Top Pin lug Hose Shank

Puri Tech 6 Pack Universal Pool Cleaner Suction Hose 48 Inches Long White Color for Kreepy Krauly, Baracuda G3/G4, Navigator, & More 4 Feet Long

  • Pool Supplies - Flat discharge hoses for swimming pools with durable pvc water hose and heavy duty connectors resist to oils, grease, acids, and many chemicals. Essential pool supplies as sump pump discharge hose, trash pump discharge hose, pool drain hose..
  • High Quality - Discharge hose is made of flexible PVC material reinforced with a continuous high tensile strength polyester yarn circularly woven to prevent leaks and tears for durable use. Heavy duty connectors (aluminum Pin Lug fittings) prevent oxidation and rust..
  • Standard Pump Hose - Hose Length: 50 feet.
  • Temperature Range : 23°F to 149°F (-5°C to 65°C).
  • Scope of use: In-ground and above-ground pool equipment.(note: hose measures about 3.15 inch width when folding lay-flat).
  • Easy to Storage - Water discharge hose is fitted with the connector, which can be easy to directly connect to the pump, and after using, easily flat rolled up and store in a dry place out of direct sunlight for storage..
  • Excellent Customer Service - Our aim is to provide consumers with high grade and more practical pool hoses. Any questions about the product, please CONTACT US. We will reply you within 24 Hours and solve your problems until you’re satisfied..
Check Stock

DAVCO 2' x 100 ft Pool Backwash Hose, Heavy Duty Reinforced Blue PVC Lay Flat Water Discharge Pump Hoses For Swimming Drain Pools and Clean Filters,with 1 Clamp

  • The pool backwash hose is made of PVC and reinforced with polyester yarn, can withstand 90 psi working pressure during water supply and drainage, heavy-duty, superior strength, economical, durable, leak-free and weather, chemical, and burst resistant..
  • Backwash hose is standard 2 inch hose, flat 3.4’’ wide, fit 2’’ standard size filter outlet or cam lock / pin lug fittings, and fit 1.5’’ or less size schedule 40/80 PVC pipe. Be sure to measure your filter outlet to ensure proper fit before ordering..
  • The discharge hose is essential swimming pool supplies, works as pool drain hose, pool pump hose, filter waste hose, also works for agricultural water discharge, irrigation, landscaping, construction dewatering and submersible pumping..
  • The pool hose is made to fit standard connections to backwash pool filtration systems , and you can easily install it with clamp. After use, just roll it up and hardly take up any space, and then store it in a dry place for next use, away from direct sunlight..
  • Unlike traditional paper-thin single layer pool backwash hose, it can be used multiple times and withstand rough handling. If you want a drain hose that will last, this is what you are looking for!.
Check Stock

6x5.5 Wheel Spacers for 4 Runner Tacoma 6 Lug 1.5 in 6x139.7mm Forged Wheel Spacers 106mm Hubcentric with 12x1.5 ET Lug Nuts Blue

  • 6x5.5 Wheel Spacrs Spec: 4 PCS 1.5 inch Thickness per spacer, 6x5.5 Bolt Pattern, Hubcentric Core: 106 mm, 12x1.5 Extended Shank Lug nuts, Blue.
  • 6x5.5 Wheel Spacer Fitment: compatible with 1996-2019 4 Runner, 2007-2019 FJ Cruiser, , 2001-2007 Sequoia, 1993-1998 T100, 1995-2019 Tacoma 6 Lug....
  • Benefit of Extended(ET) Lug Nuts: Come with 24 pcs ET Style Lug Nuts, These lug nuts have the same 60° conical seat plus a small 0.300" long shank....
  • Benefit of wheel spacers: Imporve Better Handling and Increases the Traction,Solves the Adjustment Problems, Fixes Incorrect Offset and Give you the....
  • Warranty: We provide 1 year warranty. Easy Bolt-on Installation, No special Tool Needed.
Check Stock

CURT 45821 Clevis Pin Hitch Ball Mount, Fits 2-Inch Receiver, 6,000 lbs, 1-Inch Hole

  • HIGHLY VERSATILE. This clevis pin trailer hitch ball mount equips your vehicle with two towing options: a strong clevis pin for straight-line towing applications, or the clevis pin can be removed and a trailer ball bolted on for towing a trailer.
  • DEPENDABLE STRENGTH. This ball hitch is constructed from high-strength steel and rated to tow up to 6,000 pounds gross trailer weight and 600 pounds tongue weight (limited to lowest-rated towing component).
  • READY TO TOW. Hitching up your trailer is easy with this 2-inch ball mount. It has a 2-inch x 2-inch shank to fit virtually any industry-standard 2-inch receiver.
  • CORROSION-RESISTANT. For long-lasting use, this ball hitch is protected with a durable black powder coat finish, easily resisting damage from rain, dirt, snow, road salt and other corrosive threats.
  • EASY TO INSTALL. To install this clevis pin hitch ball mount on your vehicle, simply insert the shank into your vehicle's 2-inch hitch receiver. The rounded shank makes installation easy. Then, secure the shank with a hitch pin (sold separately).
Check Stock

MIKKUPPA 24pcs M12X1.5 Extended Lug Nuts - Black Extended Thread Lug Nut (ET) - 3/4'(19mm) Hex, 1.57' (40mm) Tall, 0.79' (20mm) Wide, Replacement for Toyota Tacoma 4Runner Lexus

  • ✔ Extended Thread (ET) Lug Nuts: Professionally designed aftermarket wheel lug nuts with 12x1.5 thread pitch, 1.57" (40mm) tall & 0.79" (20mm) wide, 7.62mm shank length, 15.75mm shank wide, conical 60 degree seat. They will NOT fit on factory OEM wheels.
  • ✔ 24PCS Lug Nuts: You will receive 20 black lug nuts with 1 socket key, in the 1 shockproof box that is portable for easy storage. Is the best choice for modified vehicles..
  • ✔ Lug Nuts Fitment: Before ordering, please check the size of the nuts on the wheels. Our lug nuts only replacement for vehicles with wheel studs requiring M12x1.5 thread and wheels with tuner style 60 degree seats..
  • ✔ Chrome Plating Lug Nuts: Made of high-quality cold-forged steel and heat-treated to make it stronger and more durable, meeting or exceeding OEM standards. Electrophoretic painting can extend the anti-rust time, and the outer paint will never fall off easily..
  • ✔ High Quality Lug Nuts: The one-piece structure design is more splendid and safer than the two-piece design. Our high-quality nuts are made of chromium and are heat treated to prevent cracking. They have undergone extensive on-board testing before being sold to ensure proper fit and long-lasting performance..
Check Stock

Fire Hydrant Adapter, 2-1/2\ NST (NH) Female x 2\ NPT Male Brass Fire Hose Hydrant Adapter with Pin Lug Fire Equipment Fitting Nipple for Fire Hydrants, Hoses, Pipes

  • 【Size】Brass fire hydrant adapters with 2-1/2" National Standard Thread (NST) female on one end for connecting to the hydrant and a 2’’ NPT male on the other end for connecting to a hose. Perfect for attaching to fire hydrant..
  • 【Material】Brass fire hydrant fitting is made of brass for corrosion resistance, ductility at high temperature and low magnetic permeability, they are more heat-resistant than aluminum rigid fire hose and hydrant adapters..
  • 【Easy Operation】Brass fire hose adapter with pin type lugs for quick connect and disconnect, easy to use. These fittings will not rotate as a hose is moved, making them less likely to loosen or break than swivel adapters..
  • 【Application】Brass fire adapter fittings used for connecting fire hose, pvc pipe and other low pressure pipes in the fire brigade, industry, refinery, building industry, agriculture, shipping, military and civil protection..
  • 【Quality Warranty】We did 100% inspection before these brass fire hydrant adapter leave our factory, if you have any problem with these products after you receive them, please feel free to contact us, we will give you a solution..
Check Stock

EZISOE 6x5.5 Wheel Spacers 4Runner Tacoma 6Lug, 2 in 6x139.7mm Forged Wheel Spacers 108mm Hub Bore with 12x1.5 ET Lug Nuts

  • 6×5.5 Wheel Spacrs Spec: 4 PCS 2 inch Thickness per spacer, 6×5.5 Bolt Pattern, Hub Bore: 108 mm, 12×1.5 Extended(ET) Shank Lug nuts. Because of the problem of Amazon unpacking, if you only receive 2pcs, please contact us and we will reissue one set for you.
  • 6×5.5 Wheel Spacer Fitment: compatible with 1996-2022 4Runner, 2007-2020 FJ Cruiser, 2001-2007 Sequoia, 2001-2022 Tacoma(Only 6 Lug vehicle), 2000-2006 Tundra, 2004-2012 Colorado, 2004-2012 Canyon, 2008-2014 Censor, 1994-2003 Passport, 2006-2010 H3.
  • Benefit of Extended(ET) Lug Nuts: Come with 24 pcs ET Style Lug Nuts, These lug nuts have the same 60° conical seat plus a small 0.300″ long shank that will fit into most Toyota wheels or Aftermarket. This equates to about 6 additional full turns of thread engagement, which will usually allow for safe installation of the wheels.
  • Benefit of wheel spacers: Imporve Better Handling and Increases the Traction,Solves the Adjustment Problems, Fixes Incorrect Offset and Give you the Aggressive Outlook.
  • Warranty: We provide 1 year warranty. Easy Bolt-on Installation, No specical Tool Needed.
Check Stock

DPAccessories LCE3L6HCSCH04020 20 Chrome 12x1.5 Closed End ET Spline Tuner Lug Nuts for Aftermarket Wheels Wheel Lug Nut

  • BEFORE YOU BUY: Extended Thread (ET) lug nuts are a special style lug nut intended for installation on aftermarket wheels only. They WILL NOT fit on factory OEM wheels. Verify fitment with our team before making your purchase..
  • WILL NOT FIT: Factory OEM wheels or wheels made by the vehicle manufacturer. Not to be used with most wheel spacers..
  • SPECS: M12x1.50 thread – Closed End ET Spline Tuner Style Lug Nuts – Conical 60 Degree Seat – 39.88mm long – 20.07mm wide – 7.62mm shank length – 15.75mm shank width.
  • REQUIRES: 19mm and 13/16 in. (21mm) hex spline tool/key part # D5210K for installation and removal. One (1) tool included with this set..
  • INCLUDES: 20 Chrome Closed End ET Spline Tuner Lug Nuts and one (1) spline tool/key for installation. Shipped in our signature premium packaging..
Check Stock

DPAccessories 20 Black 14x1.5B Spline Tuner Lug Bolts for Aftermarket Wheels - 27mm Shank BS27K5HE-BK04020

  • FITS: Aftermarket wheels requiring a lug bolt with a conical 60 degree seat, 27mm shank, and small diameter like spline drive or tuner style bolts..
  • WILL NOT FIT: Factory OEM wheels or wheels made by the vehicle manufacturer..
  • SPECS: M14x1.50B thread - Spline Tuner Style Lug Bolts - Conical 60 Degree Seat - 53.34mm long - 20.07mm wide - 27mm shank length.
  • REQUIRES: 17mm and 19mm hex spline tool/key part # BS-K-HC-CH04001 for installation and removal. One (1) tool included with this set..
  • INCLUDES: 20 Black Spline Tuner Lug Bolts and one (1) spline tool/key for installation. Shipped in our signature premium packaging..
Check Stock

Maverik TACTIK 2.0 Lacrosse Head UNSTRUNG - White

  • Easily Mounts To Your Atv Or Utv Hitch Receiver To Provide A Hitch Ball, Winch Strap Loop And ⅝" Pin Hole For Yard Work Equipment, Utility Trailers....
  • Multi-Hitch Includes A 2-Inch Ball, 2" Shank, ⅝" Pin Hole, 5/8" Hitch Pin And A Bridge Pin.
  • The Hitch Ball Has A 2-Inch Rise To Give Sufficient Ground Clearance In Most Applications.
  • Constructed Of Durable, Powder-Coated Steel.
Check Stock

Dixon Valve HA2576 Brass Fire Equipment, Hydrant Adapter with Pin Lug, 2-1/2\ NST (NH) Female x 3/4\ GHT Male

  • Adapter for connecting hoses, pipes, or fittings of different types.
  • 2-1/2" NST female on one end and 3/4" GHT male on the other for connecting to hose.
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
  • Chrome plated for strength and durability.
Check Stock

TOPTOW Trailer Hitch Extender Adapter with 6-inch Riser/Drop, 2" Receiver, 2-inch Solid Shank, 10000lbs Capacity, Anti-Rattle Bolt

  • ★Please check the product dimension before purchase. Extender length: 7" or 9". The 2" shank has two pin holes. ★RECEIVER SIZE: This trailer hitch extension riser has 2 inch by 2 inch industry-standard receiver, fits for most 2-inch shank of ball mounts and hitch accessories. ★ Please tightening the anti-rattle bolt after inserting into the 2 inch shank into the receiver. Recommend to use anti-rattle hitch pin or hitch lock for bike racks or cargo carriers..
  • ★HITCH RISER OR DROP HITCH: 6.25 inch drop or rise can be turned up or down to level the towing system..
  • ★ADJUSTABLE LENGTH: 2 pin holes design makes this drop trailer hitch have 2 active length and avoid interfere with the vehicle bumper.
  • ★SOLID RECEIVER SHANK: Gross Towing Weight: 10,000 lbs. Tongue Weight: 400 lbs. Heavy duty for towing trailer, boat, camper, bike rack, cargo carrier and other tow hitches.
  • ★CORROSION RESISTANT: Made of strong steel with a durable black powder coat finish, super corrosion resistant.
Check Stock