Top Pipe Clamp 4

ZEONHAK 4 Pack 3/4 Inches Pipe Clamp, Wood Gluing Pipe Clamp Set, Heavy Duty Woodworking Cast Iron Clamp for Metalworking, Woodworking and Frame Assembly, Red

  • MADE OF CAST IRON - This wood gluing pipe clamps are constructed of premium heavy duty cast iron, which is durable and sturdy. The surface of pipe clamp is finished by baking varnish, and the surface is smooth and shiny. The thread spindle is coated with black oxide..
  • ERGONOMIC DESIGN - Woodworking cast iron clamps with ergonomic handle makes clamping easier and reduces hand fatigue. The H-style base prevents the clamp from tipping out. Equipped with multiple steel sheets, the spring clamp clamping ability is stronger..
  • EASY TO USE - The wood gluing pipe clamp is easy to operate. Just slide the tail-stop onto the pipe at the other end. Then apply the coil-spring stop to the pipe threads at the tail-stop end of the pipe to prevent the tail-stop from sliding off the pipe during adjustment away from the work being clamped..
  • MULTI-PURPOSE - The quick release pipe clamp is multifunctional. It is often used in metalworking, woodworking and frame assembly, ranging from DIY to industrial production. Owning a pipe clamp can bring convenience and fun to your life..
  • 100% GUARANTEE - If our pipe clamp have any quality problems, you can request a full refund and return within 30 days after receiving the products. Quality and customer satisfaction are our top prioriti....
Check Stock

Bessey VAC-6 Angle Plates (6-Pack)

  • 【SIZE】- Fit Pipe Diameter: 14mm/ 0.55".
  • 【MATERIAL】- Made of 304 high-grade stainless steel. After punching, bending, and integral molding, the structure increases the rib structure to improve the strength of the pipe clamp. Fastened and durable.
  • 【APPLICATION】- Widely used in plumbing, petrochemical, power supply, and other pipeline laying, fixing all kinds of pipelines on wood, masonry, or similar surfaces.
  • 【USAGE】- Choose the corresponding inner height of the pipe clamp according to the OD of the pipe, determine the hole according to the hole dia and position of the pipe clamp, and lock the fastening screw. A layer of soft gasket can be placed on the inner side of the pipe clamp and the pipe fittings, the effect will be better.
  • 【PACKAGE CONTENT】- 20Pcs × Rigid Pipe Straps.
  • Note: Mounting screws are not included here.
Check Stock

100 PCS 3/4 Inch PEX Cinch Clamps, 304 Stainless Steel PEX Fitting Clamps Pinch Clamps Ring Crimp Rings for PEX Tubing Pipe Fitting Connections (Silver -3/4inch(100PCS))

  • ..., low cost solution to connect PEX tubing. Compatible with All PEX Brands Manufactured with American Certification..
  • ✔【360-DEGREE SEAL PROTECTION】These interlocking rings provide a fast and reliable connection of all PEX pipes fittings. Form a complete 360-Degree watertight seal. The 360-degree narrow stepless clamp concentrates seal compression, rest secure in any PEX pipe using the system..
  • ✔【SPECIAL DESIGN】Special design for all PEX pipe connection fittings, Interlock Rings with 360 Stepless Design. This stepless ear clamp conforms to the ASTM International F2098 standard for securing PEX tubing to insert fittings. Universal used in any brand of crimp PEX pipe fittings or tubing..
  • ✔【WIDE APPLICATION】Widely used in all plumbing systems, such as water heater, air condition system, pipeline system, hydronic heating system, electrical plumbing, etc. PEX barb fittings are compatible for potable water distribution and hydronic heating applications. Providing a strong and reliable crimp fitting application..
  • ✔【EASY INSTALLATION】Pex clamp rings slide the 3/4 in. clamp ring over the pipe, push the pipe onto the fitting and squeeze with your clamp tool to make a secure connection..
Check Stock

T-Bolt Hose Clamp Adjustable Stainless Steel Titanium Blue Clamp Diameter Ranger for 2.75\ inch（72-80mm）#4124

  • Size & Package: AN8, Included: 4 Pc x Hose Pipe Clamp.
  • Universal: Aluminum Hex AN4 clip pipe finisher, Fit for Braided Fuel Hoses / Vacuum Hose.
  • Fuel line clamp feature: anti-rust, anti-corrosion, waterproof, oil-proof. Pipe clamps are sturdy, strong and reliable.
  • Easy Installation: Design to Hex, better work with the wrench and looks more fashion and tidy appearance to your hoses with easy installation of a hose clamp.
Check Stock

TICONN 42PCS Cable Clamps Set - Rubber Cushioned 304 Stainless Steel Hose Clamps Loop Clamps Pipe Clamps in 6 Sizes (42PCS combo, 1/4'' 5/16'' 3/8'' 1/2'' 5/8'' 3/4'')

  • [PREMIUM QUALITY] – The metal clamps are made of 0.025'' thick premium 304 stainless steel and EPDM (Ethylene Propylene Diene Monomer) rubber cushion. The whole stainless wire clamp provides an excellent corrosion and rust resistances performance when used in harsh conditions. The working temperature of the clamp kit ranges from -4°F to 212 °F..
  • [WIDE APPLICATIONS] – The cushion reduces vibration and wear from clamp edges. The pipe holder clamp is ideal to hold pipes, hoses, cables, fuel lines close to the mounting surface in boat/marine, household, automotive, garden, heating and air conditioning. You can always find a proper metal clamp from TICONN that meet your needs in different applications..
  • [STAY ORGANIZED] – The cable clamp assortment come within a storage box for easy storage and assortment. The TICONN logo and clamp size is engraved on each small clamp which makes it fast to identify the right tube clamp for every application..
  • [SIZE AND QUANTITY] – The hose clamp assortment box contains 24PCS wire clamps that is 0.6in (15mm) wide and 0.025in (0.6mm) thick. The diameter of the screw hole is 1/4 in (6.4mm). The stainless steel clamps fit 1/4'' 5/16'' 3/8'' 1/2'' 5/8'' 3/4'' pipe/wire..
  • [TICONN BRAND QUALITY COMMITMENT] – We stand be....
Check Stock

CVS 50 PCS 3/4 Inch PEX Cinch Clamp Rings, Stainless Steel Pex Fittings Crimp Rings Pinch Clamps for PEX Tubing Pipe Fitting Connections (3/4 Inch)

  • HIGH QUALITY - Meet ASTM F2098 requirements. Made of 304 Premium Stainless steel material. Salt resistant, anti rust, anti-corrosion..
  • EASY INSTALLATION - Slide the 3/4 inch PEX cinch clamp ring over the pipe, push the pipe onto the fitting and squeeze with your clamp tool. Providing a strong, leak-free and reliable crimp fitting connection..
  • WIDELY USED - Conversancy Brand products’ quality and performance is field-proven. Special design for all PEX pipe connection fittings. Universal used in any brand of crimp PEX pipe fittings or tubing..
  • CERTIFIED - Meet the same standards for all commercial and residential plumbing applications - Hydronic heating system, air condition system, water heater, Telecommunications electrical plumbing, food pipeline system etc..
  • SIZE - 3/4 inch (23.3mm) PEX clamps, fit for 3/4 inch PEX pipe..
Check Stock

Peachtree Woodworking Supply 2 Pack of 4 Way Pressure Clamps For Clamping Panels - Using Pressure From All Four Directions. Ideal For Woodworkers and Cabinet and Furniture Makers

  • Clamping Panels Can Certainly Be A Challenge. Especially When We Try To Use Everyday Pipe Clamps Or Bar Clamps. While These Types Of Clamps Work Fairly Well On Certain Glue Up Projects, The One Thing They Don’T Do At All Is Apply Pressure From The Top And Bottom Of The Panels During Glue Up. In Fact, With All The Pressure Being Applied On Both Sides, Bar And Pipe Clamps Will Almost Certainly Bow, Buckle Or Rack Your Panel Glue Up Project.
  • Let’S Make Racked Panel Glue Ups A Thing Of The Past. With A Simple Turn Of The Rotating Clamp Handle, All Four Sides Of The Clamp Will Draw Inward At The Same Time.
  • Build Any Length Clamp With The Durable Plastic Bars With 4 Notches For Maximum Adjustability To Handle A Variety Of Stock Widths. Clamp Can Be Used For Boards Up To 6 Inches In Thickness By Simply Adjusting The Clamp Width Capacity With The Appropriate Number Of Notches. Turn The Handle Clockwise To Tighten The Clamp And Turn The Handle Counter Clockwise To Release Pressure. The 4 Way Pressure Clamp Is Equipped With Side Pressure Pads To Prevent Damaging Your Stock.
  • Now You Can Confidently Glue Up Wide Boards, Shelving, Table Tops, And More Up To 6” Thick. To Setup The Clamps Simply Attach The Clamp To Any Length 2 X 2’S (2” X 4” Ripped In Hal....
Check Stock

3 pcs 1/18" to 3-1/2" Exhaust Pipe Expander/Pipe Stretcher Kit/Muffler Pipe Expander/Tail Pipe Expander

  • ◇ Important : The previous product quality was not very good, we have asked the factory to improve the product quality, now the product quality is better than the previous one, please don't worry. If there is any quality problem, please contact us in time.
  • ◇ Features : This Tail Pipe Expander set includes three different expander sizes, can work to all 1-1/8inch to 3-1/2inch ID thin-wall pipes.
  • ◇ Funtion : The 3-Pieces Pipe Expander Spreader Tool Set is designed to quickly and easily straighten clamp dents and clamp marks in mufflers and tail pipes, and stretch pipe openings or fix damaged pipe ends. Can be use with a hand ratchet or breaker bar and also a hand wrenches.
  • ◇ Easy to use : Designed to quickly and easily straighten out clamp dents in mufflers .A simple wrench turn expands pipe for exhaust system repair and installation.
  • ◇ Contents: 1 X Small Expander: 1-1/8" to 1-3/4" 1 X Medium Expander: 1-1/2" to 2-1/2" 1 X Large Expander: 2-1/8" to 3-1/2" 6 X Extra O-Rings 1 X Blow Mold Storage Case.
Check Stock

TICONN 70PCS PEX Clinch Clamps Kit, 304 Stainless Steel PEX Clamp Rings for PEX Pipe Tubing Connection (70CPS Kit)

  • [PREMIUM QUALITY] – The PEX fittings Clamp are made of thick premium 304 stainless steel with smooth edge. The ring clamp will seal the pipe 360° tightly. The stainless PEX rings provide excellent corrosion and rust resistances when used in harsh conditions..
  • [SIZE RANGE AND QUANTITY] – The PEX kit contains 70 pcs PEX pipe clamps include 12 pcs 3/8'', 20 pcs 1/2'', 12 pcs 5/8'', 20 pcs 3/4'' and 6 pcs 1'' PEX rings..
  • [WIDE APPLICATIONS] – The PEX pipe clamp can be used to secure PEX tubing with PEX crimping tool for home plumbing, garden, hydronic heating and air conditioning system. This clamp set contains vary diameters that meet your needs for different applications..
  • [STAY ORGANIZED] – The PEX tool kit assortment come within a storage box, easy to store and carry. The size range is engraved on each PEX clamps which makes it easy to identify the right size of the tube clamp..
  • [TICONN BRAND QUALITY COMMITMENT] – We stand behind the quality of our products. If for any reason you are not satisfied with your purchase, please contact us. We provide 30-day money back and 12-month warranty. 100% Satisfaction Guarantee for risk-free shopping!.
Check Stock

Eastman 1 Inch IPS Pipe Repair Clamp, 3 Inch Length, Stainless Steel, 45185

  • PIPE REPAIR CLAMP: Pipe repair clamp tool is designed for use on steel, copper, and plastic pipes, and is perfect for providing repairs to the pipes which suffered puncture, pinhole, or split.
  • creates a positive seal that won't collapse on Schedule 40 PVC.
  • DURABLE: Pipe clamps are crafted from strong and sturdy 301 stainless steel for long-lasting reliability.
  • WHAT IS INCLUDED: Metal pipe clamp is equipped with a high quality rubber gasket that will not deteriorate, and includes galvanized iron lugs which protect against rust and corrosion.
  • SPECS: Pipe fitting clamp features a 1 Inch IPS connection, and can withstand temperatures of 20 degrees F to 180 degrees F.
  • PREFERRED BY THE PRO: Our tools and plumbing supplies are perfect for both home owners and professional contractors.
Check Stock

White Clamps Farm Plastic Clamps Greenhouse Film Clamps Grip White Clamp PVC Pipe Plastic Clamps for Greenhouse Plant Supplies (40 Pieces,3/4 Inch)

  • Fits 3/4 inch PVC pipe: each white clamp measures approx. 8 cm/ 3.14 inches in length, 1.9 cm/ 0.75 inch in diameter, it works on 3/4 inch PVC pipe, and it will work for pipes with a little larger or smaller diameter too, please confirm the pipe diameter before purchasing.
  • Reliable to use: these farm plastic clamps are made of PVC plastic, the material has strong plastic structure and temperature resistant, so they are durable and sturdy to use, featuring with strong fixed function and not easy to break, so you can use them for long time.
  • Practical application: this PVC pipe plastic clamp is suitable for greenhouse film, net to pipe, quilting frames and more, it is also an ideal choice for building greenhouse, floor covering or other places if needed, so practical in our daily life.
  • Convenient to use: you can use these plastic clamps to the pipe, they hold the plastic on the pipe tightly, without damaging or breaking, and you can use these plastic clamps to build your greenhouse easily.
  • What you get: you will receive 40 pieces white clamps in the package, with white colors and proper size, sufficient quantity is enough for your daily use and replacement, and you can share them with your friends or neighbors.
Check Stock

25 Pack Stainless Steel Hose Clamps, 1/4 inch to 1/2 inch Worm Gear Metal Hose Clamps for Pipe, Dryer Repair, Tubing and Fuel Line

  • Adjustable hose clamps are high torque, adjustable from 1/4 - 1/2 inch (6-12mm), ideal as 1/4 inch pipe clamps, 3/8 inch tube clamps, 1/2 inch screw clamps, etc..
  • Metal clamps are all premium 304 stainless steel to provide maximum corrosion resistance to salt and most chemicals, the worm drive hose clamps comply with SAE standards, when installing on the pipe, you will no longer worry about them rusting and breaking..
  • Pipe clamp for a variety of applications for marine, auto, water pipes, fuel lines, dryer, vent, radiator, etc. to meet your needs in different applications..
  • Easy to install, use a screwdriver to tighten or loosen the screw of hose clips then adjust the size, Secures pipe clamp tightly in place..
  • You will receive 25 pieces of 1/2 to 1/4 inch hose clamps and if for any reason you are not satisfied with your purchase, please contact us for a lifetime refund or exchange!.
Check Stock