Top Pipe Center Finder

Stud Finder Wall Scanner, ENGiNDOT 5 in 1 Electronic Stud Sensor Detect Center and Edge of Stud with Wire Alarm, Depth Tracker, Unit Change, 3 Signal Lights, for Wood Beam Joist Metal Stud Detection

  • Accurate and Quick Stud Finder - The ENGiNDOT stud finder can detect 4 materials include wood, ferrous metals, non-ferrous metals, and AC wires. This wall scanner has 2 wood scan modes with the upgraded smart chip that can precisely locate the center and edge of the wood stud. The exact wood scan is up to 0.75 in.(20mm) deep, the deep wood scan can through 2 layers of drywall up to1.5 in.(38mm) thick..
  • Wire Warning & Metal Detection up to 100MM - Electrical wire detection is up to 2 in.(50mm) depth. No matter what detection mode it is in, AC live wire scan always working on. The ferrous metal scan is up to 3.15 in.(80mm) deep, the non-ferrous metal scan is up to 4 in.(100mm) deeper than normal, so you won't worry about drilling or hammering into a live wire, metal pipes, and cables..
  • Automatic Calibration & 3 Signal Lights- Saving your effort the stud scanner calibrates automatically without pressing the button manually all the time. Signal Lights show green when the detector calibration is ready and changes from yellow to red as you approach the center of the detected object. Easy to read and use with a large LCD screen..
  • Works on Wallpaper & Fabric too - The stud finder is not just suitable for drywall. It also scans through the surfaces covered in wa....
Check Stock

FJL FORCE Lathe Tools Set of 4, Qucik Replacement Wood Lathe Tools of Solid Aluminum Bar Handle Carbide Lathe Tools, Carbide Turning Tools, Wood Turning Tools for Woodworker-Brilliant Red

  • This center finder is perfect for laying out bowls, trays and platters.
  • Finding the center of irregular shapes to optimize yield is simple and easy.
  • Made from clear, fully transparent acrylic with a center hole and clearly marked circles in 5mm increments.
  • The circle center finder tool helps produce maximum yield on logs smaller than 300mm in diameter.
  • The lathe center finder works on wood, poster board, plastic, metal, glass, composites and more! Center Finder Compass is perfect for wood turners, arts,crafts, school projects, rough and finish carpenters or use it anywhere you need to draw a circle.
Check Stock

CRAFTSMAN Stud Finder, 3-Inch Depth, AC Detection (CMHT77623)

  • CENTER STUD DETECTION: The stud finder detects center of stud for accurate results.
  • 1-1/2-inch RANGE: The stud finder wall scanner detects wood and metal studs up to 1-1/2-inch deep (Metal up to 2-inch).
  • ACCURACY: The wood/metal stud finder has auto calibration for consistent readings.
  • STUD LOCATION REMINDER: Center marking pin provides a visual reminder of stud location.
  • EASE OF USE: LED arrows and audible notifications of stud location.
  • Powered by two AAA alkaline batteries (not included).
Check Stock

Round BAR Center Finder 3/8\ Shank Tool for MILLING Machine

  • Round bar center finder 3/8" shank tool for milling machine.
  • Quickly and accurately locate the center of round stock for drilling or milling with this center finder.
  • Put shaft in drill chuck or collet center and center is located when pointer aligns with line on short shaft..
  • Made from stainless steel with zero-glare satin chrome finish.
Check Stock

Beam Finder Wall Scanner - Upgraded 5 In 1 Wall Stud Finder Detector Quickly Locates Wood, Metal, Studs, Pipes, Rebar, Joists, Live AC Wires - Large Clear LCD Display That's Easily Readable

  • We provide you with clear instructions, so you can put the stud finder right to work and avoid having your walls looking like Swiss cheese.
  • It Locates More Than Just Wall Studs: Our professional wood stud finder comes equipped with 5 scanning modes – ½ inch, 1 inch and 1.5 inch scanning modes locate the center and edges of wood and metal studs.
  • Metal Mode: steel pipes, rebar, copper bits and joists.
  • AC scanning mode detects live, unshielded electrical wiring up to 2 inches deep.
  • For Commercial Use & Many DIY Projects: Use or stud finders and pipe locators to hang pictures, art, shelves, or cabinets, mount a flat screen TV, and other home renovation projects on the walls or ceiling.
  • The built in, automatic calibration provides unmatched reliability and accuracy every time.
  • Premium Tools That Are Built To Last: Giant Viking tools are known for their affordability, quality and reliability. So reliable, that we back this Wall Stud Finder with a 3-year-replacement-warranty. If it lets you down, we’ll replace it. No questions asked..
Check Stock

Bosch D-tect 120 Wallscanner Professional Wall and Floor Detection Scanner The Intuitive Radar Scanner for All Materials

  • Radar Technology: The stud finder uses Bosch-patented radar technology to detect all object types, including live and non-live cables, water-filled plastic pipes, and magnetic and non-magnetic metal.
  • Spot View: Delivers immediate results even when there is little or no space to move the wire detector to scan the wall.
  • Three detection settings: Choose from one of three detection settings depending on wall type - drywall, concrete or universal mode if the material is unknown.
  • Center Finder: Arrows and a signal strength indicator guide users toward the object.
  • the center finder indicator shows when the joist finder has located the object’s center.
  • Dual Power Source: For added flexibility, the stud detector can be used with either a 12 V Li-ion battery or standard AA batteries using the battery adapter.
Check Stock

EZ Center Finder | Scriber Tool for Woodworking | Find and Mark Exact Center on Any Size Board | 4-Piece Set Includes Bonus Edge Guide.

  • SMALL Center Finder is perfect for marking pilot hole locations on the edge of a board or trim molding..
  • MEDIUM Center Finder is perfect for marking 1x3s, 1x4s, and 2x4s..
  • LARGE Center Finder tackles the larger size boards like 1x6s, 2x6s, and 1x8s..
  • BONUS Edge Guide helps you mark pilot hole locations for joining ¾” boards..
Check Stock

POWERTEC 71080 Plastic Center Finder – Wood Turner Tools Series

  • FUNCTION: Provides you with a quick, easy and accurate method of finding the center on a piece of wood stock.
  • VERSATILE: Used by professional woodworkers and DIY enthusiast to find the exact center of any round, square, or octagonal wood piece (up to 8”) or hexagonal wood pieces (up to 5-3/4”).
  • QUALITY: Manufactured with a premium, lightweight design that features impact-resistant plastic for long-term durability – plus this center finder woodworking tool possesses a colored, semitransparent profile for optimal visibility.
  • EASY TO USE: To find the center, simply place tool on corner, mark a line, rotate it 90 degrees and mark a second line.
Check Stock

POWERTEC 71421 10' Round Center Finder Compass (Tool) for Wood Turning Lathe Work – Clear Acrylic

  • INCLUDES: (1) Circle Center Finder Tool (10 inches).
  • FUNCTION: A quick and easy solution to finding the center of irregular shapes, drawing circles and perfect for laying out wood for bowls, platters, trays and more.
  • FEATURES: Marks circles up to 10 inches in 1/2 inch increments with 18 accurately cut 1/8”diameter holes, and 1 center disc hole.
  • EASY TO USE: Simply tap a small nail or pin through the center hole, insert a pencil in your choice of diameter hole, and pivot around the center point to make your circle mark.
  • PREMIUM DESIGN: Made from clear acrylic, these center finder woodworking tools possess a truly transparent profile and contain sharply laid out markings and visual aids along the disc.
Check Stock

Astromania Universal Dovetail Base for Finder Scope - Ideal for Installation of Finder Scope, Green Laser Pointer Bracket

  • Fits factory drilled holes on Celestron, Meade, and Orion Schmidt-Cassegrain telescopes, attaches directly to Schmidt-Cassegrain Telescope (SCT) optical tube with included mounting hardware..
  • Compliable with finder scope, Laser Pointer bracket or reflex sight bracket on telescopes, great for adding a second or third aiming device to your telescope..
  • Made of high strength Aluminum with Anodizing Aluminium Process. The base is made of die-cast metal and features two large thumbscrew locks. Includes two M5 screws..
  • Ideal for custom installation of any finder scope, EZ Finder reflex sight, and Green Laser Pointer bracket on any telescope. Dovetail base fits finder scope or reflex sight bracket so you can securely attach an aiming device to any telescope. Synta-style dovetail base -- Fit most bracket designs from Celestron, Orion, Sky-watcher, Vixen, etc. Compliable with finder scope, Laser Pointer bracket on telescopes..
  • Drilled (but not threaded) to accommodate screws up to 5mm in diameter. Center-to-center screw hole spacing on your telescope must be from 10.2 to 30.2mm in order for this dovetail base to be compatible..
Check Stock

UPTTHOW 10" Round Center Finder Compass Clear Acrylic for Drawing Circles on fabric, wood, poster board, plastic, metal, glass, composites also for irregularly shaped items, Measure Alignment Tool

  • ⁈[WHAT'S THE PROBLEM]: When you are trying to draw a circle on irregularly shaped or rough items, tough to keep the compass centered while making a clearly marked circle. The Round, Clear Acrylic Center Finder/Compass helps to provide a clear view of what you are doing and drawing holes with corresponding, clear index marks for drawing circles..
  • [EASY TO USE]:locate the spot that you want to center your circle from, use a push pin or brad nail in the center hole of the center finder/compass to hold it in place. Choose the diameter circle you would like to mark, then using a fine pointed pencil or scoring tool to mark your circle..
  • ⊙[FIND THE CENTER]: You can layout and draw circles from 1” to 10” in diameter. And 0-360 degree line for aligned.It works exceptionally well on irregularly shaped items like wooden logs.This also helps produce maximum yield on items smaller than 10” in diameter..
  • [ACRYLIC MATERIAL]:Made from clear, fully transparent acrylic with black marking makes this ideal for wood turners, arts, crafts, school projects, rough and finish carpenters or use it anywhere you need to draw a circle,wood, poster board, plastic, metal, glass, composites and more!.
  • ✍ [WIDE APPLICATIONS]:It is perfect for many different shop, job sit....
Check Stock

4 Inch Marking Center Finder Stainless Steel Center Scriber Marking Centerline Tool Woodworking Center Gauge Line Scriber Center Finder Ruler for Woodworker Carpenter

  • Use tip: it is recommended to use this center finder in conjunction with a 2B pencil, which is very suitable for determining the precise center of the....
  • Size detail: the steel scribe tool is measured about 5.7 x 0.2 x 0.07 inch, small and compact design is very suitable for finding the center of the....
  • Material: the center finder tool is made of stainless steel, which is sturdy, reliable, labor-saving, with high measurement accuracy, easy to operate,....
  • Designed for woodworking: woodworking center gauge slides very smoothly and protects your working fingers from burrs, suitable for woodworking work.
  • Apply to: the center marking tool can be applied to mark the center of a board whose thickness or width does not exceed 4 inch.
Check Stock