Top Piezo Transducer

Self-adhesive Pickups Piezo Transducer, 3 in 1 Microphone Contact & Endpin Jack 1/4' for Electronic Acoustic Guitar Violin Ukulele

  • 3 Transducer Pickup System fit for most string music instruments, amplify an upright bass, banjo, violin, ukulele, viola, cello, mandolin, and a resonator guitar.
  • The plastic squares is a self adhesive block to mount the extra wire in your box, without pre amp they will work well..
  • No Battery and Soldering Required, pre-wired piezo mic save time for you, easy to install, convenient to use.
  • Cable Length: approx. 57cm/ 22.44", 3-pack Piezoelectric Disk Dia.: approx. 27mm/ 1.06", Endpin Jack Dia.: approx. 6mm / 0.24".
  • Material: Plastic, Electronic Part: Metal, Color: black lines, silver tone (Any other problem about product or replacement, please help to contact us, The way to Contact Seller: Find your order -- Contact Seller, then email to us, thanks.).
Check Stock

Randon 2pcs Acoustic Guitar Pickup Piezo Contact Pickup for Guitar Ukulele Violin, Mandolin, Banjo, Kalimba, Harp

  • Good Sound- The Acoustic Guitar Pickup comes with double sided tape and self adhesive Velcro,it is able to eliminate interfering external sounds and not be influenced by sound reflections from nearby objects, bring you the clear sound quality..
  • Stick Patch Design – With the stick patch transducer works by contacting with the sound source directly. it is very easy to install and you can stick it onto the instrument to minimize the damage to instrument body..
  • Nice Audio Jack – Randon Piezo Contact Pickup, 9.65” cable length, Jack female socket, suitable for universal cable with 6.35cm jack male plug.The audio jack can replace the end pin and install the strap..
  • Wide Application – The guitar pickup fits for many kinds of acoustic instruments, such as Guitar, Ukulele, Violin, Mandolin, Banjo, Kalimba, Harp etc..
  • Promise – 365 days expiration, 7 days unconditional return promise. If you have any questions or demanding advice on musical instruments, please feel free to contact us..
Check Stock

DAOKI 5PACK piezoelectric Ceramic Vibration Sensor piezo 3.3V/5V Module Analog Controller Electronic Components Supplies Sensor for Arduino with Dupont Cable

  • When the piezoelectric ceramic shocking will generate an electrical signal, controller analog port can be perceived slight vibration signals, also can be realized with vibration interactions related works, such as electronic drums..
  • Working Voltage: 3.3V or 5V. Working Current: 1mA..
  • Please connect analog voltage ceramic vibration sensor to the UNO controller's analog port A0 in accordance with the procedure, then observe the output value of serial port when the vibration degree is different, it can realize interactive works related to the vibration..
  • This Ceramic Piezo Vibration Piece Sensor buffers a piezoelectric transducer that responds to strain changes by generating a measurable output voltage change which is proportional with the strength of vibration. So you can know the extent of vibration. Different from digital vibration sensor that only accounts times, this analog one can tell extent of vibration..
Check Stock

D'Addario Guitar Tuner - Micro Headstock Tuner - Tuner for Acoustic Guitar, Electric Guitar, Bass Guitar, Mandolin, Banjo, Ukelele - Compact & Discrete - Clip On - 1 Pack

  • ... lightweight, discrete, compact tuner hides behind the headstock practically blending into the instrument and is small enough to be kept on your instrument while stored in its case. At 1.25", you will want one for each stringed instrument you own..
  • EXTREME ACCURACY - The NS Micro features an extremely accurate piezo transducer that picks up an instrument's vibration rather than sound. A wide calibration range (410-480Hz) guarantees precise performance and a visual metronome mode (20-270bpm) adds an additional practice tool..
  • EASY TO READ - The easy-to-read, tri-color backlit screen displays the note in red when out of tune, yellow when close, and green when in tune. Powered by a readily available (and included) CR2032 battery, you will enjoy maximum battery life thanks to the tuner's auto-off function..
  • VERSATILE - Featuring a 360-degree swivel mechanism and adjustable padded clamp, the NS Mini offers optimal viewing angles and maximum positioning flexibility. For left or right-handed instruments with small or large headstocks, it is the ideal choice for acoustic and electric guitars, basses, mandolins, banjos and ukuleles..
  • D'ADDARIO ACCESSORIES - For over 20 years, D'Addario Accessories (formerly Planet Waves) has been leading the industry in innovativ....
Check Stock

MakerHawk 4pcs Analog Ceramic Piezo Vibration Sensor Module 3.3V/5V for Arduino DIY Kit

  • This Ceramic Piezo Vibration Piece Sensor buffers a piezoelectric transducer that responds to strain changes by generating a measurable output voltage change which is proportional with the strength of vibration. So you can know the extent of vibration. Different from digital vibration sensor that only accounts times, this analog one can tell extent of vibration..
  • When the piezoelectric ceramic shocking will generate an electrical signal, controller analog port can be perceived slight vibration signals, also can be realized with vibration interactions related works, such as electronic drums..
  • Working Voltage: 3.3V or 5V. Working Current: 1mA. Interface Type: Analog Output..
  • Please connect analog voltage ceramic vibration sensor to the UNO controller's analog port A0 in accordance with the procedure, then observe the output value of serial port when the vibration degree is different, it can realize interactive works related to the vibration..
  • Strong After-sales Service Team: As long as you have any questions about the product, we will resolve your issue immediately if received your email, your satisfactory purchase experience is our greatest hope! How to email us? Plz click “MakerHawk-US” and click “Ask a question” to email us! Looking forward to y....
Check Stock

LUCKY Fish Finder Transducer Mount Arm Kayak Bracket Transducer Mounting Arm Flexible for Boat Canoe Kayak Fishing

  • ◆ Designed for Kayak & SUP Fishing : The transducer mount arm is an easy way to mount fish finder transducers as well as other kayak accessories. It is the best way to protect your transducer from scratching or cracking when your boat is going through bottom complex terrain of waters. The transducer mount arm helps to adjust the sank depth of wired transducer compared to mounting the transducer to the boat hull..
  • ◆ 360° Flexible Arm : The extended length of the transducer mounting arm is 21inch. Since the arm is bendable, you could adjust the angle of the transducer mounting arm to your most favorable position. Although it is a flexible arm, it couldn’t be either easily bended by the slight force. It is a solid and hard metal stick covered by the rubber..
  • ◆ Easy Install & Remove : The design of transducer mount base cup is adaptable for various kayaks and small boats. You could fix it by its unique suction cup on any smooth surface. So you can switch the transducer mount arm to different kayaks as you like. Meanwhile, you could also fix the transducer mount arm by three screws if there are screw holes in your kayak. You could also use double sided s....
Check Stock

Boat Zone BLACK0101 Transducer Spray Shield

  • Boat Zone’s Transducer Spray Shields virtually eliminate pesky transducer spray from your boat’s transom!.
  • Durable marine-grade plastic construction.
  • Three channels for transducer cable routing help provide a professional-looking installation.
  • Fits any 3. 5” x 12” transducer board (transducer board required for installation - not included).
Check Stock

Humminbird 411390-1 MEGA 360 Imaging Universal Fish Finder Transducer

  • Every detail, in every direction, now for every boat.
  • Use MEGA 360 Imaging without sacrificing boat control. Whether trolling or using Spot-Lock, MEGA 360 Imaging is independently mounted, so your sonar picture remains unchanged as the trolling motor turns.
  • Pick from two operation modes for this transducer.
  • MEGA 360 Imaging or Side Imaging. This allows you to view a MEGA 360 Imaging view or use this transducer as a MEGA Side Imaging sonar source by selecting the Side Imaging operation mode.
  • Mark waypoints directly on your MEGA 360 Imaging screen and watch them update as your boat position changes, making it easy to find and then cast to fish and structure.
  • What's Included: MEGA 360 Imaging transducer with attached power cable and transducer cable, 10' SOLIX transducer extension cable, 10' HELIX transducer adapter cable, 10' MEGA 360 power cable and adjustable, aluminum MEGA 360 Imaging mounting bracket with depth retaining ring for shaft.
Check Stock

Donner Acoustic Guitar Pickup, DSS-3 Guitar Pickups Sound Seeker Pure Sound Transducer for Cello Banjo Ukulele Mandolin Guitar Microphone Pickup

  • 【Widely Used】Donner 3 transducer pickup system is widely used on various instruments, like acoustic guitar, classical guitar, resonator guitar, ukulele, banjo, mandolin, wood bass, cello, violin, fiddle, Dobro, Cajon, dulcimer, steel drums, etc. Suitable for western music and folk instruments..
  • 【Pure & Original Sound】Fixing a rubber to adjust the tone and make your guitar more perfect. Donner DSS-3 pickup system collects clear and true sound and reproduces all strings nicely balanced. Let you enjoy high sound reproduction..
  • 【User-friendly Set】Package includes 1 passive guitar pickup, 1 set of glue, 4 3M stickers, 3 cable holders, 1x fixture leather pad, 1 ABS fixed clip. No battery and soldering is required. Pre-wired piezo mic saves time for you. Easy to install, convenient to use..
  • 【Easy External & Internal Installation】 Simply take seconds to use the provided green glue or 3M stickers to affix 3 piezos to the instrument's surface, external installation is finished. Or follow our easy internal instructions to install the pickup inside. You can “DIY” your favorite sound with a free combination of the installation position..
  • 【High Quality】Never worry that your audio cable interface gets loose suddenly when you have a performance. ....
Check Stock

Weller ML500MP Mini Butane Soldering Iron, One Color, One Size

  • Weller ML500MP Butane Mini-iron ,Piezo lgnition.
  • Use For Soldering, Heat-Shrink Tubing and Electronics.
  • Adjustable Gas Flow Valve Controls Temperature Range.
  • Tip Temperature: 750-Degree f – 900-Degree f.
  • Up To 30 Min Continuous Use On Medium Setting.
Check Stock

MKR-MDI-2-1852086 MDI Transducer Adapter Cable Replacement for Humminbird Helix 7 G3 / G4 Fish Finder

  • 【Compatibility】1852086 transducer adapter cable is compatible with Humminbird HELIX 7 G3 / G4 fish finder with a built-in MEGA Down Imaging transducer on your trolling motor, and adapter is not required for SOLIX models..
  • 【High Quality Material】1852086 transducer adapter cable is made of latest and high quality materials with sturdiness and durability performance, waterproof, reliable use, for longer service life..
  • 【Great Connection】1852086 transducer adapter cable connects your fish finder to a trolling motor equipped with Built-In MEGA Down Imaging, can be able to scan deeper and wider without sacrificing clarity..
  • 【Easy Installation】1852086 transducer adapter cable is easy to install and adapt, improving efficiency, save you time. And Shielded cable for crystal clear MEGA Down Imaging sonar performance, you can scan clearly the images in real-time.It’s a ideal choice for you..
  • 【100% Satisfaction Guarantee】If you have any questions about 1852086 transducer adapter cable, please contact with us. We support refund within 30-Day guarantee, 12-Month warranty for....
Check Stock

Light Tackle Surf Perch

  • Includes a Panoptix LiveScope transducer with live, real-time scanning sonar that allows you to see up to 200’ in any direction.
  • Two modes in one transducer — LiveScope Forward and LiveScope Down — to adapt to your fishing technique.
  • locate schools of fish, and know exactly where to drill your next hole (when pair with your compatible ECHOMAP UHD unit).
  • Rugged, portable carrying case fits your ECHOMAP UHD unit plus all included parts.
  • Kit accessories include a swivel pole mount for the Panoptix transducer, foam float and cable grommet, 12Ah battery, charger, power cable and transducer adapter cable.
Check Stock