Top Pilot Counterbore Drill Set

FTG USA Countersink Drill Bit Set 6 Pc #10 (3/16') Wood Countersink Drill Bit Pro Pack Countersink Set, Tapered Countersink Bit, 1 Stop Collar, Hex Wrench, Woodworking Countersink Drill Bits

  • ...TG 2350P counter sinker drill bit for wood.
  • Wood drill bit set with counter bore chamfer angle 82 degree, smooth countersinking in hard and soft wood, tapered holes for screws. Adjustable countersink drill bit with quality built depth adjustable counter bore attaches to flat on shank with 2 hex screws for controlled pilot hole depth. Best adjustable wood countersink drill bits set ideal for woodworking. Countersink tool set made with countersink bits for wood.
  • Tapered drill bits pointed tip and wide flute for drilling fast, clean pilot hole, ensures tight fit for screws. Countersink hex drill bit set with tapered drill bit can be replaced with FTG replacement taper drill bits countersink for extended wood bit. Countersink drill bits for wood made to drill, countersink, and counter-bore in 1 step sink counter set. Counter sink bits designed as to work as wood drill bits.
  • THIRD-PARTY TESTED by US Accredited Lab - HSS M2 Grade 6542 countersink drill bit for wood with tapered drill bits. Wood countersink bit with wider flute shape for increased chip flow. Drill countersink set has logo brand name laser printed on each countersink bit quick change 1/4" hex shank. Tapered drill bit with countersink set, drill bits secured with pin, professional FTG Maximum To....
Check Stock

1 1/4\ Aircraft Counterbore, Carbide Tipped, (Reduced Shank Counterbore), 3/8\ Shank Diameter, 3 Flutes, 2 3/4\ OAL, (1.25\ Diameter, 1-1/4), 52240, USA Made

  • For counterboring and spotfacing in applications where machine requires a smaller shank.
  • 1/64" Corner Radius, Tool Diameter Tolerance: +.001"/-0". Shank Diameter Tolerance: +0"/-.001".
  • Pilot Hole Diameter:1/4, If using a pilot this is the shank diameter of the pilot you should choose.
  • Minimum Cut Diameter: .281" Because there is a pilot hole the tool will not cut below this diameter..
  • Set screw to hold a pilot or drill bit in place (if you are using a pilot or drill bit).
Check Stock

Drill America DEWCBR Series Qualtech High-Speed Steel Aircraft Counterbore 1/4 Shank Diameter 3/32 Pilot 2-3/8 Length 3/8 Size Pack of 1

  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance.
  • Round shanks allow use with a wide variety of toolholding systems.
  • Counterboring is the enlargement of a portion of a hole that has previously been formed.
  • The counterbor is a two-piece construction, having an integral shank and counterbore-cutter, and a pilot that is interchangeable, which provides flexibility in the use of the tool.
Check Stock

FTG USA Wood Countersink Drill Bit Set 5 Pc Countersink Drill Bit #4#6#8#10#12 Countersink Bit for Woodworking, Tapered Drill Bits Secured with Pin to Hex Shank, 2 Stop Collar, 1 Allen Wrench

  • ...t, 4 Flute cutter, 5 size drill bits sets with countersink #4(7/64") #6(9/64") #8(11/64") #10(3/16") #12(7/32") 2 Stop Collar, 1 Allen Wrench. Counter-bore, and wood plugs size 3/8" and 1/2".
  • FTG BITS SECURED with Pin Never Come Loose from shank. Tapered drill bits pointed tip and wide flute for drilling fast, clean pilot hole, ensures tight fit for screws. Countersink hex drill bit set with tapered drill bit can be replaced with FTG replacement taper drill bits countersink for extended wood bit. Countersink drill bits for wood made to drill, countersink, and counter-bore in 1 step sink counter set. Counter sink bits designed as to work as wood drill bits.
  • DRILL PERFECT tapered hole drill bit every time. Wood drill bit set with counter bore chamfer angle 82-degree, smooth countersinking in hard and soft wood, tapered holes for screws. Adjustable countersink drill bit with quality-built depth adjustable counter bore attaches to flat on shank with 2 hex screws for controlled pilot hole depth. Best adjustable wood countersink drill bits set ideal for woodworking. Hex drill bit set tool made with tapered countersink bits for wood.
  • THIRD-PARTY TESTED by US Accredited Lab - HSS M2 Grade 6542 countersink drill bit for wood with tapered drill bits. Wood counter....
Check Stock

DEWALT Drill Bit, #6 Countersink, 9/64-Inch (DW2537)

  • Drill, countersink and counterbore in one step.
  • Four-cutter countersink and tapered drill bit provide superior speed and ideal finish.
  • Replacement tapered bits offered. Product consist of Drill Bit Only no tool holder.
Check Stock

FTG USA Countersink Drill Bit Set 5 Pc Countersink Drill Bit #4 6 8 10 12 Tapered Drill Bits Secured with Pin to 1/4 Hex Shank 1 Allen Wrench Counter Sinker Drill Bit Set for Woodworking

  • ...t, 4 Flute cutter, 5 size drill bits sets with countersink #4(7/64") #6(9/64") #8(11/64") #10(3/16") #12(7/32") 2 Stop Collar, 1 Allen Wrench. Counter-bore, and wood plugs size 3/8" and 1/2".
  • FTG BITS SECURED with Pin Never Come Loose from shank. Tapered drill bits pointed tip and wide flute for drilling fast, clean pilot hole, ensures tight fit for screws. Countersink hex drill bit set with tapered drill bit can be replaced with FTG replacement taper drill bits countersink for extended wood bit. Countersink drill bits for wood made to drill, countersink, and counter-bore in 1 step sink counter set. Counter sink bits designed as to work as wood drill bits.
  • DRILL PERFECT tapered hole drill bit every time. Wood drill bit set with counter bore chamfer angle 82-degree, smooth countersinking in hard and soft wood, tapered holes for screws. Adjustable countersink drill bit with quality-built depth adjustable counter bore attaches to flat on shank with 2 hex screws for controlled pilot hole depth. Best adjustable wood countersink drill bits set ideal for woodworking. Hex drill bit set tool made with tapered countersink bits for wood.
  • THIRD-PARTY TESTED by US Accredited Lab - HSS M2 Grade 6542 countersink drill bit for wood with tapered drill bits. Wood counter....
Check Stock

DEWALT DW2567 #6 Countersink with 9/64-Inch Drill Bit

  • Drill, countersink and counterbore in one step.
  • Four-cutter countersink and tapered drill bit provide superior speed and ideal finish.
  • Tapered drill bit can be replaced for extended life.
Check Stock

FTG USA Wood Countersink Drill Bit Set 6 Sizes Set Countersink HSS M2 Tapered Drill Bits, Quick Change Hex Shank Countersink bit, 2 Stop Collar, 1 Allen Wrench, Countersink Drill Bit for Woodworking

  • Wood drill bit set with adjustable 4 Flute Cutter counter bore chamfer angle 82 degree, smooth countersinking in hard and soft wood, tapered holes for screws. Adjustable countersink drill bit with quality built depth adjustable counter bore attaches to flat on shank with 2 hex screws for controlled pilot hole depth. Best adjustable wood countersink drill bits set ideal for woodworking. Countersink tool set made with countersink bits for wood, FTG 2341P tapered countersink drill bits.
  • Tapered drill bits pointed tip and wide flute for drilling fast, clean pilot hole, ensures tight fit for screws. Countersink hex drill bit set with tapered drill bit can be replaced with FTG replacement taper drill bits countersink for extended wood bit. Countersink drill bits for wood made to drill, countersink, and counter-bore in 1 step sink counter set. Counter sink bits designed as to work as wood drill bits.
  • THIRD-PARTY TESTED by US Accredited Lab - HSS M2 Grade 6542 countersink drill bit for wood with tapered drill bits. Wood countersink bit with wider flute shape for increased chip flow. Bits secured with pin Never Come Loose from shank. Drill countersink set with logo brand name laser printed on each countersink bit quick change 1/4" hex shan....
Check Stock

QWORK Twin Blade Adjustable Hole Saw - Cutter with ABS Dust Shield for Recessed Lights Speakers Cornhole Boards Cuts Plywood Sheetrock Plaster Fiberglass Plastic, 1-5/8\ to 8\ ( 40-200mm )

  • Professional Cutting - Hole saw cuts smooth and even 8" diameter holes through wood, drywall, plaster and plastic.
  • Cutting depth up to 3/4"(19mm) from one side, 1-1/8"(30mm) from two sides..
  • Safe & Clean - Ball bearing mounted ABS dust shield with soft silicon rubber gasket to trap the dust and shavings to prevent them from going airborne and making mess in your furnished home. It is also safe to use as protection equipment for hole cutting application..
  • Easy to Use - Includes everything you need to do-it-yourself, mandrel and drill bit work with any 3/8" drills & up..
  • Complete Set - This kit includes one professional grade adjustable hole cutter with two replaceable pilot drill bits (1x auger type Self-Feed pilot bit + 1x HSS pilot bit), two sets of replaceable cutting blades (1 set of high speed steel blades + 1 set of tungsten carbide blades), one ABS dust shield, one adjustment hex wrench, 5 Pcs brad-point wood drill bits and 5 Pcs Masonry drill bits 5/32.
Check Stock

Eagles 4PCS Self centering Hinge Drill Bits for Door Cabinet + 5PCS HSS Woodworking Countersink Drill Bit Set with Free Wrench for Pilot Holes

  • 【Unique Combinate】This Woodworking drill set included 4pcs Self centering Drill Bits, 5pcs HSS Countersink Drill Bit and free Quick Change Hex Shank.
  • 【Precision Drilling】Center drill bit accurately drill pilot holes in hinges, handles, drawer slides, and other hardware, ensure the screws are straight and flush for proper hardware installation.
  • 【Wood chips are automatically discharged】 Sawdust will be automatically drained from both sides of the holes, without drill blocked,you don’t have to remove wood chips , effectively increasing your work.
  • 【Woodworking Countersink Drill Bits set】 Woodworking Chamfer, can drill the countersink hole and counter bores pilot hole and keep both on the same axis.after the screw is screwed on, the screw cap is below the plane of the board!.
  • 【Adjustable】Drilling length can be adjusted for #5 #6 #8 #10 #12 screws length simply by use a wrench to remove or adjust the setscrew..
Check Stock

Drill America - DEWA/CCBR9/16 DEWCBR Series Qualtech High-Speed Steel Aircraft Counterbore, 1/4\ Shank Diameter, 1/8\ Pilot, 2-13/16\ Length, 9/16\ Size (Pack of 1)

  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance.
  • Round shanks allow use with a wide variety of toolholding systems.
  • Counterboring is the enlargement of a portion of a hole that has previously been formed.
  • The counterbor is a two-piece construction, having an integral shank and counterbore-cutter, and a pilot that is interchangeable, which provides flexibility in the use of the tool.
Check Stock

20Pcs Forstner Drill Bits, Rocaris Tungsten Steel Woodworking Hole Saw Set, Wood Cutter Auger Opener Round Shank Drilling Cutting Tool (14mm-50mm)

  • 【High Quality Material】:The forstner drill bitsare made from tungsten steel and being hot-treated,sharp edge, high hardness, accurate positioning,high precision,smooth cutting,impact resistance,high toughness.more smooth,less noise..
  • 【Various Sizes】: 14mm(0.55''), 15mm(19/32"), 16mm(5/8"), 17mm(43/64"), 18mm(45/64"), 19mm(3/4"), 20mm(25/32"), 21mm(53/64"), 22mm(55/64"), 23mm(29/32"), 24mm(15/16"), 25mm(1"), 26mm(1-1/16"), 28mm(1-1/8"), 30mm(1-3/16"), 32mm(1-1/4"), 35mm(1-3/8"),40mm(1-3/5"), 50mm(1.96'') which can meet your various needs in this professional set..
  • 【Great performance】Sharp edge, accurate positioning, high hardness, impact resistance, high precision, smooth cutting, high toughness. Forstner Drill Bits can drill clean flat bottom holes with no chipping..
  • 【Widely Used】:Drilling Counterbore can be used in wood drilling, installation of a spherical door slightly、 the drawer slightly、plastic products and gypsum board. Safer and more accurate to use this drill bit in a drill press..
  • 【Application】：Suitable for pistol drill, bench drill, vertical drilling machine hand held electric drill, stand motor-driven drilling machine and mobile ribbon type magnetism drilling machine,etc..
Check Stock