Top Phase Step Driver

DGZZI 2Set 28BYJ-48 DC 5V Geared Stepper Motor + ULN2003 Driver Test Module Board for Arduino

  • A, B, C, D four-phase LED indicates the status of the stepper motor work..
  • Stepper motor with a standard interface, when used directly pluggable..
  • 5 line 4 phase can be used for ordinary..
  • ULN2003 chip driver, connect to the 2 phase, support the development board, With convenient use, direct docking..
  • Package includes: 2* 28BYJ-48 Stepper Motor + 2* Uln2003 Driver Board.
Check Stock

Kiro&Seeu 2PCS DC5V 28BYJ-48 Geared Stepper Motor with ULN2003 Drive Boards Blue for Arduino (5V)

  • Stepper motor driver board with ULN2003..
  • A, B, C, D four-phase LED indicates the status of the stepper motor work..
  • Stepper motor with a standard interface, when used directly pluggable..
Check Stock

LAFVIN 5 Sets 28BYJ-48 ULN2003 5V Stepper Motor + ULN2003 Driver Board for Arduino

  • Stepper motor with a standard interface..
  • A, B, C, D four-phase LED indicates the status of the stepper motor work..
  • Drive Module Board Size(in): 1.37*1.18*0.6.
  • 5 line 4 phase can be used for ordinary ULN2003 chip driver, connect to the 2 phase , support the development board，With convenient use, direct docking.
  • Package Content: 5 set 28BYJ-48 Stepper Motor + Uln2003 Driver Board +20pcs female to male Dupont cable (as a gift).
Check Stock

6 PCS 28BYJ-48 ULN2003 5V Stepper Motor + ULN2003 Driver Board for Arduino

  • ❃❃ The stepping motor is a kind of mechanical and electrical device that converts electrical pulses into angular displacement. Come with a standard interface, when used directly pluggable..
  • ❃❃ Drive Module Board Size(in): 1.37 * 1.18 * 0.6(in).
  • ❃❃ A, B, C, D four-phase LED indicates the status of the stepper motor work..
  • ❃❃ 5 line 4 phase can be used for ordinary ULN2003 chip driver, Connect to the 2 phase, Support the development board, With convenient use, direct docking..
  • ❃❃ Great packing in a box : 6 PCS ULN2003 Stepper Motor + Driver Board (with a little gift)..
Check Stock

Pre Phase Daily Driver Orange Mango Pre Workout with 325mg Caffeine, Vitamin B12, Beta Alanine | Preworkout for Energy, Weight & Strength Training, Endurance and Pump - Phase 1 Nutrition

  • INTENSE WORKOUTS – Supercharge your most grueling workouts with the all-new, high performance, Pre Phase pre-workout mix by Phase One Nutrition. Scientifically-crafted using the latest cutting-edge research on strength and performance ingredients, Pre Phase is the daily driver pre-workout designed to drive you through any training session, no matter how tough. Get ready to smash your goals, crush your workouts and get the results you deserve. Pre Phase is the new Ultimate daily driver!.
  • BOOST ENERGY – Powered by the most cutting-edge performance enhancing ingredients, Pre-Phase delivers a seriously big wave of energy, focus, and next level mood enhancement. It is designed to deliver incredible explosive energy, instant strength gains, laser-sharp focus, endless endurance, and powerful raging pumps. Keep it real and TURN UP THE PUMPS with Phase One Nutrition’s Pre Phase!.
  • RECOVERY AND REGENERATION – Catering to the strength of on-the-go professionals, athletes, GYM-Goers, and competitors alike, Pre-Phase Daily Pre Workout maximizes the body’s potential and provides sustainable energy without jitters or crash. It is formulated for clean energy to keep you go....
Check Stock

4 Axis Stepper Motor Nema 23 Dual Shaft 425oz-in 112mm+CW5045 Driver 4.5A 256 Microstep+5 Axis Breakut Board+400W 36V Power Supply CNC Controller Kit for CNC Router Engraver Milling Machine

  • ♞【Stepper Motor】4pcs 23HS2430B nema23 stepper motor.
  • ♞【Stepper Motor Driver】4pcs CW5045 driver, current: 1.3A-4.5A.
  • Driver microstep: 1 (1.8°), 1/2, 1/4, 1/8, 1/16, 1/32, 1/64, 1/128, 1/256, 1/5,....
  • ♞【Control Board】1pcs 5 Axis breakout boad with cables,this breakout board needs to be connected to the parallel port and USB port of the....
  • ♞【Power supply】1pcs 400W,36V/9.7A switching power supply.
  • ♞【Application】This cnc kit are widely used in engraving machine, printer, medical equipment, embroidery machine, stage lighting, textile....
Check Stock

FYSETC 3D Printer Parts Stepstick Mute TMC2209 V3.1 Stepper Motor Driver UART Mode with Heatsink for Reprap Ram1.4 MKS Gen/SKR V1.3 MKS GEN L Ramps 1.4/1.5/1.6 Control Motherboard-5Pcs

  • TMC2209 V3.1: ultra-silent motor driver, 2020 New Version, compatible to a number of legacy drivers as well as to the TMC2208, Support UART mode, compatible with popular motherboards such as FYSETC S6/F6, MKS SGENL, MKS GENL v2.0, MKS Robin E3D, SKRv1.3/1.4. Heat sink color is random: Blue or Black..
  • Upgrade Tips: add CLK pin, not connect in default, tie to GND via 0R.
  • SPREAD pin is floating. Reserve pull-up and pull-down resistors. Move TX from 3 to 5..
  • Advantage 1: StallGuard for sensorless homing. The integrated power MOSFETs handle motor currents up to 2A RMS with protection and diagnostic features for robust and reliable operation. A simple to use UART interface opens up tuning and control options. Store application tuning to OTP memory..
  • Advantage 2: Industries’ most advanced STEP/DIR stepper motor driver family upgrades designs to noiseless and most precise operation for cost-effective and highly competitive solutions..
  • Advantage 3: Step/Dir Drivers for Two-Phase Bipolar Stepper Motors up to 2.8A peak –StealthChop for Quiet Movement – UART Interface Option –Sensorless Stall Detection StallGuard4..
Check Stock

DC 5V-9V 12V 2 Phase 4 Wire Stepper Motor Linear Rail 90mm Stroke Lead Screw Linear Stage Actuator with Nut Slider Step Angle 18 Degree for DIY Laser Engraving Machine

  • 【All metal】 The linear screw adopts an all-metal structure, with fine workmanship, stable performance and high work efficiency, and is an essential part of linear motion..
  • 【Size】 Screw length: about 45mm/1.8inch, screw diameter: about 3mm/0.1inch, pitch: about 0.5mm/0.02in (moving in one step is 0.025mm, if smaller, you can use a subdivision driver)..
  • 【2-phase 4-wire stepper motor】 With a miniature 2-phase 4-wire stepping motor, the slider stroke is about 34 mm/1.3 inches, and the motor diameter is about 20 mm/0.8 inches. The driving voltage of the motor is 5-9V/200-600mA (the higher the voltage, the greater the force Larger, the greater the calorific value)..
  • 【Easy to use】 The micro stepping motor slide table can drive the accurate diagonal to move the metal slide up and down..
  • 【Application】 Stepper motor guide linear slide table can be used for DIY small slider/project/measurement equipment/laser printer, etc..
Check Stock

8PCS L298N Motor Drive Controller Board Dual H Bridge DC Robot Stepper Motor Compatible with Ardu-ino Electric Projects, Smart Car Robot

  • Dual-channel H-bridge driver working mode creates higher working efficiency,L298N as main chip, Can drive one 2-phase stepper motor, one 4-phase stepper motor or two DC motors..
  • The L298N driver module, using L298N chip can directly drive two 3-30V DC motor, and provides a 5V output interface, you can chip circuitry to 5V power supply, support 3.3VMCU control, you can easily control the DC motor speed and direction, you can also control the 2-phase stepper motor, smart car essential..
  • Terminal driver part of the supply area VMS: +5V ~ +35V.
  • Drive part of the peak current Io: 2A / Bridge.
  • Logical part of the terminal power supply range Vss :4.5-5 .5V.
  • Logical part of the operating current range: 0 ~ 36mA.
  • The control signal input voltage range: 4.5-5.5V low 0V high.
  • To avoid damage the voltage stabilizing chip, please use an external 5V logic supply when using more than 12V driving voltage.
  • High working power to 46v, large current can reach 3A MAX and continue current is 2A, power to 25w..
  • Use large-capacity filter capacitors and diode with freewheeling protection function, increasing reliability, large capacity filter capacitance,afterflow protection diode, more stable and reliable..
Check Stock

Moondrop S8 8BA IEM Bass HiFi in Ear Monitor Earphone

  • Redesigned 8 driver triple crossover architecture.
  • Proprietary customized midrange driver for “MOONDROP” style midrange tuning.
  • One typical “inconformity” for multi driver IEM is usually caused by phase inconsistency between drivers caused by underdeveloped crossover....
Check Stock

RioRand 400W 6-60V PWM DC Brushless Electric Motor Speed Controller with Hall

  • 1.Humanized design,the interface adopts binding posts,standard heat sink,integrated speed regulating potentiometer on the board,it can be used when the power is on,save time and effort..
  • 2.Full patch technology,stable performance,with forward and reverse, brake function.Electric Motor Speed Controller Brushless Controller with Hall..
  • 3.Wide voltage 6-60V high power 400W DC three-phase brushless with Hall controller..
  • 4.High-power 400W DC three-phase brushless with Hall controller, support PLC 0-5V analog control, support PWM control, amplitude 2.5-5V.
  • 5.There are three relatively thick phase wires on the motor, and there are also three phase wire interfaces on the driver board. They are marked with the characters of MA, MB, MC and other similar characters, and they are also connected respectively..
Check Stock

Czech Games Under Falling Skies

  • Choose a driver and a vehicle and use them for all chapters!.
  • 3 rounds composed of the wreckage phase and run phase!.
  • A solo player experience for ages 10 and up!.
Check Stock