Top Permanent Micro Dc Servo
[2-Pack] MG996R 55g Metal Gear Torque Digital Servo Motor for Futaba JR RC Helicopter Car Boat Robot
- The MG996R model compliant with most standard receiver connector,for Futaba, Hitec, Sanwa, GWS etc..
- This MG996R Servo motor which updated from SG90 and MG90S micro servo motor. (the Speed, Tension and Accuracy all increase).
- Power Supply: Through External Adapter. Stable and Shock Proof. Coreless Motor , Metal Gear ..
- Torque at 6V 12kg/cm, 7.2V 13kg/cm.(Recommended voltage: 5V, current usage: 3A ). Positioning speed at 4.8V without load 0.17s / 60 degrees.
- Universally Applicable: Micro Servo Motor for 1:10 RC car robot helicopter servo remote controlled aircraft and suitable for most DIY projects..
Check StockAdeept AD002 4 Pcs Compatible with MG90S 9G Micro Servo Motor, Metal Geared Micro Servo for RC Robot Car Helicopter Airplane Controls Boat Raspberry Pi Project
- 【High Quality】100% new, good quality, AD002 Micro servo motor, Compatible with MG90 servo motor..
- 【Full Metal Gear】 Metal gear with less noise,the metal gears help with the movement,these will rotate the proper direction..
- Operating Speed: 0.11 seconds/60 degrees(4.8V).The servo Maximum angle is 180..
- 【Wide Application】The great micro servo motors for helicopter/ boat / robot car / robot arm /remote controlled aircraft DIY. Fit for electronics DIY, compatible with Arduino, Raspberry Pi..
- 【Service Guarantee】If you encounter any problems during use, please contact us, we will provide solutions to ensure your experience. We will reply within 24 hours.This AD002 servo motor is compatible with all Adeept robots..
Check StockAdeept AD002 2 Pcs Compatible with MG90S 9G Micro Servo Motor, Metal Geared Micro Servo for RC Robot Car Helicopter Airplane Controls Boat Raspberry Pi Project
- 【High Quality】100% new, good quality, AD002 Micro servo motor, Compatible with MG90 servo motor..
- 【Full Metal Gear】 Metal gear with less noise,the metal gears help with the movement,these will rotate the proper direction..
- Operating Speed: 0.11 seconds/60 degrees(4.8V).The servo Maximum angle is 180..
- 【Wide Application】The great micro servo motors for helicopter/ boat / robot car / robot arm /remote controlled aircraft DIY. Fit for electronics DIY, compatible with Arduino, Raspberry Pi..
- 【Service Guarantee】If you encounter any problems during use, please contact us, we will provide solutions to ensure your experience. We will reply within 24 hours.This AD002 servo motor is compatible with all Adeept robots..
Check Stockdiymore 6Sets MG996R 55g Digital Metal Gear Servo Motor + MG995 MG996R Metal Servo Arm 25T Disc Metal Horns for Robot Arm RC Helicopter Airplane Car Boat Robot
- 【Package】Package included 6 sets MG996R metal gear servo motor+25T Disc metal horns..
- 【Updated version】MG996R Micro Servo motor, which updated from SG90 Micro Servo and MG90S micro servo motor. The speed of MG996r is faster, the accuracy is much improved and the tension is increased..
- 【Quality】180°rotation high torque,Stable and shock proof and also of high speed.Can compatible with most standard receiver connector: Futaba, Hitec, Sanwa, GWS, etc..
- 【Parameter】Torsional moment: 12kg/cm(6V), 13kg.cm.at(7.2V).
- Operating Speed : 0.17sec / 60 degrees (4.8V no load).
- Operating Speed : 0.13sec / 60 degrees (6.0V no load)..
- 【Application】Biped robot/manipulator/remote control car, suitable for 50-90 grade methanol fixed-wing~aircraft and 26cc-50cc gasoline fixed-wing aircraft and other models..
Check StockFOSA EMAX ES9051 4.3g Digital Micro Servo Plastic Gear 0.8kg Torque Servo RC Parts for 3D F3P RC Airplane, for FUT/JR Plug
- Micro servo motor is designed for 3D F3P airplane. Easy to install and disassemble.
- Digital micro servo is fast and precise to react, which can achieve the best control state when used with RC models.
- Mini gear servo is high efficiency, low noise and low power consumption during operation.
- Metal gear rc servo Gear is made of high-quality materials, very wear-resistant, light weight, can not be easily damaged.
- Plastic gear is shock resistant and durable, practical, stable performance.
Check Stock2 Pieces MG90S 9g Micro Servo RC Servos for Planes MG90S Digital Servo Aluminum Alloy SG90 Micro Servos Metal Gear for Smart Robot Car Helicopter Plane Boat Vehicle Models
- Package includes: the package 2 pieces of mini servo metal gears with model MG90S, which can replace SG90 for better noise suppression and durability.
- Detailed size: the servo motor 9g has a size of 22.8 x 12.2 x 28.5 mm/ 0.9 x 0.5 x 1.1 inch, a weight of 13.6g, an operating torque of 2.0KG/ cm, a....
- Wiring: dark gray: GND, red: VCC 4.8-7.2V, orange: pulse input, interface type: JR/FUTABA general.
- You can give this digital servo motor to your....
- Robust structure: the metal micro servo is composed of aluminum metal teeth, coreless motors, and double ball bearings, which is strong, reliable and....
- Wide application: the metal gear servo micro can be compatible with 450 E-sky, swashplate steering gear, fixed wing, helicopter KT, flapping wing,....
Check Stock4 Pack MG996R Metal Gear Torque Digital Servo with Arm Horn, MELIFE MG996 Robot Servo Motor for FUTABA Hitec Sanwa GWS JR RC Helicopter Car Boat Robot
- This MG996R Servo motor which updated from SG90 and MG90S micro servo motor. (the Speed, Tension and Accuracy all increase)..
- The MG996R model compliant with most standard receiver connector,for Futaba, Hitec, Sanwa, GWS etc..
- Power Supply: Through External Adapter. Stable and Shock Proof. Coreless Motor, Metal Gear..
- Torque at 6V 12kg/cm, 7.2V 13kg/cm.(Recommended voltage: 5V, current usage: 3A ). Positioning speed at 4.8V without load 0.17s / 60 degrees..
- Universally Applicable: Micro Servo Motor for 1:10 RC car robot helicopter servo remote controlled aircraft and suitable for most DIY projects..
Check Stock3pcs M0090 9G Metal Gear Mini Servos 1.9KG Torque RC Servo Analog Servo Motor Micro Servo for RC Model Car Robot Flight Controller Toy Product
- ✔️【High Speed Servo】Torque: 1.7kg-cm/4.8V.
- 0.08sec/60°/6.0V Mini Analog Servo M0090 13g/1.9kg-cm/0.08sec.
- ✔️【High performance】rc helicopter servo.Precision metal gears forms a strong and solid framework..
- ✔️【High-strength】M0090 RC Servo Suitable for use in planes, helis, cars and robots. Mini Analog Servo M0090 13g/1.9kg-cm/0.08sec. Interface Type: JR .
- ✔️【Metal Gear Servo Motor】Over-spec refined design out performs ordinary micro size servo.Weight:13g / 0.5oz (not include wires weight).
- Dimension:22.4*12.5*22.8mm³ / 0.9*0.5*0.9in³.
- ✔️【Good Quality Servo】Strict production and quality control of plastic components.High reliability,good stability,strong adaptability, Low noise,small vibration,smooth operation long life.
Check StockAEDIKO MG996R Servo Motor Control 180 Angle Metal Gear Servo Digital High Speed Torque Servo Motor for Smart Car Robot Boat RC Helicopter 2-Pack (MG996)
- Positioning Speed Without Load: 0.17s / 60 degrees 4.8V.
- Compliant with Futaba, Hitec, Sanwa, GWS, etc ..
- Latest Version: MG996R Servo Motor Which Updated from SG90 and MG90S Micro Servo Motor,Made of High Precision Potentiometer and High Resolution Digital Chip to Ensure Stable Performance and Solve Problems:Unsuitable R / C and Slow Response Time.
- Gear Type: All Metal Gear RC Servo Can Control the Angle Range from 0 to 180, with Precise Control and Gears are Consistent,Which Can Rotate 360 Degrees When Power Off.
- Application: Analog Servo Motor Great for RC Helicopters, Micro Robots,Robotic Arms and RC Rock Crawler, RC Boat Motor,Truck, Boat, Racing Car,Various Remote Control Toys and Arduino Experiments.
Check StockJuki MO-2000QVP Air Thread Serger
- 5 thread twin needle safety stitch overlock sewing machine..
- __Included Accessories: ---Instruction manual PDF format ---Needles ---Oil ---Tools.
- The price of the machine includes: __Table Top __Motor __Drawer __Lamp __That is 100% Complete.
- The MO 6700 overlock sewing machine incorporates various mechanisms as standard, such as a differential-feed micro-adjustment mechanism and an external adjustment mechanism for adjusting the feed dog inclination as well as increasing the differential feed ratio, which can be easily adjusted to finish seams that perfectly match the material to be used..
- It comes complete with sewing machine fully submerged table and Electronic DC Servo Motor 3/4 H.P, 1 PHASE, 110 VOLT, 0 ~3300 RPM ), everything (drawer, belt, tools and instruction manual) brand new, packed in sealed boxes and never been used before.Assembly required !.
Check StockFEETECH 35KG Servo Motors FT5330M High Torque RC Servo Full Metal Gear Digital Servo,Aluminium Case, Control Angle 180° for Scx24,1/8 1/10 RC Cars,TRAXXS x4, Baja, RC4WD, GTR and More
- BRAND SERVO-FEETECH 35KG digital rc servo, high sensitivity, stable and low-noise. High quality PA aluminum case, more sturdy. Hard iron shaft, provide higher stability..
- EXCELLENT SERVO PERFORMANCE-High precise upgrade metal gear, with better accuracy and longer service life.The output torque exceeds the overload torque, lasts 8S, or the temperature over 70 ℃, the steering gear will automatically stop the output torque. The overload torque can be modified..
- UPGRAD SERVO-Upgraded high torque rc servo, high rotation – well-controlled 180° (at 500→2500μsec) large steering angle, when the power is stopped, it can rotate 360 degrees. Dead width ≤ 4 μsec. Durable and reliable. React quickly and accurately. No stuck problem..
- MATCHING SERVO ACCESSORIES-This mini micro servo is equipped with metal mount and servo horn, replaces the original plastic accessories. No need to order accessories with more trouble..
- WIDE-APPLICATION-Perfect for Axial scx24, 1/8 and 1/10 scale RC robots, trucks, off-road vehicles, robotic arms, and any application that uses a standard servo system. The servo size is 55X20x43mm..
Check StockBrother 3534DT Overlock Machine 3/4 Thread Domestic Serger
- MO-6714 = 4 thread single needle overlock sewing machine..
- __Included Accessories: ---Instruction manual PDF format ---Needles ---Oil ---Tools.
- The price of the machine includes: __Table Top __Motor __Drawer __Lamp __That is 100% Complete.
- The MO 6700 overlock sewing machine incorporates various mechanisms as standard, such as a differential-feed micro-adjustment mechanism and an external adjustment mechanism for adjusting the feed dog inclination as well as increasing the differential feed ratio, which can be easily adjusted to finish seams that perfectly match the material to be used..
- It comes complete with sewing machine fully submerged table and Electronic DC Servo Motor 3/4 H.P, 1 PHASE, 110 VOLT, 0 ~3300 RPM ), everything (drawer, belt, tools and instruction manual) brand new, packed in sealed boxes and never been used before.Assembly required !.
Check Stock