Top Phase sequence Test Pen
Omron K8DS-PH1 Phase Monitoring Relay
- The base of the protector adopts a rail type with two screw holes, which can be directly installed separately or mounted on the HT35 rail..
- Use 5 indicators to indicate: normal, phase loss (voltage three-phase unbalance), reverse phase, overvoltage and undervoltage..
- Phase loss protection means that when the protected line is in the running state or non-operating state, any phase failure occurs, and the delay is 2S..
- Overvoltage protection means that the voltage of the protected line is higher than the set value, and the delay is 3~8S, and the recovery is 6~20VAC..
- Reverse phase protection, a protection measure to prevent L1, L2, L3 three-phase AC phase sequence from being connected incorrectly, delay 2S action..
Check StockATOPLEE 3 Phase Sequence Presence Rotation Tester Indicator Detector Meter with LED and Buzzer 60V~600V (3 Phase AC)
- 【Operating Frequency Range 】 20 Hz ~ 400 Hz.
- 【Length of test leads 】approx. 1 meter long (3.3 feet).
- 【Protection Level】2000 V (impulse voltage 4000 V).
- 【Limit Time for Continuous Use】60 minutes maximum at 60V AC 4 minutes maximum at 600V AC.Used to measure the opening phase condition and sequence through LED and Buzzer..
Check StockPhase Rotation Meter, SP8030 3 Phase Battery Free Phase Sequence Detector for Industry for Electrician
- Professional choice: check the phase sequence and indicate whether the phase is open..
- Large measuring range: the indicator can check three-phase AC voltage from 200V to 480V, with excellent performance..
- The results are clear at a glance: LED lights can display phase loss and support buzzer instructions..
- Safe and secure: equipped with a clip to facilitate contact with the terminal to ensure safety and reliability..
- Portable design: small and light, with a portable bag, easy to carry..
Check StockMoog Subsequent 37 Analog Synthesizer
- Designed by Dave Smith Six discrete analog voices 64-step sequencer Arpeggiator, phase shifter Deadly ring modulator.
- The OB-6 is a once-in-a-lifetime collaboration between two of the most influential synth designers in history — Dave Smith and Tom Oberheim.
- It’s an all-analog, 6-voice poly synth with voltage-controlled oscillators, a state-variable filter, and voltage-controlled amplifiers, inspired by Tom’s original SEM design — the bedrock of his legendary 4-voice and 8-voice synthesizers.
- Manufactured and sold by Dave Smith Instruments, the OB-6 features six discrete analog voices with two oscillators (plus sub oscillator) per voice, continuously variable waveshapes with triangle, sawtooth, and variable-width pulse waves, X-mod with 2 sources and 5 destination, a 64-step polyphonic step sequencer, dual digital effects that include faithful recreations of Tom’s acclaimed phase shifter and ring modulator, a full-featured arpeggiator, and a powerful, in-your-face, sonic signatur....
- This analog powerhouse is packed into a four-octave, semi-weighted keyboard with velocity....
Check StockMattel Phase 10 Card Game - 2 Pack
- Skip-bo is the ultimate sequencing card game from the makers of UNO.
- Players use skill and strategy to create sequential stacks of cards.
- A rummy-type card game with a challenging and exciting twist.
- Object of the game is to be the first player to complete 10 Phase sequences.
- Be the first player or team to score 500 points.
Check Stock3-Phase Voltage Monitoring Relay AC 220-440V Phase Sequence Protection Small Size Protection for Industry Applications
- Dynamic phase loss, static phase loss protection: refers to the phase failure of any phase when the protected device is in the running state or non-operating state. The indicator light is in the form of red light and priority.
- Wrong phase protection: A protection measure to prevent the phase sequence of L1, L2, L3 three-phase AC power supply from being connected incorrectly. Instant action. The indicator light is in the form of yellow light..
- Voltage Unbalance Protection: Refers to a voltage imbalance that will affect the safe operation of the device. When the voltage imbalance rate is higher than 8%. The form of the indicator light is: the lack of phase red light is on, and priority..
- Delay protection: When there is a fault, the monitor will delay after 1~2 seconds, and the relay will release..
- The protection function of the monitor is not affected by the current of the line or load, the inrush current, the unbalanced current and the nature of the load. Long-term work with full performance and full climate. Power consumption is no more than 2W..
Check StockVoltage Monitoring Relay Phase Sequence Protection TG30S Phase Sequence Relay 3-Phase Mini for Industry Applications
- Dynamic phase loss, static phase loss protection: refers to the phase failure of any phase when the protected device is in the running state or non-operating state. The indicator light is in the form of red light and priority.
- Wrong phase protection: A protection measure to prevent the phase sequence of L1, L2, L3 three-phase AC power supply from being connected incorrectly. Instant action. The indicator light is in the form of yellow light..
- Voltage Unbalance Protection: Refers to a voltage imbalance that will affect the safe operation of the device. When the voltage imbalance rate is higher than 8%. The form of the indicator light is: the lack of phase red light is on, and priority..
- Delay protection: When there is a fault, the monitor will delay after 1~2 seconds, and the relay will release..
- The protection function of the monitor is not affected by the current of the line or load, the inrush current, the unbalanced current and the nature of the load. Long-term work with full performance and full climate. Power consumption is no more than 2W..
Check StockSiemens 3UG4631-1AW30 Monitoring Relay, Single Phase Voltage Monitoring, Screw Terminal, 1 CO Contacts, 0.1-60VAC/DC Measuring Range, 0.1-30V Hysteresis, 0-20s Delay Time, 24-240VAC/DC Auxiliary Voltage
- 3 INDICATORS-The protector base adopts 35mm rail type or device type, and has two screw hole structures inside, which can be directly installed separately or HT35 rail. Indicated by three indicators: normal, phase loss(voltage three-phase unbalance), reverse phase.
- PHASE LOSS PROTECTION-Phase loss protection means that when the protected line is in the running state or non-operating state, any phase failure occurs, and the delay is 2S.
- REVERSE PHASE PROTECTION-Reverse phase protection, a protection measure to prevent L1, L2, L3 three-phase AC phase sequence from being connected incorrectly, delay 2S action.
- VOLTAGE IMBALANCE PROTECTION-Voltage imbalance protection, which refers to a protective measure that will affect the safe operation of the line due to three-phase voltage imbalance.
- IDEAL FOR-Widely used in air compressors, electric motors, distribution boxes, water pumps, oil pumps, central air conditioning units, etc.
Check StockVoltage Monitoring Relay Protection 3-Phase AC 220-440V Small Size Phase Sequence Protection Phase Sequence Relay for Industry Applications
- Dynamic phase loss, static phase loss protection: refers to the phase failure of any phase when the protected device is in the running state or non-operating state. The indicator light is in the form of red light and priority.
- Wrong phase protection: A protection measure to prevent the phase sequence of L1, L2, L3 three-phase AC power supply from being connected incorrectly. Instant action. The indicator light is in the form of yellow light..
- Voltage Unbalance Protection: Refers to a voltage imbalance that will affect the safe operation of the device. When the voltage imbalance rate is higher than 8%. The form of the indicator light is: the lack of phase red light is on, and priority..
- Delay protection: When there is a fault, the monitor will delay after 1~2 seconds, and the relay will release..
- The protection function of the monitor is not affected by the current of the line or load, the inrush current, the unbalanced current and the nature of the load. Long-term work with full performance and full climate. Power consumption is no more than 2W..
Check StockTG30S Mini AC 220-440V Voltage Monitoring Relay Phase Sequence Protection Protection 3-Phase Phase Sequence Relay for Industry Applications
- Dynamic phase loss, static phase loss protection: refers to the phase failure of any phase when the protected device is in the running state or non-operating state. The indicator light is in the form of red light and priority.
- Wrong phase protection: A protection measure to prevent the phase sequence of L1, L2, L3 three-phase AC power supply from being connected incorrectly. Instant action. The indicator light is in the form of yellow light..
- Voltage Unbalance Protection: Refers to a voltage imbalance that will affect the safe operation of the device. When the voltage imbalance rate is higher than 8%. The form of the indicator light is: the lack of phase red light is on, and priority..
- Delay protection: When there is a fault, the monitor will delay after 1~2 seconds, and the relay will release..
- The protection function of the monitor is not affected by the current of the line or load, the inrush current, the unbalanced current and the nature of the load. Long-term work with full performance and full climate. Power consumption is no more than 2W..
Check StockMini AC 220-440V TG30S Phase Sequence Protection Voltage Monitoring Relay Voltage Phase Protective Relay Building Electronics Projects for Industry Applications
- Dynamic phase loss, static phase loss protection: refers to the phase failure of any phase when the protected device is in the running state or non-operating state. The indicator light is in the form of red light and priority.
- Wrong phase protection: A protection measure to prevent the phase sequence of L1, L2, L3 three-phase AC power supply from being connected incorrectly. Instant action. The indicator light is in the form of yellow light..
- Voltage Unbalance Protection: Refers to a voltage imbalance that will affect the safe operation of the device. When the voltage imbalance rate is higher than 8%. The form of the indicator light is: the lack of phase red light is on, and priority..
- Delay protection: When there is a fault, the monitor will delay after 1~2 seconds, and the relay will release..
- The protection function of the monitor is not affected by the current of the line or load, the inrush current, the unbalanced current and the nature of the load. Long-term work with full performance and full climate. Power consumption is no more than 2W..
Check StockPennzoil Ultra Platinum Full Synthetic 5W-30 Motor Oil (5-Quart, Single Pack)
- Full synthetic 5W-30 engine oil made from natural gas, not crude, using Pennzoil’s patented gas-to-liquid PurePlus Technology.
- No other leading motor oil provides better wear protection for your engine (Based on Sequence IVA wear test using SAE 5W-30).
- Helps protect engines from loss of power and provides better fuel economy—drive on average an extra 550 miles per year (versus a dirty engine).
- Keeps pistons dramatically cleaner than required by the toughest industry standards (Based on ILSAC GF-6 and Sequence IIIH piston deposit test using SAE 5W-30).
- Delivers unsurpassed sludge protection to help keep high-performance and luxury car engines as close as possible to factory clean (Based on Sequence VH Sludge Test using SAE 5W-20).
Check Stock