Top Picatinny Scope Rings

Atom Optics 30mm Dovetail Scope Rings for 3/8\ or 11mm Dovetail Rails High Profile Scope Mounts 2PCS

  • 30mm scope rings 11mm Dovetail Rails 2pcs high profile，with allen wrench.
  • 3/8 Dovetail scope rings made of solid aluminum alloy with anodized black matte finish,precision machined.
  • Dovetail scope rings for 3/8" or 11 mm,the ring is for most scopes which are in 30mm scope tube.
  • 11mm Dovetail scope ring Base Designed with Locking Hex Screws to Tightly Fit on Mounts with 11mm Dovetail Dimension.
  • High profile scope rings (item height:2"),the height from the center of the scope tube to the picatinny base is 1.33 inches(34mm).
Check Stock

MIZUGIWA 1 inch Cantilever Flat Top Weaver Forward Reach Dual Ring Rifle Scope Mount

  • Front ring top and both side feature picatinny for mounting laser flashlight and compact red dot and so on accessories.- 1" Rings.
  • Heavy duty - Scope Mount Weight about 8.38oz.
  • Mount provides 2" of forward scope positioning on the .223 flat top platform.
  • Riser Mount for Rifles with Picatinny/Weaver Rail, Ring bases are milled as a single, tough unit, and rear ring tops feature Picatinny tops for....
Check Stock

Monstrum Picatinny/Weaver Rail Mount for Marlin 336/1894/1895 Series Lever Action Rifles | 0 MOA

  • Picatinny/Weaver rail mount built specifically for Marlin 336/1894/1895 Series lever action rifles.
  • Scope mount installs directly to receiver via the factory mounting holes and included set screws with no additional hardware required.
  • Allows for the mounting of Picatinny or Weaver standard scope rings, scope mounts, red dots, or other optics.
  • Available in two styles - a 0 MOA mount for zeroing your scope at short to mid range distances and a 20 MOA mount for zeroing your scope at long distances.
  • All Monstrum scope mounts and accessories come with a lifetime guarantee.
Check Stock

Burris 420180 Xtreme 1" Tactical Aluminum Scope Ring Set (Two Rings) for Picatinny-Style Mounts, Six Hole, Low 1/4 in. Height, Matte Black

  • SOLID AND DURABLE CONSTRUCTION: The ring set is made of strong yet lightweight aluminum in a black matte finish.
  • it was built to withstand any amount of recoil and multiple uses due to its strong performance.
  • FITS MOST WEAVER/PICATINNY-STYLE MOUNTS: Built with performance in mind, this set includes 2 pieces of low-profile rings that fit most Weaver and Picatinny-style mounts perfectly and hold your scope at a 1" height.
  • suitable for all 1-inch / 25.4mm scope tube.
  • VERSATILE RING SET: If you are searching for a tactical ring for your gun to mount your red-dot optics or magnifiers, opt for this 6-screw ring with a diameter of 1 inch.
  • this will hold any other 1" accessories that you might want to mount.
  • EASY TO INSTALL: Installing 1-inch scope rings is a relatively simple process that usually involves attaching the rings to the gun's receiver and tightening them with a screwdriver.
  • the rings provide a secure and stable platform for the gun, ensuring that it stays in place and does not shift during use.
  • LIGHTWEIGHT & COST-EFFECTIVE: 1" scope rings are relatively....
Check Stock

Monstrum Extended Series Offset Picatinny Scope Mount | 30 mm Diameter | 0 MOA | Black

  • Built specifically for long range scopes - 6-24x magnification scopes and above - with 3 inches of spacing between scope rings to accommodate scopes with longer dimensions and larger adjustment housing.
  • Lightweight one-piece scope mount for mounting standard 30 mm diameter tube rifle scopes - with weight comparable to a set of lightweight rings, while providing the added rigidity and convenience of a one piece mount.
  • Mounts to any flat top Picatinny rail equipped rifle with custom Picatinny locking bolts that slot seamlessly into your Picatnny rail with zero wiggle - guaranteed to hold zero against the toughest of recoil.
  • Available in three styles - a 0 MOA mount for zeroing your scope at short to mid range distances, a 20 MOA mount for zeroing your scope at longer distances, and a 30 MOA mount for serious long distance shooters..
  • Mount frame crafted from lightweight 6061 grade aluminum with hardened steel Torx mounting hardware to prevent stripping of the bolts.
Check Stock

Monstrum Extended Series Offset Picatinny Scope Mount | 30 mm Diameter | 20 MOA | Black

  • Built specifically for long range scopes – 6-24x magnification scopes and above – with 3 inches of spacing between scope rings to accommodate scopes with longer dimensions and larger adjustment housing.
  • Lightweight one-piece scope mount for mounting standard 30 mm diameter tube rifle scopes – with weight comparable to a set of lightweight rings, while providing the added rigidity and convenience of a one piece mount.
  • Mounts to any flat top Picatinny rail equipped rifle with custom Picatinny locking bolts that slot seamlessly into your Picatnny rail with zero wiggle – guaranteed to hold zero against the toughest of recoil.
  • Available in three styles – a 0 MOA mount for zeroing your scope at short to mid range distances, a 20 MOA mount for zeroing your scope at longer distances, and a 30 MOA mount for serious long distance shooters..
  • Mount frame crafted from lightweight 6061 grade aluminum with hardened steel Torx mounting hardware to prevent stripping of the bolts.
Check Stock

Monstrum Pro Series 7075 Aluminum Scope Rings | 30 mm | Medium Profile

  • Monstrum Pro Series scope rings are crafted from 7075 aerospace aluminum - providing greater tensile strength, shear strength, and Brinell hardness than typical 6061 aluminum scope rings.
  • Comes with stainless steel Torx mounting hardware, including a T25 Torx Plus wrench and a T25 Torx Plus Bit, for easy precision mounting without stripping of bolts.
  • Pro Series scope rings are treated with a Type III Hard Anodized Finish versus a Type II for previous generation scope rings for added protection against scratches and blemishing.
  • Available in 1 inch or 30 mm diameter. Compatible with both Picatinny or Weaver mounting bases..
  • All Monstrum products are now protected by Monstrum’s lifetime guarantee.
Check Stock

Monstrum Pro Series 7075 Aluminum Scope Rings | 1 inch | Medium Profile

  • Monstrum Pro Series scope rings are crafted from 7075 aerospace aluminum – providing greater tensile strength, shear strength, and Brinell hardness than typical 6061 aluminum scope rings.
  • Comes with stainless steel Torx mounting hardware, including a T25 Torx Plus wrench and a T25 Torx Plus Bit, for easy precision mounting without stripping of bolts.
  • Pro Series scope rings are treated with a Type III Hard Anodized Finish versus a Type II for previous generation scope rings for added protection against scratches and blemishing.
  • Available in 1 inch or 30 mm diameter. Compatible with both Picatinny or Weaver mounting bases..
  • All Monstrum products are now protected by Monstrum’s lifetime guarantee.
Check Stock

Sig Sauer WHISKEY3 4-12X50mm Scope, 1', SFP - Black + Picatinny Scope Rings (BDC-1 Quadplex Reticle)

  • ... reticle adjustment. Dependable waterproof (IPX-7 rated for complete immersion up to 1 meter) and fog-proof performance..
  • PRECISION Line up your shot at the exact height you want it with the Monstrum Tactical Precision Scope Rings! 1 inch in diameter, the rings are built for use with standard 1 inch scope tubes. The Picatinny base is compatible with all Picatinny mounting systems..
  • INCREASES STRENGTH It is not compatible with Weaver mounts. The torx locking screw system allows for quick yet powerful tightening while protecting the screws from stripping. These scope rings also features 2 square-integral recoil stops on each ring, which allows us to shave down the weight, while increasing the strength..
  • NO COMPROMISING Now you do not have to compromise when it comes to choosing either versatility or precision. The Monstrum Precision Rings allow you to properly align your scope to your rifle so you have one less thing to worry about..
Check Stock

Low Profile Scope Rings 1 inch – Rifle Scope Rings Scope Mounting Rings 1 Inch for Picatinny and Weaver Rails(2 Pieces)

  • The double tactical low profile scope mount fit for 1 inch / 25.4mm scope tube on the picatinny/weaver rails..
  • The height from the center of the riflescope tube to the picatinny base is 0.74 inches (18.7 mm)..
  • With mountings screws on the base and four screws on each side of the two scope rings. It will hold the riflescope mount securely..
  • Precision machined from aluminum alloy with anodized black matte finish. Light weight, only 2.46oz/70g..
  • Easy to install. Note: the rings have a star nut for installation rather than a hex nut and the tool is included..
Check Stock

Monstrum Picatinny Rail Mount for Savage Axis/Edge Rifles | 0 MOA | Old Version Pre 9/2021 Models

  • Please note that as of 9/2021, Savage Arms has altered the drill hole pattern on newly manufactured Savage Axis rifles. Check the serial number on....
  • Picatinny rail mount built specifically for Savage Axis/Axis II/Edge rifle platforms.
  • Allows for the mounting of Picatinny or Weaver standard scope rings, scope mounts, red dots, or other optics.
  • Available in two styles - a 0 MOA mount for zeroing your scope at short to mid range distances and a 20 MOA mount for zeroing your scope at long....
  • All Monstrum scope mounts and accessories come with a lifetime guarantee.
Check Stock

Athlon Optics Precision 34mm MSR Ring, Black (701007)

  • Double 1'' scope ring mount for Picatinny/ Weaver Rail (21mm)..
  • Design in hollowed-out configuration between the ring and the bottom of the base, to release heavy duty when clamping your scope..
  • Built-in tape inside per rings to prevent from marring the scope, also prevent sliding and holding postion accurately..
  • The ring is for most scopes which are in 1''/ 25.4mm scope tube. High profile, 0.98'' gap from base of mount to bottom of rings. ( Item height: 2.1'').
  • With only 1 rail clamp screw and 1 scope clamp screw per side, just twist off the nut and mount the base on the 20mm rail easily..
Check Stock