexible and space-saving, 360-degree rotate freely, Release rings adopt ellipse design, which can be removed conveniently.
  • Fluid Admitted: Air, Vacuum, Water (No Freezing).
  • Negative Pressure-100Kpa | -29.5 In Hg. Working Temperature: 0-60¡ãC | 32¡«140¡ãF. Applicable Tube:PU / PA / PE / PVC.
Check Stock