Top Pipe Fitting Injection Mould
boost/vacuum gauge silicone coupler adapter - Car Turbocharger Pipe Fitting Universal Turbocharger Silicone Boost Pipe Hose Nipple Turbo Vacuum VAC Gauge Fitting TDI
- Wide Application---The turbocharger pipe fitting is suitable for a 4mm inner diameter pipe. 100% brand new aftermarket Boost Pipe Fitting that has never been used.
- For Boost Gauge---This boost hose nipple fitting allows you to fit a boost gauge or any other type of instrument where vacuum or boost pressure is required.
- Superior Quality Aluminum Alloy---The turbo boost pipe hose nipple is made of high quality aluminum alloy and durable to use. The manufacture of the fitting meets the strict quality requirements.
- Easy Installation---The turbocharger mounting kit is easy to install, simply drill a 8mm hole in your silicone boost pipe and push the nipple through the hole (from the inside), put on the sealing o-ring, washer and tighten down with the nut.
- Quality Assurance---As a professional seller, we provide high quality products and considerate services. Every product must go through strict inspection to ensure reliable quality. Please rest assured to buy our products, hope you have a pleasant shopping experience.
Check StockOatey 30863 Heavy Duty Solvent Cement, 8 Oz, Can, Liquid, Clear
- Heavy duty Clear cement for use on all schedules and classes PVC pipe and fitting up to 12” diameter with interference fit, up to 18” for non-pressure.
- Low-VOC solvent cement meets California South coast air quality management district (SCAQMD) 1168/316a or baaqmd method 40 and various environmental requirements.
- Heavy Duty Clear cement for use on all schedules and classes PVC pipe and fitting up to 12î diameter with interference fit, up to 18î for non-pressure.
- Lo-V.O.C. Solvent Cement meets California South Coast Air Quality Management District (SCAQMD).
- Thick formula fills gaps in large diameter pipe and loose fitting joints.
- Recommended for potable water, pressure pipe, conduit and DWV.
- Recommended application temperature 40°F to 110°F / 4°C to 43°C.
Check StockRhino-Rack 572 Roof Mount
- Inside length of the Ski Carrier is 250mm / 9.84 inches, Key locking for security, UV Protected.
- Easy release and lock mechanisms for gloved hands, Rubber grip profile to protect your skis, Waterproof.
- Universal fitting clamp to all Rhino-Rack crossbars types, Stealthier black look.
- Universal fitting clamps to most non-Rhino-Rack crossbrs, Stronger arm locking, Mould Resistant.
- Fits 2 pairs of skis, MasterKey compatible, Rust Proof.
Check Stock0.38 Pens Fine Point Smooth Writing Pens Ultra Fine Retractable Pens,Black Permanent Ink,0.38mm Tip Ultra Fine Gel pen
- Grip - A:Doubled Injection Mould Process,The Two Parts of the Pen Grip and Pen Barrel are Injection Molded at the Same Time. B:The New Silica Gel....
- Barrel - Octagonal Pen Barrel :Improved the Force-Bearing Surface in Contact with the Finger & Pressure and Drop Resistance of the Pen Barrel....
- Ink – High-Quality Black Permanent Inks From "Mikuni "are Waterproof and Sun-proof, and can be archived permanently..
- Tip - 0.38mm Ultra Fine Point, High-Precision Pen Tip, Production by Swiss MIKRON Machine Tool, Craftsmanship Comparable to a Swiss Watch, Tungsten....
Check Stock2xhome Set of 2 Clear Louis Ghost Dining Armchairs Polycarbonate Designer Acrylic Transparent Crystal Chair with Arms Glass Modern Mid Century Victorian See Through for Desk Kitchen
- Due to the glossy finish the clear chair, you will notice some swirls. Single injection molding will have molding line and injection point at some spots. They are not defected. Also blue/purple hue appears on the chair but will fade out over time..
- Made from one single mould from crystal clear polycarbonate (stronger than acrylic).
- Stackable, Scratch Resistant, and UV Protected.
- Suitable for commercial and residential indoor & outdoor use.
Check StockiCrimp CRQ01 Disconnect Tong Sized 1/2 inch, 3/4 inch, 1 inch, Removal Tool used for Demount Brass Push Fit, Push-to-Connect Fittings
- CRQ01 Push-Fit fitting disconnect tool has 3 teeth available in 1/2 in., 3/4 in. and 1 in. sizes, allows for easy removal of brass push-to-connect fitting from pipe.
- CRQ01 disconnect tong is the easiest way to disconnect brass Push to Connect fittings in hard to reach places where it can be tough to get leverage on the release collar.
- Compact design with wide grip handles. One-handed operation. Quick and easy disassembly.
- To use the disconnect tong, slide the tong over the fitting and the pipe. Squeeze the tong to press the fittings collar and pull the pipe from the fitting. Easier to use in tight situations.
- The disconnect tool depresses the release collar using the force applied by your hand to allow the teeth of the fitting to release and the fitting to be removed, reducing the risk of installation errors.
Check StockYinpecly 30mm OD 15mm ID 40mm Long Spiral Stamping Light Load Compression Mould Die Spring, for Mechanical Equipment 3D Printer Accessories Yellow Tone 2pcs
- 【SIZE】- Hole Diameter (Outer Diameter): 30mm/1.18".
- Inner Diameter (Tolerance +1mm/-0.5mm): 15mm/0.59".
- 【MATERIAL】- The Compression mould die spring is made of spring steel, and the surface is painted, so there is more durable and can be reused many times.
- 【FEATURE】- Mold springs adopt closed design, rectangular cross-section, and harder than ordinary springs.
- They have the characteristics of small size and high precision.
- 【APPLICATION】- Mold springs are mainly used in the mold machinery of injection molding machines, such as 3D printer heated bed, which are very suitable for high-stress applications, as well as various springs and other applications.
- 【PACKAGE CONTENT】- Package Content: 2pcs x Compression Mould Die Spring.
Check StockYinpecly 12mm OD 6mm ID 30mm Long Spiral Stamping Middle Load Compression Mould Die Spring, for Mechanical Equipment 3D Printer Accessories Red Tone 10pcs
- 【SIZE】- Hole Diameter (Outer Diameter): 12mm/0.47".
- Inner Diameter (Tolerance +1mm/-0.5mm): 6mm/0.24".
- 【MATERIAL】- The Compression mould die spring is made of spring steel, and the surface is painted, so there is more durable and can be reused many times.
- 【FEATURE】- Mold springs adopt closed design, rectangular cross-section, and harder than ordinary springs.
- They have the characteristics of small size and high precision.
- 【APPLICATION】- Mold springs are mainly used in the mold machinery of injection molding machines, such as 3D printer heated bed, which are very suitable for high-stress applications, as well as various springs and other applications.
- 【PACKAGE CONTENT】- Package Content: 10pcs x Compression Mould Die Spring.
Check StockYinpecly 20mm OD 10mm ID 30mm Long Spiral Stamping Light Load Compression Mould Die Spring, for Mechanical Equipment 3D Printer Accessories Blue Tone 10pcs
- 【SIZE】- Hole Diameter (Outer Diameter): 20mm/0.79".
- Inner Diameter (Tolerance +1mm/-0.5mm): 10mm/0.39".
- 【MATERIAL】- The Compression mould die spring is made of spring steel, and the surface is painted, so there is more durable and can be reused many times.
- 【FEATURE】- Mold springs adopt closed design, rectangular cross-section, and harder than ordinary springs.
- They have the characteristics of small size and high precision.
- 【APPLICATION】- Mold springs are mainly used in the mold machinery of injection molding machines, such as 3D printer heated bed, which are very suitable for high-stress applications, as well as various springs and other applications.
- 【PACKAGE CONTENT】- Package Content: 10pcs x Compression Mould Die Spring.
Check StockFuel Injector Cleaner Tool Car Fuel System Cleaner Kit Portable Non-Dismantle Cleaning Tools Fuel Injector Tester 600ML 140PSI Injector Cleaning Machine(Without Liquid)
- 【Multifunctional Fuel Injection Cleaner Tool】 This injector cleaner tool can clean the entire fuel system, including the throttle valve, fuel nozzle and combustion chamber. At the same time, it also has a high and low pressure cleaning function to help you better complete the fuel system cleaning job..
- 【Disassembly-Free & Dual-System Fuel System Cleaner Kit】The fuel system cleaner kit is used to clean the fuel injector, intake system and three-way catalytic converter. It can clean the car without disassembly. And it has two electronic fuel injection systems. One engine has an oil return pipe, and the other engine does not have an oil return pipe (Quick-connect anti-corrosion, anti-friction joints and anti-friction pipes for all cleaning fluids.).
- 【Adjustment of Throttle Mode of Fuel Injector Cleaning Kit】The connection method is the same, just adjust the air source pressure to 1-5PSI. How to identify the inlet and return hoses: ①Generally speaking, the larger the inlet pipe, the smaller the return pipe.
- ②There is always a filter interface on the side of the inlet hose and a buffer interface on the return side.
- ③There is an arrow on the hose Indicate the fuel flow direction..
- 【Widely Applicable Engine Cleaning Tools】 This injector c....
Check StockFXTUL Fuel Injector Cleaner, Fuel System Cleaner Air Intake System Fuel Injector Nozzle Throttle Body Cleaner for Gasoline Diesel Cars with Carrying Case Non-dismantle
- ...ll cause blockage and poisoning of TWC. So you need C-100, a professional fuel injector cleaner to help you out with simple and fast cleaning of the fuel system without damage. You can use it on TWC, intake manifold, throttle valve, and exhaust pipe.
- 【EFI-Electronic Fuel Injection System】Electronic Fuel Injection System has two types, throttle or electronic injection. one engine with fuel-return pipe, another one engine without fuel-return pipe.Throttle Model: The way of connection is the same as EFI System, just adjust the pressure of the air source 1-5PSI..
- 【COMPLETE TOOL SET】Most cars and light trucks of the European Union, Asia, and the United States can use this fuel system cleaner because it is equipped with various types of adapters to meet the needs of different models..
- 【SAFE AND QUICK CONNECTION】The throttle body cleaner has a one-way valve treated with a special process, which has good airtightness. In addition, there is a quick connection joint, which is treated with anti-corrosion and wear resistance. Don't worry about being corroded by the cleaning liquid.
Check StockOTC 6080 Fuel Injection Test Kit for Master Cummins Diesel Engine
- Includes the fittings and gauge needed to check fuel pressure fuel volume and fuel restrictions from the delivery pump to the injection pump.
- Kit includes special quick-disconnect banjo fitting two fuel injection quick-coupler adapters quick-disconnect banjo fitting gauge assembly and fuel volume test adapter.
- Also includes a diesel fuel inlet restriction test adapter for 1988-98 Dodge pickups and vans with 5.9L 12-valve and 1998-1/2-newer 5.9L 24-valve Cummins diesel engines.
Check Stock