Top Pipe Clamp Fittings

IWISS F2098 Ratchet One Hand PEX Cinch Clamp Fastening Tools for Clamping Pipe Tubing 3/8 1/2 3/4 5/8 and 1 Easy Operation Stainless Steel Clamps with Holster

  • Purpose: BJ0010C PEX cinch tool is designed for the creating secure stainless steel pinch clamp connections in combination with PEX barb fittings....
  • One Hand Operation: One-handed gripping keeping the other hand free to hold a flashlight, ladder or pipe..
  • Secure Connection: The clamp tool will not release from the clamp ring unless a properly-secured connection has been made. The tool is factory....
  • Applications: Ideal for use in tight spaces such as manifold installations, under closet potable water plumbing..
Check Stock

SharkBite 24947 Plumbing Straight Stop, Metal 1/2' x 1/2'

  • PEX CLAMP TOOL: Time and cost savings in combination with SharkBite PEX Stainless Steel 3/8 inch, 1/2 inch, 5/8 inch, 3/4 inch, 1 inch Stainless Steel Clamp Rings.
  • FAST: No waiting for glue to dry or joints to cool.
  • USE: Works in conjunction with PEX Stainless Steel Clamp Rings, PEX Barb Fittings and PEX Pipe Tubing.
  • ASSURANCE: PEX Clamp Tool will not release until a secure connection is made removing the need to check each fitting with a go/no go gauge.
  • RESIDENTIAL and COMMERCIAL: All SharkBite products meet the same standards for commercial and residential plumbing applications.
Check Stock

Class A Customs | Under Mount 30 Gallon RV Concession Fresh and Gray Water Holding Tank & Plumbing Kit | UM-3000-BPK

  • 30 Gallon Fresh or Gray Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe - Can be used for Fresh or Gray Water Storage.
  • WATER TANK MEASUREMENTS: 48” Longest Length (not including fittings) x 8.5” x 20.5” - Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement).
  • TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and water-tight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT Over-tighten fitting damage will occur – Use plastic threaded fittings, metal threads may damage tank fittings.
  • NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
  • BASIC PLUMBING KIT INCLUDES: (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adaptor (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adaptor (TWO) 1.5” Hose Clamps (ONE) 1.5”....
Check Stock

Spears 1429 Series PVC Tube Fitting Coupling Schedule 40 Gray 1-1/2 x 1 Barbed

  • Fitting connects to schedule 40 PE pipe on both ends.
  • PVC for strength and resistance to reactions with acids, gasoline, alcohol, and hydrocarbons.
  • Barbed fitting creates a tight seal on flexible pipe when used with a hose clamp (sold separately).
  • Meets ASTM D 2609 standards for plastic insert fittings and certified by NSF for use with potable water.
Check Stock

Spears 1429 Series PVC Tube Fitting Coupling Schedule 40 Gray 3/4 x 1/2 Barbed

  • Fitting connects to schedule 40 PE pipe on both ends.
  • PVC for strength and resistance to reactions with acids, gasoline, alcohol, and hydrocarbons.
  • Barbed fitting creates a tight seal on flexible pipe when used with a hose clamp (sold separately).
  • Meets ASTM D 2609 standards for plastic insert fittings and certified by NSF for use with potable water.
Check Stock

uxcell 10 Pcs 45mm Diameter Double Wire Grip Cable Tight Pond Pump Hose Pipe Clip Bolt Clamp

  • 【Widely Application】This hose clamps set total include 68pcs 8 size black double gripping hose clamps, Perfectly used for air hose, water pipe, automotive fuel line, silicone hose, etc. which are edges smooth will not hurt the pipe, perfect for various silicone/ vinyl tube/ hydrofarm hose fittings..
Check Stock

SharkBite U860O300 Oxygen Barrier PEX Pipe 1/2 Inch, Orange Heat Radi, 300 foot coil

  • PEX RADIANT TUBING: Flexible oxygen barrier pipe tubing for radiant floor and hydronic heating applications.
  • Minimum working temperature 33 degrees Fahrenheit at 160 PSI and maximum working temperature 200 degrees Fahrenheit at 80 PSI.
  • FLEXIBLE PEX PIPE: Expands and contracts with temperature changes and is freeze resistant.
  • PUSH-TO-CONNECT: Use with SharkBite plumbing fittings or plastic barb and brass barb fittings using PEX crimp tool or clamp connections.
  • RESIDENTIAL and COMMERCIAL: All SharkBite PEX tubing meets the same standards for commercial and residential plumbing applications.
  • MADE IN THE USA: Manufactured and tested in the USA.
Check Stock

Class A Customs | T-1000-BPK| 10 Gallon Fresh Water Tank & Plumbing Kit RV Concession

  • 10 Gallon Fresh or Gray Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe - Can be used for Fresh or Gray Water Storage.
  • WATER TANK MEASUREMENTS: 19” Longest Length (not including fittings) x 9” x 14” - Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement).
  • TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and watertight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT over-tighten fitting damage will occur, use plastic connecting fittings as metal will damage threads..
  • NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
  • BASIC PLUMBING KIT INCLUDES - (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adaptor (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adaptor (TWO) 1.5” Hose Clamps (ONE) 1.5” Male Pipe Thre....
Check Stock

Class A Customs | T-2100-BPK| 21 Gallon Fresh Water Tank & Plumbing Kit RV Concession

  • 21 Gallon Fresh or Gray Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe - Can be used for Fresh or Gray Water Storage.
  • WATER TANK MEASUREMENTS: 34” Longest Length (not including fittings) x 9” x 16” - Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement).
  • TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and watertight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT over-tighten fitting damage will occur, use plastic connecting fittings as metal will damage threads..
  • NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
  • BASIC PLUMBING KIT INCLUDES - (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adaptor (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adaptor (TWO) 1.5” Hose Clamps (ONE) 1.5” Male Pipe Thre....
Check Stock

PEROMI 170 Pcs Single Ear Hose Clamp 11 Sizes 1/4-1 Inch Stepless Stepless Cinch Rings Crimp Assortment Kit for Water Pipe Plumbing and Automotive Use

  • [Include Size]This fuel line clamp kit set comes with 7 common sizes: 6-7mm, 7-8.7mm, 8.8-10.5mm, 9.6-11.3mm,9.8-12.3mm, 12-14.5mm, 13.7-16.2mm,15.3-18.5mm, 17.8-21mm, 20.3-23.5mm, 22.4-25.6mm,all size of tube clamp packed in a sturdy convenient case, can be used for a storage box..
  • [Premium Quality] High precision single ear stepless hose clamps are Made of 304 Stainless Steel, has good corrosion resistance, heat resistance, low temperature strength and mechanical properties, a good choice for long-term use.Hose clamps are used to seal various types of hoses..
  • [Leak-Proof] These interlocking rings provide a fast and reliable connection of all PEX pipes fittings. Form a complete 360-Degree watertight seal. Great secure in any PEX pipe using..
  • [Easy to Use] The slide the clamp ring onto the pipe, push the pipe onto the fitting and squeeze it with a clamp tool. Provide a firm, leak-free and reliable crimp joint connection..
  • [Application] Widely applications in all plumbing system - Hydronic heating system, air condition system, water heater, Telecommunications electrical plumbing, food pipeline system etc. Providing a strong and reliable crimp fitting application..
Check Stock

Class A Customs | T-4000-BPK| 40 Gallon Fresh Water Tank & Plumbing Kit RV Concession

  • 40 Gallon Fresh or Gray Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe - Can be used for Fresh or Gray Water Storage.
  • WATER TANK MEASUREMENTS: 39 1/2” Longest Length (not including fittings) x 13” x 18” - Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement).
  • TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and watertight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT over-tighten fitting damage will occur, use plastic connecting fittings as metal will damage threads..
  • NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
  • BASIC PLUMBING KIT INCLUDES - (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adaptor (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adaptor (TWO) 1.5” Hose Clamps (ONE) 1.5” Male Pipe....
Check Stock

Class A Customs | T-3000-BPK| 30 Gallon Fresh Water Tank & Plumbing Kit RV Concession

  • 30 Gallon Fresh or Gray Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe - Can be used for Fresh or Gray Water Storage.
  • WATER TANK MEASUREMENTS: 34 1/2” Longest Length (not including fittings) x 12” x 17 1/2” - Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement).
  • TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and watertight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT over-tighten fitting damage will occur, use plastic connecting fittings as metal will damage threads..
  • NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
  • BASIC PLUMBING KIT INCLUDES - (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adaptor (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adaptor (TWO) 1.5” Hose Clamps (ONE) 1.5” Male ....
Check Stock