Top Pipe Corrosion

220V 240V 3KW Electric Pool Water Heater for Above Ground Inground Pool,Upgrade Portable SPA Water Bath Heater Thermostat Swimming Pool Thermostat Heater Pump

  • Must Work with At Least 0.75HP Circulating Pump.Material: Metal.
  • NOTE:One interface is 50mm, the other port is 32mm, please note the size of the pipe before use..
  • Heating fit for thermostat liner material is 316 # stainless steel pipe and electric resistance,corrosion resistance (chlorine corrosion)，and durable.
  • The product is easy to operate, provides a mechanical fit for thermostat switch, you can set the temperature of temperature technology.
  • The product is small, suitable for: hot tub & swimming pool equipment and it is easy to install in the bathtub at the bottom of the circulating massage pipe.
Check Stock

OhLectric OL-38707 High-Conductivity Ground Pipe Clamp - Made of Copper Alloy - Connecting Grounding Electrodes to Water Pipes Clamp - Non-Direct Burial Pipe Clamp - ½ Inch - 1 inch Pipe Range

  • ...maximum flexibility to suit your needs!.
  • MULTIPURPOSE: These pipe ground clamps are an excellent choice for either clamping the pipes to the grounding electrode or you can even use these clamps to securely mount the pipes on walls. It can also be used for connecting bare wires to pipes or steel water pipe or tubing..
  • CORROSION FREE: The ground clamp for pipe can be attached to the grounding electrode and the pipe by the means of indirect burial with the screws provided. To prevent rusting, the screws are coated with zinc plated steel alloys which totally eliminates the chances of corrosion on the clamps..
  • SAFETY TESTED: All our products are certified by Culus for their safety and specification standards set by them. We follow every step to ensure all the housing rules and regulations are followed as we value customer satisfaction and safety more than anything else..
  • ADAPTABLE FIT: These pipe grounding clamps come in a variety of sizes which are well equipped for all wire ranges between 2-10. And also they support all pipe sizes from the smallest ½ inch to 1 inch. The screw thread on the clamps also varies in size so you can select the clamp depending on your needs!..
Check Stock

Heidolph Temperature Sensor for Laborota 4003 Series Control Rotary Evaporator

  • Main structural parts made of corrosion-resisting Stainless steel, Long Using Life-span..
  • Transparent protective cover, heat preservation, saving energy, burst-proof, splash-proof, antirust, antiseptic..
  • Vertical condenser with feed-in pipe, big condensing pipe, big evaporating pipe, evaporating rate is more superior than rank instruments..
  • Evaporator is used for concentration, crystallization, separating and recovery biochemistry, organic chemistry, medical and experiment & scientific research of institutes and universities..
Check Stock

Exhaust Muffler 1.5-2"Inlet Removable DB Killer for Street/Sport Motorcycles and Scooters with Diameter Exhaust Pipes Slip On (Type 7)

  • ...odels(only fit for right side). Some large-displacement cars such as for Yamaha, for Honda and for Kawasaki need to be used in combination with the exhaust mid-pipe..
  • Stainless Steel Material --- Our motorcycle exhaust Pipe is made of high quality stainless steel, durable, corrosion resistance and rustproof, not easy to deform, not easy to damage, rust and corrosion resistance, durable..
  • Different Colors --- Stainless Steel Exhaust Pipe Tip is a great aftermarket replacement for your old or broken one.Our products have three colors for your option.Different colors can meet the needs of your different occasions and better meet the needs of different groups..
  • Simple Installation --- Exquisite workmanship, shiny bright and cool colors. Protect the original exhaust pipe from sun and rain, avoid rusting and deformation. There is no need to replace any parts, just fix the screw to the appropriate location of tailpipe by wrench.(Note: If the diameter model is not between 38-51MM, simple welding is required).
Check Stock

C4818 2 MIPT PLUG PVC

  • Plug for closing the end of a pipe or fitting.
  • Male National Pipe Taper (NPT) threads for connecting to a female threaded pipe.
  • PVC-DWV for corrosion resistance, high strength, and less weight than fittings made from metal.
  • Smooth interior finish for reduced friction and material buildup.
  • Meets specifications ASTM D2665 and D3311 for quality assurance.
Check Stock

OhLectric OL-43183 Two Hole Rigid Pipe Strap - Sturdy Steel Strap clamps - Zinc Plated Steel - Reinforced Rib - Corrosion Resistant - Easy To Install - 1 Inch (Pack of 25)

  • ...or industrial usage. The Reinforced Hole on this strap gives more strengthening support to the pipings..
  • GREAT RESISTANCE: Iron straps easily get rust when used on the plumbing pipes. To avoid this we have made this strap from zinc-plated steel which is highly resistant to corrosion. Highly corrosion resisting property of this rigid pipe strap makes it an ideal accessory for outdoor applications..
  • EASY TO INSTALL: You can easily fix this two-hole rigid strap over the pipes using the snap-in installation feature. Without the help of complex tools or costly technicians, you can secure your conduit over any surface. This metal strap holds the pipe securely on the wall..
  • WIDE USAGE: These clamps are an excellent choice for securing rigid and IMC Conduit. This metal strap provides great support for your plumbing work. The different sizes of this heavy-duty rigid strap make it easy for you to choose the perfect clamps for your outdoor or indoor plumbing application..
Check Stock

Floshine 2.5 in Lap Joint Band Clamps,Exhaust Muffler Clamp 4 PCS，2.5 Exhaust Pipe Clamps preformed Stainless Steel

  • Application--2.5" Exhaust clamps are a simple and quick tool for connecting exhaust system components, such as exhaust pipes, mufflers and catalytic Flexible disassembly and assembly methods allow maintenance while protecting the exhaust pipe from being twisted.
  • No welding design--This 2.5 exhaust clamp is tightly fitted 360° to evenly withstand tensile forces and prevent deformation and leakage of the exhaust pipe.No welding design of Lap joint exhaust sleeve clamp makes installation and removal easier and faster.
  • Component parts--304 stainless steel band,steel gasket,aluminum alloy I-block and zinc-plated flange bolt and nut.Make sure that the stainless steel surface is tight against the exhaust pipe and the nut is tightened when installing.
  • Non-rusting and corrosion resistant--Floshine Exhaust clamp is used for 2.5" OD to 2.5" OD exhaust pipe,mffler,catalytic converters connection.Stainless steel material has good corrosion resistance and is not easy to rust, providing a longer service life..
  • WARRANTY--Floshine offers a 5-month warranty and we are committed to enhancing the user experience.Please feel free to contact us with any questions about the product.
Check Stock

Motorcycle Exhaust Pipe Muffler Tip Universal Muffler Stainless Steel Exhaust Pipe Muffler (Black)

  • ◇【Works Universally】– The motorcycle exhaust pipe is a universal fitment product that will fit most motorcycles with 35mm-51mm diameter models.
  • ◇【Many colors to choose】–This universal muffler exhaust pipe muffler tip has some different colors to choose, which can give your motorcycle a new look.
  • ◇【High quality】–Muffler exhaust pipe use high quality stainless steel, which is durable, corrosion resistance and rustproof.
  • ◇【Easy installation】– Stainless steel motorcycle exhaust pipe muffler only needs simple welding to fit pipe below 51mm, is very easy to install. But professional Installation is Highly Recommended.
  • ◇【Quality warranty 】– We supply 90 days quality warranty. We will serve you within 24 hours whenever you have question on our Motorcycle Exhaust Pipe Muffler Tip, and we will take back your money if meet any quality problem, no worry about waste the money!.
Check Stock

Car Heart Exhaust Tip Universal Muffler Tip Stainless Steel Pipe Chrome Exhaust Tip Decorative Car Accessories (Colorful)

  • ✔️【HIGH-QUALITY MATERIAL】- It is made of high-quality stainless steel. The metal has been forged at high temperatures for many times and has excellent toughness, corrosion resistance and high temperature resistance. Also, due to the excellent thermal conductivity of stainless steel, the heat in the exhaust pipe will be quickly discharged..
  • ✔️【EXQUISITE WORKMANSHIP】- The surface of the exhaust pipe adopts baking varnish process, the color is clean and bright, and the surface has an anti-oxidation layer and an anti-scratch protective layer, which is corrosion-resistant and does not fade..
  • ✔️【SIMPLE INSTALLATION METHOD】- The exhaust pipe decoration is fixed and installed with screws, no drilling or welding is required, and no professional skills are required. Installation only takes a few minutes..
  • ✔️【UNIQUE APPEARANCE】- The heart-shaped shape not only brings a distinctive visual effect, but also makes the car exhaust smoother without increasing the noise generated by the engine exhaust, bringing you a pleasant driving experience..
Check Stock

Flexible Sink Drain Pipe，1-1/2" P-trap pipe for single or double Kitchen sink garbage disposal Adjustable P Trap

  • APPLICABLE SIZE: Inside diameter of the nuts at both ends is 1.78 "/45.2mm, and of the corrugated hose is 1-1/2 inches P trap is Adjust between 11 and 26 inches the great solution to your sink drain needs..
  • SINK GARBAGE DISPOSAL DRAIN PIPE: Flexible sink drain pipe is designed specifically for those hard to reach places. It is made from a durable and flexible material that allows it to bend and fit into tight spaces. It is designed to fit most standard kitchen sinks and garbage disposals..
  • SIMPLE INSTALLATION: Kitchen sink drain kit easy to install without any special tools.The pipe is made of durable PVC material, and it's easy to clean with a simple wipe-down..
  • HIGH TEMPERATURE AND CORROSION RESISTANCE TO PREVENT FROST CRACKING: P trap is a high-grade, corrosion-resistant plumbing pipe that is designed to withstand extreme temperatures and prevent frost cracking..
  • PLEASE NOTE THAT: There are two gaskets inside the package, Don't forget to put on the silicone sealing ring during installation(Thank For You).
Check Stock

Eastman 1 Inch IPS Pipe Repair Clamp, 3 Inch Length, Stainless Steel, 45185

  • PIPE REPAIR CLAMP: Pipe repair clamp tool is designed for use on steel, copper, and plastic pipes, and is perfect for providing repairs to the pipes which suffered puncture, pinhole, or split.
  • creates a positive seal that won't collapse on Schedule 40 PVC.
  • DURABLE: Pipe clamps are crafted from strong and sturdy 301 stainless steel for long-lasting reliability.
  • WHAT IS INCLUDED: Metal pipe clamp is equipped with a high quality rubber gasket that will not deteriorate, and includes galvanized iron lugs which protect against rust and corrosion.
  • SPECS: Pipe fitting clamp features a 1 Inch IPS connection, and can withstand temperatures of 20 degrees F to 180 degrees F.
  • PREFERRED BY THE PRO: Our tools and plumbing supplies are perfect for both home owners and professional contractors.
Check Stock

1/4 NPT Plug Pipe Plug Fitting Countersunk Thread Internal Hex Head Style Male Plug (1/4 inch Brass Plug, Pack of 5)

  • SIZE -- Brass 1/4 inch NPT pipe fitting plug, pack of 5..
  • ACID-RESISTANCE & ANTI-CORROSION MATERIAL-- Internal Hex Thread Male Plug is made of high quality brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.achinery, fittings or pipes to prevent leakage of air, steam, gases, water, oil and fluids under pressure. These plugs are also great for blocking off intake manifold water ports, water pump ports, water temp and oil sender holes, engine block holes, etc..
  • APPLICATIONS -- Designed to create a tighter seal for masking threaded holes and is commonly used to seal holes in machinery, fittings or pipes to prevent leakage of air, steam, gases, water, oil and fluids under pressure. These pipe plugs are also great for blocking off intake manifold water ports, water pump ports, water temp and oil sender holes, engine block holes, etc..
  • HIGH STRENGTH AND HARDNESS -- NPT Male Pipe is high strength and hardness ，make it last longer. Reduces the trouble of leaking and leaking during your use..
  • CUSTOMER SERVICE -- Professional factories produce quality threaded pipe. Every detail reflects a strong texture performance. Fast Delivery, we guarantee the quality before the item ships. 30 Days Free Refund..
Check Stock