Top Pin Locking Backs

ARTIBETTER 100pcs Rubber Pin Backs Lapel Pin Backs Butterfly Clutch Backings Pin Cap Keepers Star Shape for Badges Pink

  • This set of pin backings is enough for replacement to your badges, pins etc. It is also used for DIY crafts pin, lapel pins etc. No other tools....
  • Light weight and portable, easy to carry and storage. Practical Pin Badges Lapel Pin Backing Cap Tie Tacks Pins Holders.
  • The pin backing is tight and they are not easy to fall off. Rubber Pin Backs Lapel Pin Backs Butterfly Clutch Backings Pin Cap Keepers Star Shape for....
  • Made in good material for keeping pin stay in place. Star shaped appearance makes it more delicate than others..
  • locking lapel pin backs Pin Back Replacement.
Check Stock

Rustark 120Pcs 3 Sizes Silver Tone Pin Back Clasp Brooch for Badge Crafts, Jewelry Crafting, Sewing Fabric, Making Corsage - Small/Medium/Large

  • ✔ MULTI-PURPOSE: Pin backs can be glued onto any surface to DIY crafts. Good for making pins, name badges and similar craft items..
  • ✔ EASY TO USE: Pin back with 3 or 2 holes, easy to operate. You can stick decorative crafts with glue, or sew the hole directly..
  • ✔ PIN BACKS LOCKING: Annular bayonet design. When you wear the corsages and close the bayonet, it will never drop, so don’t worry the risks of falling. Let you avoid embarrassing situations..
  • ✔ DURABLE: Stainless steel plated, not easy to get rusty. It still keep bright and shining after used for a long time. Not easy to break..
  • ✔ PACKING INCLUDES: Package includes 3 size, every size have 40 pieces of pin backs, 120Pcs in total. The large and medium pin backs have 3 holes, the small pin backs 2 holes for attaching beads, dangles, fringe and more to create a personalized accessory that can be worn on coats, sweaters or hats..
Check Stock

30 Pieces Metal Pin Backs Locking Pin Keepers Locking Clasp

  • Quality Material : These pin backs locking clasps are made of nickel-plated copper,which are durable and sturdy.They can lock your pins firmly to keep them secure ..
  • Multi-function : These mental pin backs are suitable for pins, insignia, name tags, display books, lanyards, bags, vests, hats, badge, collectibles, etc..
  • Easy to use : The pin back locking is easy on-off action, spring loaded fastener simply need you to push to lock them, then push on the base to secure them ,finally pull to loosen the lock and remove it ..
  • Reasonable Pin Size: The size of the pins back is 0.39in / 1 cm in diameter, 0.24in / 0.6 cm in height.It is convenient to carry..
  • Satisfaction Guarantee: We sincerely provide you with good enough products and services. If you are not satisfied with the product, please contact us, we will try our best to help you solve it..
Check Stock

Pin Keepers Pin Locks Locking Clasp Pin Backs with Wrench (24 Pieces)

  • DIMENSIONS: Locking pin keepers are 5mm (0.2 Inch) in diameter, with a height of 7mm (0.28 Inch). Each set comes with 24 silver locking pin backs and 2 Allen wrenches (locking tools)..
  • HIGH QUALITY & SECURE: Has a shiny and smooth silver finish. Made from sturdy nickel plated iron that will resist rust. Designed to secure your pins by locking them firmly in place..
  • EASY TO USE: To use, simply insert the pin post into the pin keeper and use the micro hex tool to tighten the screw, locking your pin in place. Each pin lock has the small screw already started for you, so you do not have to mess with small parts..
  • VERSATILE: Great for securing pins, badges, insignias or name tags onto your uniform, vest, cap, hat, jacket, bags and more! Have confidence knowing you will not lose your pins due to them falling off..
  • 100% SATISFACTION GUARANTEE - Purchase with confidence! We stand by our products and offer a 30 day money back guarantee, no questions asked!.
Check Stock

30PCS Locking Pin Backs Locking Pin Keepers Clasp, Ceryvop Metal Pin Locks Back

  • [Quality Material] Upgraded locking pin backs are made of quality nickel-plated copper, durable and sturdy, unique snap design, locks your needle securely, keep them secure will not fall off or get lost..
  • [Easy to Use] No tools required, spring loaded latch design for easier locking and removal, just push the base to lock and secure them, pull to release the lock and remove it. change your pins whenever you want..
  • [Widely Used] The metal pin backs are suitable for pins, lapel pin, name tags, display books, lanyards, bags, vests, hats, jean button, badge, enamel pin and DIY crafts etc..
  • [Best Choic] 30PCS pin back locks with clear storage case packed, more convenient storage, The size of the pins back is 0.4inch diameter, 0.25inch height, small and easy to use. better meet the decorating needs of you and your family..
  • [Satisfaction Guarantee] We sincerely provide you with high quality products and services. If you have any questions about our products, please contact us and we will provide you with a satisfactory solution for you within 24 hours!.
Check Stock

240pcs Bar Pins Brooch Pin Backs for Jewelry Making, Heliltd Metal Brooch Safety Pin Clasps 4 Sizes Tone Bar Pin Backs for Badge Crafts Making Corsage Name Tags Jewelry DIY Crafting Sewing Fabric

  • ... pin backs are suitable for homemade craft pins and jewelry making, brooch pins, costume jewelry, DIY crafting, sewing or corsage making name tag pins, insignia badges, citation bars, flower pins, hair clips, toy pins, bottlecap pins, ribbons, boutonnieres, unique and personalized ornaments, etc..
  • 【GOOD GIFT】Our locking pins backs are good gifts for family, friends, kids for wedding ,baby shower, bridal shower, Party, Christmas, etc. You can make many beautiful and unique brooches according to your own interest, and they can be worn on shirts, sweaters, jackets, T-shirts, hats or backpacks. Make yourself more attractive..
Check Stock

Aylifu Tie Tacks and Clutch Backs Set, 30 Pieces Metal Pin Backs Locking Pin Keepers with 30 Pieces 10mm Tie Tacks Blank Pins (Gold)- No Tool Required

  • PACKAGE INCLUDED -- 30 pieces metal locking pin backs and 30 pieces blank pins both in gold color, enough quantity for your daily use..
  • EASY-TO-USE -- With the spring-loaded fastener design, these pin backings are easy to put on and take off without a tool..
  • MEASUREMENT -- Each pin sizes is approx. 10 mm/ 0.4 inch in diameter, 9 mm in length, clutch pin back size is approx. 10 mm in diameter, 7 mm in height..
  • EXCELLENT DESIGN -- Pin backs and pin keepers are made of stainless steel, they are sturdy and colorfast, and the smooth surface prevent the skin from getting stuck injury..
  • EXTENSIVE USE -- Good replacement for lost backs badges, name tags, pins. Can be applied to tie tacks, lapel pins, badge insignia, citation bars, service bars, jewelry making and so on..
Check Stock

BEADNOVA Brooch Pin Backs Bar Pin Back Clasp Silver Tone Brooch Pin Backs with Safety Locking for Craft Name Badge (36pcs)

  • MATERIAL & SIZE – Brooch Pin Backs made in stainless steel, it is not easy to get rusty. Each flat brooch pin sizes approximately 0.98 inches long for each..
  • SMOOTH TO FASTEN & SECURE – Smooth opening and closing, yet the pin back clasp is well secured because of the pin backs locking feature. For details of how to use please refer to picture.
  • NICELY PACKAGED – Each box contains 36pcs silver tone flat brooch pins. They are well packaged in a clear plastic container to avoid bending and damage in shipping or storage..
  • VASITLE USES - Our flat brooch pins are prefect for 1 inch buttons. They work great for attaching beads, dangles and jewellery findings to create a personalized ornaments. If you love craft projects, sewing fabric, making corsage, name badges and more, you will find our 1 inch pins have very versatile uses..
  • EASY TO ATTACH - These brooch pins backs with 3 holes, and their backs are flat. You can sew the holes directly or stick the attached crafts with glue..
Check Stock

100 Pcs Silver Safety Pins 1 Inch Pin Back Clasp Brooch Pins Backs with 3 Holes Safety Locking for Making Corsage, Name Tags, Badges, Citation Bars

  • Size —— The package including 100(±2%) pieces brooch clasps, each flat brooch pin sizes approximately 0.98 inches long..
  • Robust and secure — Bar pin brooch clasp is made of iron. Stainless steel plated, not easy to rust and damage.
  • and these are incredibly sturdy and secure..
  • Smooth to Fasten & Secure — These pin backs with locking function and have clasps that are reasonably easy to open and shut, securely fixed..
  • Easy to Attach — These brooch pins backs with 3 holes and are flat on the back.
  • Pin backs can be glued or directly onto any surface to DIY crafts..
  • Widely Used —These bar pins are excellent for making brooches or replacement to your torn or lost one.
  • And be applied to tie tacks, badge insignia, citation bars, name tag, etc..
Check Stock

Brass Clutch Badge Insignia Clutches Pin Backs Replacement (Gold, 50 Pieces)

  • Material: the small clutch is made of quality nickel plated brass.
  • Unnoticeable while lock pins firmly and keep them secure.
  • Metal material makes it anti-wear, sturdy.
  • Package contents: each clutches pin size is approximately 10 mm in diameter, packaged in clear plastic case for neat storage.
  • Quantity are enough for replacement to your torn or lost one.
  • Exquisite design:clutch pin backs are great match for most metal pin.
  • clutch provides good grip of pin to keep it stay in place.
  • With its firm and protective grip, rest assured that you will never lose another pin again.
  • Easy to use: featuring a spring-loaded fastener, these pin backings are easy to put on and take off.
  • Simply push to secure onto pin post and pull the trigger while holding onto your pin to release.
  • These locking pin backs are a great alternative to rubber clutches.
  • Wide usage: the metal pin back can be applied with tie tacks and lapel pins that have lost their backings, or with your own homemade craft pins.
  • Can also be applied as the back of lapel pins, hat, tie tacks, name tag, toy pins, citation bars, service bar, etc..
Check Stock

BEADNOVA Pin Keeper with Allen Wrench Pin Back for Backpack Enamel Pins Label Pins Locking (50pcs, Allen Wrench Included)

  • PIN KEEPER SIZE: Our pin keepers are 5.5 mm/ 0.2 inch in diameter, 9 mm/ 0.35 inch in height. Come with the pack 2pcs Allen wrench approximately 4.5 cm/ 1.8 inch in length. All our pin locks are well made with smooth surface. Work well with most of the pins to secure it from falling off or losing..
  • STRONG PIN LOCK: The pin lock is made of nickel-plated brass material which is strong and high resistant to rust and fade. You can use the pin locking clasp in a period of time..
  • PACK INCLUDES: 50pcs pin keepers and 5pcs Allen wrench. You get all you need to keep you pins in place..
  • WIDE USEAGE: Our pin keeper is suitable for locking pin backs, Disney locking pin, as pin back for insignia, name tag, lanyards, bags, hats, badge. Use pin keeper to secure pins on leather, vest, jacket, cap, work uniform and cards..
  • EASY TO USE: Put a pin keeper in the back of the pin. Use the provided Allen wrench to secure the pin and pin back tight. Just two easy steps to attach the pin lock, and you never have to worry losing your loving pins..
Check Stock

BikeMaster Heavy-Duty Wheel Chock

  • Perfect for the shop, trailer or truck bed, mounts directly to your floor or truck bed with supplied hardware. Heavy-duty steel construction.
  • Four-position locking pin to prevent accidental roll backs. One person operation. Adjustable self-locking chock. Works on tires up to 6-1/2″ wide.
  • Heavy-duty steel construction for years of service.
Check Stock