Top Pipe Threads

Omninmo NPT Pipe Tap Set Thread Forming Taps High Speed Steel Drill Bits Thread Tap Attack Pipe Plate Hand Tapping for Cleaning or Re-thread Damaged or Jam Pipe Threads Size G3/4 55 Degrees

  • High Strength Material: Omninmo pipe tap set is different from the traditional carbon steel material. Our pipe taps is made of composite steel material, which is more durable and Higher hardness..
  • Professional Cutting Tools: Right-Hand cut tools have a cutting action that engages when they are run in a clockwise direction.Round shank with square end, Straight flute tools allow chips to collect in the flutes as they cut and are well suited for most applications in shallow cuts..
  • Convenient and Durable: Uncoated tools feature just the base substrate without any additional treatment or coatings,Carbon steel pipe taps are designed to clean or rethread to damage or block pipe threads,cuts internal threads in pipes..
  • Universal size: Nominal size of the tap is that of the pipe fitting being tapped. Available in National Pipe Taper (NPT) and British Standard Pipe Taper (BSP). The size is 3/4.Omninmo NPT Thread Forming Taps is ideal for pipe fittings..
  • Product Guarantee: If you have any questions, Please contact us in time, We will reply to you immediately to solve your problem..
Check Stock

RESTEK 20250 Compact Ferrule for Agilent Gas Chromatography, Graphite, Fit =0.28 mm ID (Pack of 10)

  • Coupling pipe fitting for connecting and extending pipes.
  • Female National Pipe Taper (NPT) threads on both ends for connecting male pipes.
  • Made from stainless steel 316 for strength.
  • Higher corrosion resistance than stainless steel 304.
  • NPT thread for compatibility with other threads.
Check Stock

Rotary Thread File RTK1, Chase, Restore, Repair, and Clean: Male, Female, Inch, Metric, And Pipe Threads. (3 Piece File Starter Kit)

  • Restore dent, dinged, or damaged threads in nuts and bolts within a minute with the RT1 Rotary Thread File! Restoring threads on the smallest bolts and getting into deep nuts without worrying about getting the right pitch is exactly what you’ll get with the Rotary Thread Starter Kit..
  • Unlike traditional thread repair tools that come in standard sizes, the RT1 and RT2 that comes in this kit is an all-in-one tool that eliminates the need for switching when you’re working with both external and internal threads..
  • The ingenious universal design of our thread file is what makes it stand out from other thread files. All inch, metric and pipe threads have the same 60 degree "V" angle. This allows this tool to quickly work on any project, both internal and external threads..
  • Ideal for restoring Inch, Metric, Pipe, Male, and Female Threads made out of Metals, Hardened Metals, Ceramics, Glass, and Plastics, the RTK1 Starter Kit has become the go-to thread repair tool for both home improvement enthusiasts as well as industry professionals..
  • Our US Patended and Engineered Rotary thread file is great for home projects, industrial, automotive, farm & ranch, and technicians. Purchase with peace of mind with our 24/7 friendly customer service..
Check Stock

Anderson Metals 56120-0806 Brass Pipe Fitting, Adapter, 3/8' Male Pipe x 1/2' Female Pipe

  • Adapter for connecting pipes or fittings of different types.
  • Male National Pipe Taper (NPT) threads on one end and female NPT threads on the other for connecting pipes with different ends. Please see NPT Thread - chart to determine the correct size required. Pipe Size and actual Thread OD are different. The Thread OD is larger than the Pipe Size..
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
  • Operating temperatures range from -53 to 121 degrees C (-65 to 250 degrees F).
  • Meets specifications ASTM B584 and ASME/ANSI B16 for quality assurance.
  • These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories..
Check Stock

Supply Giant CSCV1124 1-1/2'' Male x 1 Inch Female NPT Lead Free Bushing, Fitting with Hexagonal Head Brass Construction Higher Corrosion Resistance Economical & Easy to Install, 19

  • Hexagonal Bushing for Connecting Pipes of Different Sizes.
  • Female National Pipe Taper (NPT) Threads on One End and Male NPT Threads on the other for Connecting Different Types of Pipe.
  • Made from Brass for Higher Corrosion Resistance than Steel.
  • NPT Thread for Creating Tighter Seals Than Straight Threads.
  • Certified to Meet NSF/ANSI 61-8 Standard for Quality Assurance.
Check Stock

Legines Brass Pipe Fitting Long Nipple, 1/8' NPT Male x 1/8' NPT Male Extender Straight Connector, 1-1/2'Length 1200psi (Pack of 5)

  • Long nipple for connecting two threaded pipes and extending pipe length.
  • 1/8" Male National Pipe Taper (NPT) threads for connecting to 1/8" female threaded pipes.
  • Legines pipe fittings are made of CA360 or CA377 brass, not ordinary copper alloy, and meet SAE standard, have dryseal threads, forgings & extruded..
  • Operating pressure of our fittings is up to 1200psi, more higher than other general fittings. Temperatures range from -53 to 121 degrees C (-65 to 250 degrees F).
  • These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories..
Check Stock

Drill America DWTPT1/4-1-1/4SET 6 Piece NPT Pipe Tap Set in Wooden Case (1/4\

  • Carbon steel pipe taps are designed to clean and or re-thread damaged or jam pipe threads.
  • Also called 'pipe taps', National Pipe Taper (NPT) taps are appropriate for threading a wide variety of materials both ferrous and non-ferrous..
  • The nominal size of a Pipe Tap is that of the pipe fitting to be tapped, not the actual size of the tap..
  • The thread tapers 3/4 of an inch per foot. All Pipe Taps furnished with a 2-1/2 to 3-1/2 thread chamfer..
  • 6 Piece Set of Carbon Steel NPT Pipe Taps, Sizes /4.
Check Stock

Drill America - DWTPT1/8-1SET 6 Piece NPT Pipe Tap, Carbon Steel, DWTPT Series Set, 1/8\

  • Carbon steel pipe taps are designed to clean and or re-thread damaged or jam pipe threads.
  • Also called 'pipe taps', National Pipe Taper (NPT) taps are appropriate for threading a wide variety of materials both ferrous and non-ferrous..
  • The nominal size of a Pipe Tap is that of the pipe fitting to be tapped, not the actual size of the tap..
  • The thread tapers 3/4 of an inch per foot. All Pipe Taps furnished with a 2-1/2 to 3-1/2 thread chamfer..
Check Stock

GASHER 4PCS Metals Brass Pipe Fitting Hex Nipple Brass Tone 1/4 x 1/4 NPT Male Thread Pipe 1/4Inch x 1/4Inch NPT Female Thread Pipe

  • 1/4"Female NPT thread parts on both ends for connecting 1/4" Male NPT thread parts together,1/4" Male NPT threads for connecting to Female threaded....
  • Male and Female National Pipe Taper (NPT) threads for connecting two pipes.
  • The kit include: 2pcs x 1/4" x 1/4" NPT Male Nipple.
  • Durable solid brass construction is resistant to corrosion and long-lasting. Operating temperature range of -65 to +250 degrees F..
Check Stock

Parker Hannifin 12-12-12 FT-SS Stainless Steel Female Tee Pipe Fitting, 3/4\ FNPT x 3/4\ FNPT x 3/4\ FNPT

  • T-shaped pipe fitting for connecting and branching three pipes.
  • Female National Pipe Taper (NPT) threads on run and branches for connecting male pipes.
  • Made from stainless steel 316 for strength.
  • Higher corrosion resistance than stainless steel 304.
  • NPT thread for compatibility with other threads.
Check Stock

Midwest Hearth Poly Chimney Cleaning Brush (8-Inch Round)

  • POLYPROPYLENE BRUSH - Stiff poly bristles clean coal and soot from metal stove pipes, flue, and chimneys.
  • GALVANIZED STEEL STEM - Heavy duty double-spiral stem for long-lasting durability.
  • 1/4 INCH NPT FITTINGS - Features 1/4" male pipe threads for use with our fiberglass rod kits (sold separately).
  • PROFESSIONAL QUALITY - Superior components provide excellent performance.
  • MADE IN USA - Quality manufactured in the Midwest!Description Chimneys should be cleaned at least once a year, and more often if you use your fireplace frequently. Midwest Hearth Poly Chimney Brushes are designed to be used with metal chimney flue to help prevent scratching and marring of the steel pipe. Measure the inner diameter of your flue and order the same size brush: 6" Round or 8" Round. Our chimney brushes are professional quality and feature stiff polypropylene bristles and a heavy duty galvanized steel stem. The brush will have 1/4-Inch male pipe threads at the end that may be attached to extension rods. Midwest Hearth offers an 18-Foot fiberglass rod extension kit that is compatible with these brushes (sold separately)..
Check Stock

RIDGID 31115 Model 848 Aluminum Straight Pipe Wrench, 48-inch Plumbing Wrench

  • Professional strength aluminum pipe wrench is nearly 40% lighter than comparable same-size heavy-duty models with the same durability and ease of use.
  • Sturdy I-beam handle with full floating forged hook jaw for superior gripping and quick adjustments.
  • Aluminum pipe wrench features a non-stick adjustment nut, and self-cleaning threads with easily replaceable hook jaw, heel jaw and spring assembly.
  • Straight pipe wrench is suitable for all types of pipe work.
  • 48-inch (1200 mm) pipe wrenches are ideal for pipe diameters of 3 inch (80 mm) to 5 inch (125 mm) with a capacity of up to 6 inches (150 mm).
Check Stock