Top Pipe Ends

Spears 1429 Series PVC Tube Fitting Coupling Schedule 40 Gray 1-1/2 x 1 Barbed

  • Fitting connects to schedule 40 PE pipe on both ends.
  • PVC for strength and resistance to reactions with acids, gasoline, alcohol, and hydrocarbons.
  • Barbed fitting creates a tight seal on flexible pipe when used with a hose clamp (sold separately).
  • Meets ASTM D 2609 standards for plastic insert fittings and certified by NSF for use with potable water.
Check Stock

Spears 1429 Series PVC Tube Fitting Coupling Schedule 40 Gray 3/4 x 1/2 Barbed

  • Fitting connects to schedule 40 PE pipe on both ends.
  • PVC for strength and resistance to reactions with acids, gasoline, alcohol, and hydrocarbons.
  • Barbed fitting creates a tight seal on flexible pipe when used with a hose clamp (sold separately).
  • Meets ASTM D 2609 standards for plastic insert fittings and certified by NSF for use with potable water.
Check Stock

LASCO 03-1563 Chrome Plated Floor and Ceiling Split Flange Fits 2-Inch Iron Pipe

  • Purpose - floor and ceiling plates also known as escutcheon plates are used to cover and close the gap between the outside diameter or the pipe and the inside diameter of the wall, floor, or ceiling opening to avoid damage and leakage..
  • Measurements – Hole diameter is 2.38 inch (60.33mm) and outside diameter is 4.53 inches (115mm) Please measure your pipe accordingly and make sure that it matches the measurements on this description..
  • Fittings - Fits 2 inch IPS (2.375" Outside Diameter) Galvanized Pipe or 2-1/4 (2.25" Outside Diameter) inch Copper Pipe. Perfect for bathroom and kitchen tubular pipes..
  • Application - with its sturdy construction and chrome finish, it can be installed on a lot of things with a guarantee to match the design of the surroundings..
  • Easy Installation - Experience a hassle free installation with no expert plumbing skills or tools needed. Simply split the flange to fit the pipe circumference and close the ends together to lock and protect the pipe and wall, floor, or ceiling opening..
Check Stock

Joywayus Hex Nipple 1/2' Male x 1/2' Male Threaded Stainless Steel 304 Threaded Nipple Pipe Fittings for Brew Kit Home Piping (Pack of 5)

  • 【Size】1/2" Male x 1/2" Male Thread. Tapered thread. Pipe fittings are components used for connecting, terminating, controlling flow, and changing the direction of pipe..
  • 【High Quality Material &Threads】Made of quality stainless steel 304, durable and sturdy corrosion resistance, ductility at high temperatures, and low magnetic permeability. High quality and deep threads allow the fittings to bite better, tight threads, not easy to slip..
  • 【Hex Nipple】The hex nipple fitting is a short length of pipe with threaded ends for connecting threaded pipes, and it has a hexagonal section in the middle for an increased bearing surface when adjusting the fitting with a wrench..
  • 【Operating temperature range】Temperature rating: -65 to 250 degrees F.
  • 【Widely Applications】Male threads for connecting to female threaded pipes, this premium pipe fitting can be used to connect various pipes, such as air pipe, fuel pipe, water pipe as well as air tools.
  • it can also be used with grease, fuels, LP and natural gas, refrigeration, instrumentation and hydraulic systems in low and medium pressure pipe line connections..
Check Stock

Valterra 8' PVC Gate Valve - Slip Hub Fittings with Stainless Steel Paddle

  • SAVES YOU TIME AND MONEY: By creating more consistent bevels in just 10 seconds, the Bevel Pro PVC Pipe Beveling Tool will improve safety, increase production and reduce trench time..
  • NO MORE HAND FILING: Bevel Pro fits snugly over pipe ends to ensure precise bevels every time. It's designed to create bevels that form a smooth join to eliminate displaced or torn gaskets..
  • QUICKER, SAFER OPTION: No more time-consuming hand filing or using powerful and dangerous tools in incorrect ways to get the bevels you need. Simply use Bevel Pro and in 10 seconds, the job is done..
  • MADE IN THE USA: Bevel Pro PVC pipe beveling tools are made in the USA with durable and high-quality U.S. steel. These pipe bevelers can be easily sharpened multiple times to increase tool life..
  • VERSATILE: Sized to match common pipe diameters, simply insert your Bevel Pro into a 1/2" or larger drill/grinder. A handy arbor adapter for gas-powered drills and hole hogs is available separately..
Check Stock

Roadformer 5" Exhaust Clamp Narrow Band Stainless Steel (2 Pack)

  • This 5" exhaust clamp is made in Stainless Steel. Used to joint 5 inch OD pipe slip fit into ID pipe for connection. Two pieces included in a single pack.
  • Pre-attached hardware for fast, easy and accurate installation, Roadformer Clamp technology provides simple, effective way to maintain and repair your exhaust system.
  • Grade 10.9 bolts provided superior capability of clamping and sealing. This narrow band clamp does create over a ton of clamping force without crushing pipes, resulting in strong and serviceable joint. The working torque is in the range of 40-50 ft-lbs.
  • Our innovation Reaction Block Technology provides a full 360-degree equal distribution of stretching force, prohibiting pipe distortion, durable installation without damage to pipe ends.
  • Roadformer Clamps set industry standard in premium quality and affordable price. Roadformer private labeled products do means Quality, Trust and Responsibility.
Check Stock

FORMUFIT F034CRX-UV Cross PVC Fitting, Furniture Grade, 3/4\ Size, Clear

  • FOUR DEEP SOCKETS: Connect up to four (4) PVC pipe segments in a cross configuration..
  • WORKS WITH 3/4" SIZE PVC PIPE: Fits 3/4” Size PVC Pipe, which has an outside diameter of 1-1/16" (1. 050”).
  • MADE TO LAST: : UV resistant PVC material resists fluorescent lighting degradation. Lasts for years in indirect sunlight without yellowing, discoloration or cracking.
  • NO MARKS, LOOKS GREAT: Glossy, clean unmarked surfaces for a professional look with tapered ends on each socket end to allow a smooth transition from the pipe to the fitting. Will not snag clothing or pet hair like plumbing grade PVC fittings.
  • COMPLETEMENTS YOUR DESIGN: Maintains the same socket depth, fit, finish and color as all other FORMUFIT products.
  • MADE IN USA: Manufactured in the USA with a 1 year manufacturer.
Check Stock

General Tools 127 Iron Pipe Cutter

  • Cuts up to 2-5/8-Inch copper and iron pipe.
  • Grooved rollers accept flared pipe ends to provide cuts directly below the flare. Solid frame for greater strength.
  • Cutting wheel is made from bearing tool steel for maximum durability. Includes fold-out deburrer with positive lock and two cutting edges.
  • Hardened Acme threads for greater cutting strength.
Check Stock

2 Butt Joint Band Clamp Exhaust Sleeve Stainless Steel 2 Pieces

  • Removable and reusable, easy to install without welding..
  • Stainless steel clamp with great performance in anti-corrosion.
  • Durable installation without damage to pipe ends or flex hose..
  • Suitable for 2" exhaust pipe, muffler, and catalytic converters connection.
Check Stock

Supply Giant DUFD0058 Copper Cap with Sweat Socket 5/8

  • For use with 5/8 inch Nominal size Copper pipe.
Check Stock

SHURFLO 255-325 1/2\ Barb Swivel Nut Strainer

  • Mini "T" line strainer pipe fitting for adding filtration to a pipe line.
  • Glass reinforced polypropylene for resistance to most chemicals and dimensional stability, and stainless steel 304 screen for resistance to corrosion and extreme temperatures.
  • 1/2" female NPT threaded connection on both ends.
  • EPDM gaskets standard. FKM (viton type) available.
Check Stock

SYMOTTEC 1/18'' to 3-1/2'' Exhaust Tail Pipe Expander Muffler Spreader Tool Set Compatible with Most Vehicles and Trucks

  • This Exhaust Pipe Expander Muffler Spreader Tool Set is designed to quickly and easily straighten clamp dents and clamp marks in mufflers and tail pipes, and stretch pipe openings or fix damaged pipe ends. Can be use with a hand ratchet or breaker bar and also a hand wrenches..
  • This Tail Pipe Expander set includes three different expander sizes, can work with all 1-1/8inch to 3-1/2inch ID thin-wall pipes and compatible with most vehicles and trucks..
  • Drop forged and heat treated steel construction for strength and hardness and through strict quality inspection. Suitable for family and professional mechanic. Plug and play, you can buy it with confidence..
  • Kit Includes 1 x small expander: 1-1/8" to 1-3/4", 1 x medium expander: 1-1/2" to 2-1/2", 1 x large Expander: 2-1/8" to 3-1/2, 6 x extra O-rings..
  • IMPORTANT NOTICE!!! (1) When expanding, the beveled steel cones of the expander must be fully inserted into the pipe, not half.
  • (2) Try to use a manual ratchet or manual wrench to turn the pipe support tool to expand the pipe, rather than electric Ratchet.
Check Stock