Top Piece Steels

Whole Earth Supply Clip Point D2 D-2 Steel Knife Blank +Brass Finger Guard for Custom Making Knives Blade Blades Blanks Hunting

  • 8.125 inches Approximate Overall Length, 4.5 inches Approximate Blade Length, 2.75 inches Approximate Handle Length, 1.13 inches Widest Part of Blank, 0.5 inches Widest Part of Handle, 4mm (1/8 inch) Thick Approximately.
  • Quality D-2 steel, one-piece construction..
  • Solid brass guard. Brass guard will require additional buffing and/or polishing. Brass bolster is fitted to the tang. Brass pins are not required to attach the guard. Your handle will hold the brass guard in place..
  • D-2 is a high-carbon tool steel, capable of holding a sharp edge for a long period of time. It is also much more resistant to corrosion than 1095. D-2 is called "semi-stainless", because it offers more stainless properties than high carbon steels, but it is also much tougher than premium stainless steels. D-2 has high wear-resistance and abrasion-resistance properties..
  • Blade comes sharpened. A final edge may be applied for an even sharper razor edge..
Check Stock

SPEED TIGER ICSM Chamfer End Mill - CNC Carving Bits, V Groove, 60 Degree, 1/4\Shank 2\OVL for Wood/Alloy Steels/Hardened Steels-Made in Taiwan(1 Piece, 60 Degree)

  • GENERAL APPLICATION CUTTER - Speed Tiger carbide tools excel at working wood, aluminum, copper, MDF, carbon steels (~HB225), alloy steels (HB225~325), pre-hardened steels (up to HRC45), hardened Steels (HRC40~45), cast iron.
  • Ideal for Chamfering, Carving V Groove, Centering.
Check Stock

Forged Warren Hoe with Long Fiberglass Handle

  • Ergonomic Love Shape Head for more Efficient Cultivation.
  • Weather Resistant and Non-corrosive Fiberglass Handle.
  • Versatile in Usages-For Planting, Cultivating, Furrowing etc.
Check Stock

Forney 30810 Welding Rod, 1/8-Inch

  • All position welding, low hydrogen rod for general purpose AC applications requiring low penetration, can also be used on DC+.
  • Designed for welding head enable steels and projects involving hard to weld steels including thick sections and restrained joints with cracking issues.
  • Not recommended for use with low open circuit-Voltage OCV power sources.
  • Excellent for tack welds and out of position welding.
  • Ideal for general fabrication of cold roll steels.
Check Stock

AUTOTOOLHOME 3/16' Carbide Square End Mill for Micro Grain Carbide Milling Cutter for Alloy Steel Hardened Steels 4 Flutes HRC50 (1, 3/16 in)

  • AUTOTOOLHOME 600 Nano carbide end mill tools excel at working carbon steels (~HB225), alloy steels (HB225~325), pre-hardened steels (up to HRC45), hardened Steels (HRC40~45), cast iron.
  • HIGH PERFORMANCE FOR HARD MATERIALS - Cutter is made of Micro Grain Carbide that is very tough, resists wear and offers high cutting performance.
  • Carbide milling bits Diameter: 3/16'', Shank Diameter: 3/16'', Flute length: 5/8'', Overall Length: 2", 4 Flutes.
  • This 3/16 inch square drill bit,highly optimized carbide material and coating pairing means superior wear and chipping resistance in your cutting applications.
  • End Mill router bits are used for side milling, end milling, finish machining, etc..
Check Stock

Whole Earth Supply Drop Point D2 D-2 Steel Partial/Hidden Tang Knife Blank +Brass Finger Guard for Custom Making Knives Blade Blades Blanks Hunting

  • 6.6 inches Approximate Overall Length, 3.5 inches Approximate Blade Length, 2.2 inches Approximate Handle Length, 1.3 inches Widest Part of Blank, 0.5 inches Widest Part of Handle (hidden tang style), 4mm (1/8 inch) Thick Approximately.
  • Quality D-2 steel, one-piece construction..
  • Solid brass guard. Brass guard will require additional buffing and/or polishing. Brass bolster is fitted to the tang. Brass pins are not required to attach the guard. Your handle will hold the brass guard in place..
  • D-2 is a high-carbon tool steel, capable of holding a sharp edge for a long period of time. It is also much more resistant to corrosion than 1095. D-2 is called "semi-stainless", because it offers more stainless properties than high carbon steels, but it is also much tougher than premium stainless steels. D-2 has high wear-resistance and abrasion-resistance properties..
  • Blade comes sharpened. A final edge may be applied for an even sharper razor edge..
Check Stock

AUTOTOOLHOME 3/8' Carbide Square End Mill for Micro Grain Carbide Milling Cutter for Alloy Steel Hardened Steels 4 Flutes HRC50 (1, 3/8 in)

  • AUTOTOOLHOME 600 Nano carbide end mill tools excel at working carbon steels (~HB225), alloy steels (HB225~325), pre-hardened steels (up to HRC45), hardened Steels (HRC40~45), cast iron.
  • Carbide milling bits Diameter: 3/8'', Shank Diameter: 3/8'', Flute length: 1'', Overall Length: 2-1/2", 4 Flutes.
  • This 1/4 inch square drill bit,highly optimized carbide material and coating pairing means superior wear and chipping resistance in your cutting applications.
  • End Mill spiral router bits are used for side milling, end milling, finish machining, etc..
  • Unequal flute spacing and irregular helix flutes ensures stable machining of difficult-to-cut materials and higher efficiency,Vibration absorption provides stability, high efficiency finishing and improved chip disposal.
Check Stock

5PCS 1/2' Carbide Square End Mill Bits Set, Milling Bits Cutter 1/2 Carbide End Mills for Alloy Steels/Hardened Steels, HRC 45 Deg Single End 4 Flute AlTiN Coating

  • Package Included: 5pcs 1/2" carbide square end Mill.
  • Material: Made of micro grain carbide. Carbide has higher hardness and wear resistance and excellent cutting performance than high-speed steel..
  • Coating: AlTiN, high aluminum content provides excellent hot hardness and oxidation resistance..
  • HRC 45 deg :carbide end mill tools excel at working carbon steels (~ HB225), alloy steels (HB225 ~ 325), pre-hardened steels (up to HRC45), hardened Steels (HRC40 ~ 45), cast iron..
  • Flutes:4 Flutes,high rigidity ,widely used in shallow slot,profile milling,and finish machining..
Check Stock

Forney 30701 E7018 Welding Rod, 3/32-Inch, 1-Pound

  • All position welding, low hydrogen rod for general purpose AC applications requiring low penetration, can also be used on DC+.
  • Designed for welding head enable steels and projects involving hard to weld steels including thick sections and restrained joints with cracking issues.
  • Not recommended for use with low open circuit-Voltage OCV power sources.
  • Excellent for tack welds and out of position welding.
  • Ideal for general fabrication of cold roll steels.
Check Stock

SPEED TIGER ISE Carbide Square End Mill - Micro Grain Carbide End Mill for Alloy Steels/Hardened Steels - 4 Flute - ISE1/4\4T - Made in Taiwan (5 Pieces, 1/4\)

  • GENERAL APPLICATION CUTTER - Speed Tiger 600 Nano carbide tools excel at working carbon steels, alloy steels, pre-hardened steels, hardened Steels, cast iron.
  • HIGH PERFORMANCE FOR HARD MATERIALS - Cutter is made of Micro Grain Carbide that is very tough, resists wear and offers high cutting performance.
  • AlTiBN COATING - Titanium aluminum boron nitride (AlTiBN) coating lubricates the end mill for stability at high temperature and superior wear resistance at high cutting speeds, offering better heat resistance than TiAlN, TiN or TiCN coatings.
  • HIGH-QUALITY - Flutes ground by a world-class ISO-9001 Factory.
  • Great performance at a competitive price.
Check Stock

SPEED TIGER ISE Carbide Square End Mill - Micro Grain Carbide End Mill for Alloy Steels/Hardened Steels - 4 Flute - ISE3/8\4T - Made in Taiwan (1 Piece, 3/8\)

  • GENERAL APPLICATION CUTTER - Speed Tiger 600 Nano carbide tools excel at working carbon steels (~HB225), alloy steels (HB225~325), pre-hardened steels (up to HRC45), hardened Steels (HRC40~45), cast iron.
  • HIGH PERFORMANCE FOR HARD MATERIALS - Cutter is made of Micro Grain Carbide that is very tough, resists wear and offers high cutting performance.
  • AlTiBN COATING - Titanium aluminum boron nitride (AlTiBN) coating lubricates the end mill for stability at high temperature and superior wear resistance at high cutting speeds, offering better heat resistance than TiAlN, TiN or TiCN coatings.
  • HIGH-QUALITY - Flutes ground by a world-class ISO-9001 Factory.
  • Great performance at a competitive price.
Check Stock

SPEED TIGER ISE Carbide Square End Mill - Micro Grain Carbide End Mill for Alloy Steels/Hardened Steels - 4 Flute - ISE1/8'4T - Made in Taiwan (5 Pieces, 1/8')

  • GENERAL APPLICATION CUTTER - Speed Tiger 600 Nano carbide tools excel at working carbon steels (~HB225), alloy steels (HB225~325), pre-hardened steels (up to HRC45), hardened Steels (HRC40~45), cast iron.
  • HIGH PERFORMANCE FOR HARD MATERIALS - Cutter is made of Micro Grain Carbide that is very tough, resists wear and offers high cutting performance.
  • AlTiBN COATING - Titanium aluminum boron nitride (AlTiBN) coating lubricates the end mill for stability at high temperature and superior wear resistance at high cutting speeds, offering better heat resistance than TiAlN, TiN or TiCN coatings.
  • HIGH-QUALITY - Flutes ground by a world-class ISO-9001 Factory.
  • Great performance at a competitive price.
Check Stock