Top Pex Elbow

GROHE 35115000 GrohSafe 3.0 Pressure Balance Valve Rough with Flush Plug with Elbows with PEX Crimp Outlets with Service Stops, Unfinished

  • PEX elbow connections for easy installation without adaptors, reducing leak points.
  • Valve can be easily rotated 180° to accommodate supply lines from floor or ceiling.
  • Flush plug allows valve body to be tested and flushed without the presence of the valve cartridge (ships with trim).
  • Can be tested using flush plug with air (200 psi) or water (300 psi).
  • Stainless steel retaining ring with flats secures flush plug and cartridge, eliminating the need for screws.
Check Stock

3/4 Inch Tee Fitting Compression Tee Fittings for 3/4 Inch Tubing System (2 pcs)

  • 【Lead Free Material】PPSU is a durable plastic poly material, lead free and non-toxic. So PPSU is more eco-friendly than brass. These pex expansion fittings meet the standard of potable water grade. When the water flows through the poly pex fittings, it will not be polluted..
  • 【Fully Equipped】Qty: 1/2 inch pex expansion elbows 10pcs + 1/2 inch pex expansion Tees 10pcs + 1/2 inch pex expansion couplings 10pcs + 1/2 inch pex expansion rings 70pcs | Connection pipe type: Pex A pipe only | Max temperature: 200F | Max operating pressure: 160psi.
  • 【Professional Standards】Pex Expansion A Fittings are of high quality. All poly pex a fittings are manufactured according to ASTM F-1960, CSA B137.5 and qualified cUPC certification. Listed to NSF NSF/ANSI 61..
  • 【Easy to Install】Use expansion tools and expansion rings to connect the expansion fittings to the PEX A pipe. The protruding stop part on the expansion pex fitting makes it clear whether it has been installed in place. NOTE: Expansion tool is not included in the package..
  • 【Wide Usage】Plastic poly pex expansion fittings can be widely used in heating circulation system and domestic water. Due to its good corrosion resistance and heat resistance, it can have excellent performance even in a chemica....
Check Stock

RIDGID 43858 3/4-Inch ASTM F 1807 Close Quarters Manual PEX Crimp Tool

  • 【HIGH QUALITY】This PEX Clamp Tool is made from durable high quality material steel with forging process to ensure integrated mechanical property and long service life. Pex clamps made from high quality 304 stainless steel..
  • 【UNIVERSAL】Meets ASTM 2098 standard. Compatible to work with all brand stainless steel clamps with sizes 3/8", 1/2", 5/8", 3/4" and 1"..
  • 【DURABLE】The stainless-steel clamp rings provided in this cinch clamp tool kit resist corrosion more effectively than other crimp rings, which can be a major benefit in direct-burial applications..
  • 【EASY TO USE】PEX Crimp Tool features a comfort grip which makes PEX installation easier. It is suitable for making copper crimp ring connections in potable water lines, radiant heat, snow melt, ice rink systems and among other applications..
  • 【PACKAGE INCLUDES】1pc x PEX Clamp Cinch Tool, 10pcs x 3/8" PEX Clamps, 15pcs x 1/2" PEX Clamps, 10pcs x 3/4" PEX Clamps, 5pcs x 1" PEX Clamps..
Check Stock

Universal Dishwasher Installation Kit - 10 FT Premium Stainless Steel Braided Dishwasher Hose kit,Food Grade PEX Inner Tube Dishwasher Water Supply Line with 3/8"x3/8"MIP Elbow,3/8"x 3/4" FHT Elbow

  • ...st brand and models dishwasher,such as BOSCH,Samsung, GE, LG, Whirlpool, Frigidaire, etc..
  • 【Easy Installation】:The dishwasher water line each end has brass 3/8" compression fittings and built-in high-quality sealing ring,ensure a securely and solid connection.
  • The elbows with standard thread,plumber's sealant tape is also included in the kit.
  • even DIY,your first installation or replacement work can be completed in minutes,and no leakage..
  • 【Safe material】:Our dishwasher hose inner tube made by food grade PEX materials, non-toxic ingredients,odorless and tasteless, have tested to meet NSF/ANSI standards.
  • the brass elbow is lead free.Ensure you enjoy the convenience and safety that dishwashers bring to you and your family's lives..
  • 【Prime quality 】:The water line outer layer is wrapped with superior grade 304 stainless steel braided wire,the brass elbows are single piece brass construction.
  • So all the parts are extremely safe and durable,there is no need to consider replacement for several years..
  • 【Include all parts you need】: Our dishwasher hookup kit incl....
Check Stock

TICONN 70PCS PEX Clinch Clamps Kit, 304 Stainless Steel PEX Clamp Rings for PEX Pipe Tubing Connection (70CPS Kit)

  • [PREMIUM QUALITY] – The PEX fittings Clamp are made of thick premium 304 stainless steel with smooth edge. The ring clamp will seal the pipe 360° tightly. The stainless PEX rings provide excellent corrosion and rust resistances when used in harsh conditions..
  • [SIZE RANGE AND QUANTITY] – The PEX kit contains 70 pcs PEX pipe clamps include 12 pcs 3/8'', 20 pcs 1/2'', 12 pcs 5/8'', 20 pcs 3/4'' and 6 pcs 1'' PEX rings..
  • [WIDE APPLICATIONS] – The PEX pipe clamp can be used to secure PEX tubing with PEX crimping tool for home plumbing, garden, hydronic heating and air conditioning system. This clamp set contains vary diameters that meet your needs for different applications..
  • [STAY ORGANIZED] – The PEX tool kit assortment come within a storage box, easy to store and carry. The size range is engraved on each PEX clamps which makes it easy to identify the right size of the tube clamp..
  • [TICONN BRAND QUALITY COMMITMENT] – We stand behind the quality of our products. If for any reason you are not satisfied with your purchase, please contact us. We provide 30-day money back and 12-month warranty. 100% Satisfaction Guarantee for risk-free shopping!.
Check Stock

IWISS Angle PEX Crimping Tools Combo Kits for 1/2\ & 3/4\ Pex Crimp Rings with Go/No-Go Gauge with PEX Pipe Cutter Suits for All US F1807 Standards Copper Rings

  • All-in-One PEX Piping Tool Kit: IWS-1234C PEX plumbing kit is designed to make copper crimp ring and copper sleeves connections in sizes 1/2-inch to 3/4-inch. The tool set includes PEX crimping tool(1), PEX cutter(1), 1/2’’ copper crimp ring(20), 3/4’’ copper crimp ring(10)..
  • Patented Copper Crimp Ring: Annealed copper crimp rings are used to secure PEX piping to F1807 Brass or PPSU fittings. Designed for longevity and durability..
  • PEX Crimping Tool: Dual cavity plumbing PEX crimping tool for PEX Copper Crimp Rings 1/2" & 3/4". Allows for a one-handed crimp. Angle head design is useful for working overhead and in tight areas as it easily fits between joists. .
  • PEX Cutter: Shear cutter tool ideal for cutting tubing for water applications. Its spring-loaded handle opens easily so you can make multiple cuts quickly and accurately. Cuts through PEX tubings like butter..
  • Compatibility: Ideal for connecting copper crimp rings made to ASTM F1807 standard (Sioux Chief, Watts, Nibco and other brands) with crimp style brass and poly PEX fittings manufactured to ASTM F1807/F877 or F2159 standards respectively (Everhot, Nibco, Watts, Apollo, etc.)..
Check Stock

100 PCS 3/4 Inch PEX Cinch Clamps, 304 Stainless Steel PEX Fitting Clamps Pinch Clamps Ring Crimp Rings for PEX Tubing Pipe Fitting Connections (Silver -3/4inch(100PCS))

  • ✔【HIGH QUALITY MATERIAL】Pex crimp ring meets ASTM F2098 requirements that adopts 304 Premium Stainless steel material, which features sturdy and durable. Has good corrosion resistance, heat resistance, low-temperature strength, and mechanical properties. PEX barb fitting is an easy to install, low cost solution to connect PEX tubing. Compatible with All PEX Brands Manufactured with American Certification..
  • ✔【360-DEGREE SEAL PROTECTION】These interlocking rings provide a fast and reliable connection of all PEX pipes fittings. Form a complete 360-Degree watertight seal. The 360-degree narrow stepless clamp concentrates seal compression, rest secure in any PEX pipe using the system..
  • ✔【SPECIAL DESIGN】Special design for all PEX pipe connection fittings, Interlock Rings with 360 Stepless Design. This stepless ear clamp conforms to the ASTM International F2098 standard for securing PEX tubing to insert fittings. Universal used in any brand of crimp PEX pipe fittings or tubing..
  • ✔【WIDE APPLICATION】Widely used in all plumbing systems, such as water heater, air condition system, pipeline system, hydronic heating system, electrical plumbing, etc. PEX barb fittings are compatible for potable water distribution and hydronic heating applicatio....
Check Stock

Expansion Plug, T-Handle, 3/4 in

  • ✔️【 Lead Free Non-Pollution PPSU polyphenylsulfone Material 】: Easily installed without flame, flux, or solder and requires no bonding agents, glue, or solvents. Poly Alloy pex end caps are suitable for domestic water or radiant heating system, also used retrofit construction and for hot or cold water distribution..
  • ✔️【 Extra Long Service Life 】: Resists corrosion and mineral buildup, rust, and freeze damage..
  • ✔️ 【 Applications 】: This Poly PEX A expansion plug stoppers can be used in plumbing jobs and connects PEX Pipe in water distribution and hydronic heating systems..
  • ✔️ 【 Easy Installation 】 : Poly PEX End Caps Plug Stoppers Work with Pro-Pex Ring connection methods with help of Expansion Tool. Compatible with all types and brands of PEX A Tubing.
  • ✔️【 Warning Before Making Purchase 】: Package of 25 only includes 3/4" inch Poly End Caps Plug Stoppers PEX A plumbing systems. NOTE: Expansion Tool & PEX Ring/Sleeve Not Included in package.. Also, both 3/4" inch diameter must be considered. Manufactured in accordance with ASTM F-1960,CSA B137.5 Listed under cUPC, NSF/ANSI 61, NSF/ANSI 372..
Check Stock

Litorange 2 PCS Lead Free Brass Construction 1/2' by 1/2-Inch Female Threaded PEX Pipe Barb FNPT Swivel Elbow Plumbing Connection Crimp Fittings

  • ★ Lead Free Compliant Brass. Easily installed without flame, flux, or solder and requires no bonding agents, glue, or solvents..
  • No Flames, Glue, Fluxes, or Solvents Needed. Approved to be used underground and behind walls without access panels.
  • etc. Certified for use in potable water applications..
  • ★ Resists corrosion and mineral buildup, rust, and freeze damage. Suitable for new or retrofit construction and for hot or cold water distribution..
  • ★ Package include: 2 PCS 1/2" PEX elbow fitting..
Check Stock

TICONN PEX Clinch Clamps Crimping Tool for 304 Stainless Steel PEX Clamp Rings, PEX Pipe Tubing Connection (Tool Kit)

  • [PROFESSIONAL PLUMBER TOOL] TICONN PEX plumbing tools have efficient ratcheting and self-releasing mechanism that guarantees a proper rock-solid cinch. The ergonomic, cushioned, non-slippery handles were designed to ensure strong grips in any condition. These handles have enough leverage to comfortably crimp clamps PEX pipe on any PEX Fittings. This tool is designed to accept ASTM 2098 compliant stainless steel clamps..
  • [SIMPLE & RELIABLE] Made with tight tolerance and comes pre-calibrated, offering a simple and ready-to-use PEX crimp tool for novice DIYer and professional plumbers. This universal tool does not require any additional adjustment for all Stainless Steel clamp sizes..
  • [PRECISE RATCHETING MECHANISM] PEX clamps are securely clamped by squeezing the handle through a complete ratcheting cycle until the handle releases automatically. The ratcheting function allows the PEX tool to achieve desired compression without hesitation..
  • [ALL-IN-ONE KIT] This package includes all the tools you need in one kit, 1 PEX clinch clamps crimper, 1 PEX pipe cutter, 1 portable storage bag and 48 pcs PEX pipe clamps, which contains 6 pcs 3/8'', 16 pcs 1/2'', 6 pcs 5/8'', 14 pcs 3/4'' and 6 pcs 1'' PEX rings..
  • [TICONN BRAND QUALITY COMMITMENT] We stand behind the qu....
Check Stock

FLKQC Wood Gluing Pipe Clamp Set, Heavy Duty Cast Iron Quick Release Pipe Clamps for Woodworking (1, 1/2\)

  • This Pex crimping tool meets the ASTM 2098 standard. Pex Crimping Set works with stainless steel clamps from any manufacturer to make PEX connections from 3/8" to 1"..
  • Our Pex crimp tool/Plumbing tools/Pex cutter/Hose clamp tool has perfect polishing provides no damage during crimping and avoids leaking..
  • It’s easy to switch cinch. And the ratchet design and self-release mechanism will make the cinch easy. The pex fittings pipe tool is factory-adjusted with no requirement for calibration tool..
  • This is a 5 in 1 pex pipe tool that can be used to crimp 3/8, 1/2, 5/8, 3/4 & 1" inch Stainless clamps. No Adjustment on the pex tool is needed to switch sizes..
  • Package Includes: 1pc - Red handle Cinch Crimp tool, 1pc - Red handle pipe cutter, 20pcs 1/2" and 10 pcs 3/4" Clamps set, 1pc Storage Bag..
Check Stock

SharkBite 24947 Plumbing Straight Stop, Metal 1/2' x 1/2'

  • PEX CLAMP TOOL: Time and cost savings in combination with SharkBite PEX Stainless Steel 3/8 inch, 1/2 inch, 5/8 inch, 3/4 inch, 1 inch Stainless Steel Clamp Rings.
  • FAST: No waiting for glue to dry or joints to cool.
  • USE: Works in conjunction with PEX Stainless Steel Clamp Rings, PEX Barb Fittings and PEX Pipe Tubing.
  • ASSURANCE: PEX Clamp Tool will not release until a secure connection is made removing the need to check each fitting with a go/no go gauge.
  • RESIDENTIAL and COMMERCIAL: All SharkBite products meet the same standards for commercial and residential plumbing applications.
Check Stock