Top Pilot Shaft Reamer

Ground Anchor Kit, Set of 8 Earth Augers, Drill Ready, 15' Long, 3' Wide Helix, 3/8' Diameter Stake Shaft, Spiral Ground Stakes With Removable Ring

• ... campers, fencing and fence posts, trees, vertical hammock stands, and more!.
• PREMIUM QUALITY: Eight large 15 inch (38 cm) long heavy duty anchors. 3/8 inch (9.5 mm) diameter solid steel shaft with 3 inch wide helixes for maximum holding power. 360 degree welds between spiral helix and shaft offer fortified, durable pilot ends to plant into the dirt. Industrial strength hardware to fasten your biggest loads..
• USER FRIENDLY: Sharp edged tips yields easy penetration into the land. Included metal torque bar, when placed through the eyelet at the end of the auger shaft, provides ample leverage to drive down the anchors into the soil without having to over exert oneself or use a drill..
• ACCESSORIES: Includes rubber edge guards for anchor pilot ends permits storing safely..
• 1-year warranty – We are so confident you’ll love the products that we give a 1-year warranty on the purchase. If, for some reason you are not happy with your order, reach out to us and we will gladly assist you..

PVC Pipe Reamer with 1-½-Inch Head Aluminum, PVC Fitting Saver, PVC Socket Saver with 0.315″ Hex Shaft, For Water Lines, Drain Lines, Vent Lines

• Robust Build Quality: This PVC fitting saver built with premium quality aluminum alloy body with stainless steel hex key shaft, durability and high hardness..
• Feature: Whether you are a professional or not, Gohelper PVC reamer is excellent for you. It is works great for Schedule 40 PVC Pipe, CPVC and ABS Ventilation pipe, drain pipe, water pipe, but it does NOT work on schedule 80 pipe..
• Compatibility: PVC fitting saver come with 0.315″ hex key shaft design can be compatible with standard drills, cordless drills, or impact drills. It is very suitable for family and temporary work..
• Durable and Versatile: Square carbide insert provides four cutting surface, you can be turned 90 degrees for new cutting surface before use, the cutting efficiency is higher and faster..
• Note: It is recommended to use a variable-speed electric drill with low-speed cutting.
• Appropriately add water for cooling to prevent the pipeline from melting at high temperature,Check if the hex key shaft is locked or not before use. Warm tips: CN,US,EU Patent Pending..

Tooth Clutch - 1.5000 in Bore, Shaft Mounted, Air Engaged/Spring Release, Open Design, 1/8 NPT, Finished w/Keyway & 2 SS, Pilot Mount

• pilot or drive flange bolt circle data: 4, 0.250-20 Holes @ 90 on a 4.750 inch B.C..

Tooth Clutch - 0.6250 in Bore, Shaft Mounted, Air Engaged/Spring Release, Enclosed Design, 1/8 NPT, Finished w/Keyway & 2 SS, Pilot Mount

• pilot or drive flange bolt circle data: 6, 0.190-24 Holes @ 60 on a 2.750 inch B.C..

Pen Mill Set, 7 PC Pen Barrel Trimming System with 3/4 inch Cutting Head, 7mm, 8mm, 3/8 inch, 10mm Pilot Cutter Shafts, 0 Size Adaptor Sleeve and Hex Key Wrench, Pen Barrel Mill Trimmer Set by Tackpro

• 【7 PC Pen Barrel Trimming System Inclusion】 3/8", 7mm, 8mm, and 10mm pilot shaft, 3/4" steel cutter & hex key Wrench & sleeve adaptor..
• 【Fit to your Different requirement] For pens using 7 mm, 8 mm, 10 mm and 3/8" pilot shaft..
• 【Best Choice for Your Hobby】 If you love to turn pens, then this kit is a must for your pen blank preparation process. Typically after you have glued the brass tubes into your pen blanks and the tube is completely dry, it is common practice to clean up, square and trim the ends of the blanks..
• 【Easy to Use】 Cutting shafts will mount into a drill chuck or lathe chuck, the shaft will clean and remove any excess glue from the tubes. Cleanly remove excess glue from your turned pen tube and blank..
• 【Lifetime Warranty】Tackpro are committed to provide the best service for our customer on Amazon, we are take responsible to our item, if you have any problem please feel free to contact us and we will help you and provide you lifetime quality guarantee..

PVC Fitting Saver with 1-½-Inch and 2 Inch Head Aluminum, PVC Pipe Reamer, PVC Socket Saver with 0.315" Hex Shaft, For Water Lines, Drain Lines, Vent Lines

• Feature: Whether you are a professional or not, Gohelper PVC reamer is excellent for you. It works great on Schedule 40 PVC Pipe, CPVC and ABS Ventilation pipe, drain pipe, water pipe, but it does NOT work on schedule 80 pipe..
• Robust Build Quality: This PVC fitting saver built with premium quality aluminum alloy body with stainless steel hex key shaft, durability and high hardness..
• Durable and Versatile: Square carbide insert provides four cutting surface, you can be turned 90 degrees for new cutting surface before use, the cutting efficiency is higher and faster..
• Compatibility: PVC fitting saver come with 0.315" hex key shaft design can be compatible with standard drills, cordless drills, or impact drills. It is very suitable for family and temporary work..
• Note: It is recommended to use a variable-speed electric drill with low-speed cutting.
• Appropriately add water for cooling to prevent the pipeline from melting at high temperature,Check if the hex key shaft is locked or not before use. Warm tips: CN,US,EU Patent Pending..

Minn Kota 1363749 Riptide Terrova Saltwater Electric-steer Bow-Mount Trolling Motor with i-Pilot GPS (Includes Micro Remote, NO Heading Sensor), 80 lbs Thrust, 60' Shaft

• i-Pilot GPS Trolling System: The most-trusted GPS system in fishing. i-Pilot uses GPS to control your trolling motor with incredible features that keep you on the fish. Set Spot-Locks, record paths, control speed and steering, and more. i-Pilot makes boat positioning and control automatic, and you can take command from its easy-to-read large LCD screen..
• Spot-Lock with Jog: Spot-Lock will hold you in place with unparalleled GPS accuracy. Available on i-Pilot Link GPS system that is pre-installed, Spot-Lock gives you the power to stay right on top of any productive fishing spot, without touching your trolling motor. With the included heading sensor, you can use Jog to move your Spot-Lock location five feet in any direction. Activate Spot-Lock from the i-Pilot Link remote or Humminbird fish finder..
• Advanced Corrosion Protection: Riptide motor lower unit housings are grit-blasted, then coated in aluminum to prevent oxidization and rust. Then, a final layer of powder coat paint provides the ultimate protection..
• Includes Micro Remote, NO Heading Sensor.

Minn Kota 1363729 Riptide Terrova Saltwater Electric-Steer Bow-Mount Trolling Motor with i-Pilot GPS (Includes Micro Remote, NO Heading Sensor), 112-lbs Thrust, 72' Shaft

• i-Pilot GPS Trolling System: The most-trusted GPS system in fishing. i-Pilot uses GPS to control your trolling motor with incredible features that keep you on the fish. Set Spot-Locks, record paths, control speed and steering, and more. i-Pilot makes boat positioning and control automatic, and you can take command from its easy-to-read large LCD screen..
• Spot-Lock with Jog: Spot-Lock will hold you in place with unparalleled GPS accuracy. Available on i-Pilot Link GPS system that is pre-installed, Spot-Lock gives you the power to stay right on top of any productive fishing spot, without touching your trolling motor. With the included heading sensor, you can use Jog to move your Spot-Lock location five feet in any direction. Activate Spot-Lock from the i-Pilot Link remote or Humminbird fish finder..
• Advanced Corrosion Protection: Riptide motor lower unit housings are grit-blasted, then coated in aluminum to prevent oxidization and rust. Then, a final layer of powder coat paint provides the ultimate protection..
• Includes Micro Remote, NO Heading Sensor.

KIWI design Link Cable 20FT Compatible with Quest 2/1/Pro and Pico 4, 3.0 Link Cable Accessories for PC VR Headset

• Universal Sonar 2: Keeps your transducer and wiring completely concealed and protected, running everything through the trolling motor's shaft, with shielded connectors.
• i-Pilot Link Integrated GPS Trolling System: i-Pilot Link gives you unprecedented control over your boat by linking your trolling motor to your Humminbird fish finder. Control your trolling motor from Link's color touch-screen remote or the Humminbird. You can set Spot-Locks, record paths, follow depth contours, automatically navigate to your favorite spots, control speed and steering, and more.
• Digital Maximizer: Provides up to 5 times longer run time on a single battery charge. These variable speed trolling motors let you dial in your exact speed, and they deliver only as much power as you need, helping to conserve your battery for a full day of fishing.
• Weedless Wedge 2 Prop: With swept-back flared blades to power through anything without battery-draining chopping and hacking, the Weedless Wedge 2 is one of the most trusted props in fishing.

Tooth Clutch - 50 mm Bore, Shaft Mounted, Air Engaged/Spring Release, Open Design, 1/4 NPT, Finished w/Keyway & 2 SS, Pilot Mount

Meter Star CE/CSA Certification Propane LPG Gas Room Space Heater & Outdoor Patio Heater Replacement Parts Gas control Safety Valve

• Low pressure 65mbar gas valve thermocouple end M8*1.
• 7/16-20UNS thread on outlet & M10*1 On inlet side.
• M8*1 female thread on pilot port for 4mm copper or alumium tube on pilot burner side.
• Shaft for 8mm knob,CE/ CSA approved parts.
• Suitable for Gas patio heater and Room Space heater.

Sabo Lemon Citrus Reamer Juicer 4-in-1 Multitool with Zester Channel Knife Paring Knife for Cocktail and Bar

• 4-in-1 MULTI TOOL: This multi tool features a lemon citrus reamer for juicing, a paring knife for cutting up lemons and citrus fruits, a channel knife and zester for peeling and garnishing. It is a handy bar tool for making cocktails, drinks, and garnishing along the way..
• FOOD SAFE AND DURABLE: The citrus reamer is made with hard ABS plastic and is FDA compliant food safe. The paring knife and zester is made with sharp polished stainless steel and can last for a long time..
• SAVE YOUR SHELF SPACE: For those who don’t want to have multiple tools hogging up your shelf space in your kitchen, this reamer combines multiple tools into one so you don’t have to look for each individual tool anymore..
• JUST THE RIGHT SIZE: The reamer tool is 6″ long, and the reamer head is just the right size for the average citrus fruits like lemons and oranges..
• DISHWASHER SAFE: The plastic reamer is dishwasher safe and very easy to clean..