Top Pipe Cutting Blade

YIYITOOLS PVC Pipe Cutters - Ratcheting Hose & Tube Cutter, Cutting 2-1/2” PEX, PPR, PVC Plastic Pipe, Suitable for Plumbers, Home Owner, Solar Company, Car Repair

  • Fitment:The PVC Cutter is Suitable for Plumbers, Home Owner, Solar Company, Car Repair and Pipe Tube Repair.Cuts Up to 2-1/2" Pipe Capacity.(When cutting PVC flexible pipe you should revolve the pipe whilst compressing).
  • Big opening: AIRAJ PVC PIPE CUTTER can be used on a pipe diameter of up to 63 mm..
  • Material:The durable cutting machine is made of 4.0 thickened manganese steel, sharp, and the surface is polished. The blade body is made of die-cast aluminum alloy with good strength, good durability and toughness, and is not easy to rust..
  • Design:Ergonomic Grips on Bottom Handle, Delivers Fast and Easy Single Stroke Cuts, Faster Positioning with no Ratcheting or Twisting. More Convenient for Using, Reduces User Fatigue.Newest Ratcheting Design is more Labor-saving and Convenient, Only One Hand is Needed to Complete the Cutting Operation..
  • Easy to use: Before starting, each hand holds a handle and pulls it upward in a fan-shaped way to open the blade,put the pipe diameter below 63mm in cutter,push down handle repeatedly,forthwith cut off.After cutting,clean the blade with rustproof oil.Close the handle for ready use next time..
Check Stock

Copper pipe cutter, aluminum pipe cutter, galvanized pipe cutter, stainless steel pipe cutter, cutting pipe diameter 4-28mm

  • The blade is made of 65Mn special steel, which can cut the pipe accurately and sharply..
  • It can cut copper pipe, titanium pipe, stainless steel and aluminum pipe..
  • The blade can keep rolling in the same circle when cutting..
  • [Cutting tube thickness] less than 1.5mm, blades can be replaced, high-quality blades have a longer service life.
Check Stock

Libraton PVC Cutter 1-5/8\

  • ...sharped and Teflon coated. Sturdy construction and big size suitable for heavy-duty use..
  • 【Widely Application】The ratcheting PVC cutter is designed up to 1-5/8-inch (42mm) outer diameter capacity ideal for use to cut a variety of plastic pipe and tube(PVC,CPVC,PP-R, PEX, PE, Rubber Hose etc.), It is an essential cutting tool for your home handyman, plumbers, electricians, and vehicle mechanics..
  • 【Efficient Working with Safety】This plastic pipe cutter equipped with ratcheting drive technology and arch angle design to greatly save your strength when cut pipes. The Spring-loaded ergonomic handle provide a reliable grip and powerful bite force improve work efficiency by fast cutting, faster positioning and single stroke cuts. User can cut pipe within 5 to 20 seconds .There is a safe lock in the bottom of PEX cutting tool. You can buckle it when you don't use the cutter..
  • 【Quick Change and Replacement Blade】The PVC cutter is unique designed with Quick Change system. You can quick change the blade replacement easily within 10 seconds without any other tools. Also we provide one EXTRA replacement blade in Set. So you can have TWO blades with our PVC cutter..
  • 【100% Satisfaction Guarantee】Supply a 12-month warranty to this PVC pipe cutter. We have....
Check Stock

LGXEnzhuo Pipe Cutter Pipeline Hydraulic Pipe Cutting Machine Fire Steel Pipe Cutting Machine Can Cut Pipe Diameter 40-280mm 220V 750W

  • 【WIDE APPLICATION】Pipeline hydraulic pipe cutting machine is used for ordinary steel pipe galvanized pipe, plastic-lined pipe, spiral pipe and seamless steel pipe cutting. Widely used in pipeline construction related to fire protection, construction, water supply mines, coal mines, etc..
  • 【PARAMETER】Diameter of steel pipe that can be cut:40-280mm.
  • The wall thickness of the steel pipe that can be cut:3-6mm.
  • 【HIGH EFFICIENCY】Copper motor, power 750W, with high efficiency, stable performance and long service life..
  • 【HIGH STRENGTH BLADE】High strength blade is made of high quality steel to ensure good cutting effect..
  • 【DURABLE】Thicker roller, more wear-resistant.Strong, sturdy frame, suitable for heavy duty operation..
Check Stock

scottchen PRO Inside Pipe Cutter 1-1/2\(36mm) Internal PVC Plastic Pipe Cutting Tool Diamond Cutting Blade-1set

  • 【Function】This inner pipe cutting tool excellent to cut the pipe from inside which normal pipe cutter hard to reach..
  • 【Size】The pipe cutter diamond cutting blade is 1-1/2” diameter, suitable for cutting 1-1/2” and above size pipe. The shank 4” length, can reach deeper place to do cutting project..
  • 【Appliance】This plumbing tool ideal for various pipe cutting, such as: PVC, HDPE, CPVC and ABS plastic etc, fast cutting without melting the pipe..
  • 【Guide wheel】The bottom guide wheel great for fast and stable pipe cutting, minimizes vibration during the work progress, form a perfect straight cutting edge appearance..
  • 【Installation】The internal PVC cutter easy to install (detail as image). The shaft with 1/4” hex head quick mount to hand power drill. NOTE: Must rotary Anti-clockwise. Before cutting, please put something in the pipe to prevent it from falling off..
Check Stock

Bravex Tube Cutter 1/4\ to 2\

  • [High-quality Blade] This pipe cutter blade is made form aluminum alloy, wear-resistant. It will never get rust..
  • [Wide Application] The copper tube cutter can be used to cut copper pipe, aluminum pipe and thin stainless steel tube. Cutting range is up to 2" (50mm)(OUTER DIAMETER)..
  • [Usable Attachment] There is a deburring tool attached with the pipe cutter tool, made of sturdy plastic construction and high-speed steel blades. It can deliver quick, clean and easy inside diameter reaming of different tubes (e.g. copper, aluminum, PVC and stainless steel tubes)..
  • [Cutting Efficiency] Solid ergonomic PVC knob is designed on the bottom of the copper cutter, providing the stability when using the cutter and improving the cutting efficiency..
  • [100% Money-Back Guarantee] If you're not satisfied, return back to us, no-hassle refund or product replacement..
Check Stock

PVC Cutter, Up to 2-1/2 inch, Ratchet-type PVC Pipe Cutter for Cutting PEX,PVC,PPR and Plastic Hoses,Suitable for Maintenance, Plumber and DIY Home worker (2-1/2\(Gray))

  • 【Wide range of applications】: The ratchet cutter is designed up to 2-1/2-inch (63mm) outer diameter,cutting knife is very suitable for all kinds of plastic pipes(PVC, CPVC, PP-R, PEX, PE, etc),Great helper for home handy man, plumbers, electricians, and vehicle mechanics..
  • 【Heavy duty】: The tubing cutter blade itself is made of SK5 material with high strength and hardness. The surface is covered with Teflon coating,high hardness,smooth, sharp,Cutting quickly..
  • 【Ratchet design】: The pipe cutting machine adopts ratchet drive technology, cutting pipe with less effort and improving work efficiency. Pressing the self-locking during use can prevent the cutter from springing back, cutting the pipe faster, saving energy and safety.and the triangular convex point design at the blade can better cut the pipe..
  • 【Ergonomic design】: The bottom handle adopts ergonomic grip to protect the hand, which can make single stroke cutting quickly and easily, Suitable for long hours..
  • 【Safe and convenient for you】: Put the pipe to be cut into the corresponding knife edge, and continuously clamp and tighten the handle to easily cut the pipe. After use, just fasten the safety lock at the bottom, and the pipe cutting machine will become small and easy to carry o....
Check Stock

Induzeug Pipe and PVC Cutter for Cutting 1-1/3\

  • 【Ergonomic Ratchet design】The professional pipe cutting adopts self-locking ratchet design. The design to cutting operation with one hand, The handle adopts the principle of leverage, which makes cutting more labor-saving. Prevent rebound design with safety of users..
  • 【Blade durable】The high-quality manganese steel blade is adopts Japanese Teflon coating process strong shearing force, high hardness, sharp blade, with anti-rust coating, increases the service life..
  • 【Ergonomic handle easy to use】The aluminum alloy material and the handle rubber wrap the handle, which increases the anti-skid and wear resistance of the handle, and also improves the comfort of use.There is a buckle at the bottom of the handle, which is convenient to open and use with one hand. The handle locks the safety lock when not in use, saving space and preventing accidental injury..
  • 【Wide range of multipurpose】The Induzeug Pipe Cutter simple to use and easy to operate, for cutting most plastic (PVC, UPVC, PPR, PEX, PE, rubber hose) and multilayer pipes. You can choose the corresponding size Pipe Cutter, cut for 1-1/3.
Check Stock

Induzeug Pipe and PVC Cutter for Cutting 1-1/3\

  • 【Ergonomic Ratchet design】The professional pipe cutting adopts self-locking ratchet design. The design to cutting operation with one hand, The handle adopts the principle of leverage, which makes cutting more labor-saving. Prevent rebound design with safety of users..
  • 【Blade durable】The high-quality manganese steel blade is adopts Japanese Teflon coating process strong shearing force, high hardness, sharp blade, with anti-rust coating, increases the service life..
  • 【[Ergonomic handle easy to use】The aluminum alloy material and the handle rubber wrap the handle, which increases the anti-skid and wear resistance of the handle, and also improves the comfort of use.There is a buckle at the bottom of the handle, which is convenient to open and use with one hand. The handle locks the safety lock when not in use, saving space and preventing accidental injury..
  • 【Wide range of multipurpose】The Induzeug Pipe Cutter simple to use and easy to operate, for cutting most plastic (PVC, UPVC, PPR, PEX, PE, rubber hose) and multilayer pipes. You can choose the corresponding size Pipe Cutter, cut for 1-1/3.
Check Stock

Jones Stephens S49005 E-Z Stroke Pipe Saw 8” Pipe Saw

  • Hand Saw: This E-Z Stroke Pipe Saw is a convenient, lightweight hand saw with a comfortable ergonomic handle. It can easily be used to cut plastic,....
  • Pull-Stroke Saw: Jones Stephens’ E-Z Stroke Pipe Saw is one of the most convenient and easy-to-use cutting saws. With razor sharp teeth, the....
  • Flexible Blade: The saw features a highly flexible blade that allows for flush cutting without marring adjacent surfaces..
  • Razor Sharp Teeth: The tri-edge ground teeth cut through material like a knife, which makes this saw the go-to for all your cutting needs..
  • Replaceable Blade: If you need a smaller blade or your blade is dull or damaged, the orange handle accepts all Jones Stephens E-Z Stroke Saw blades.....
Check Stock

PVC Pipe Cutter, One-hand Ratchet Pipe Cutting Tool for PVC/PPR/PEX/Rubber Hose Cut up to 42mm, Plastic Pipe Tubing Cutter with Replacement SK5 Steel Blade, No Burrs

  • 【Robust and Advanced Design】: Durable aluminum construction for heavy duty use. Ergonomic soft handle grip for reducing hand fatigue for long time working. Locking mechanism for safe storage..
  • 【Quick-change blade mechanism】: Plastic pipe cutter comes with a replacement 'V' shaped blade. High Hardness SK5 carbon steel sharp blade reduces tube deformation..
  • 【Ratchet drive Design】: The professional PVC cutter adopts self-locking ratchet design. The ratchet drive greatly enhances the bite force.It can prevent the cutter from springing back, and cutting is sharp, fast, safe. It was designed to make cutting pipes easily..
  • 【High Cutting Capacity】: The Pipe Cutter blade for cutting most plastic (PVC, CPVC, PP, PEX, PE, rubber hose) and multi layer pipes. the cutting capacity up to 1-2/3”(42mm) outside diameter..
  • 【Wide Application】: Suitable for plumber,professional maintenance staff,electrician and car maintenance master as well as daily home,decoration. Pipe shears is an ideal choice for cutting all kinds of plastic pipes and multi-layer composite tubes ..
Check Stock

Steel Dragon Tools® 50767 Model 258 Power Pipe Cutter, Pipe Cutting Machine for 2-1/2-Inches to 8-Inch Schedule 10/40 Steel Pipe

  • 【Precision Cutting】 - Sharp SKD cutting blade wheel and 6 Pcs high density ball bearing rollers clamps the pipe firmly during cutting, helping pipe cutter perform cutting for 5 to 50mm pipe with stability and precision, especially for metal & steel material, which frees you from the trouble of unfit pipe and uneven cutting surface because of instability.
  • 【Heavy Duty】 - Made of high density but lightweight aluminum alloy, copper pipe cutter is durable and compact. It won’t be broken after many times of cutting and it will last a long time. And aluminum alloy body makes metal pipe cutter more suitable for high density metal material cutting.
  • 【Clear Cutting】 - Tube cutter with 6pcs ball bearing rollers offers you a smooth cutting, improving cutting efficiency. Some small burrs are inevitable. So our steel pipe cutter comes with a deburring tool, which is made of sturdy plastic construction and high-speed steel blades. It can be used on both sides to perform inner diameter reaming and outer diameter grinding on the inner and outer sides of the incision to prevent scratches.
  • 【Ease Of Use】 - The bottom of the steel pipe cutter is equipped with a knob, which is comfortable to hold, can quickly adjust the tool, and provides a strong clamping f....
Check Stock