Top Pipes And Lines Grommets

Pipe Center Finder, Pipefitter Tools w/Centering Head, Pipe Fitting Tools Center Finder Tool to Measure Pipe Diameter Over 0.5" and Up, 4" Y-Type Base Fitted with Adjustable Dial Bubble Protractor.

  • 【Economical Measuring Tool】This Pipe Marker Centering Tool is efficient and useful for setting center lines, determining angles and marks for butt-ins and locating points inside pipes or tanks, arranging keyways and calculating declivity. It can measure tanks or pipes with a diameter of at least 1/2" or larger..
  • 【Easy to Operate】Step1.Loosen or tighten the hexagonal nut with the included hex key allen wrench. Step2.Place the pipe marker tool on the pipe and find the angle you want. Step3.Push the center column down to the fixed point position. Step4.Tap with a hammer to leave a fixed point mark on the pipe..
  • 【Durable and Sturdy Material】The pipe fitter tool can wrap around the circumference of pipes to measure and mark, and it is made of a highly flexible, heat-resistant gasket material. This Pipe Center Finder Tool is easy to use for pipe fitters and welders as a must have tool..
  • 【Y-Head Shape Base with a DSL】This safety pipe center finder has a 4 inch Y-type base fitted with an adjustable dial bubble protractor (DSL). You could push the center column down to the fixed point position as you want. It is a must have on your list of pipe welding tools..
  • 【Adjustable Dial Bubble Protractor】Printed with a scale in inches, an inch chart and....
Check Stock

Electric Water Pipe Heating Cable with Thermostat for Pipe Freeze Protection, 6ft 120V Snow De-Icing Cable with Build in Thermostat, Pipe Warmer, Heat Pipe Tape - CSA/ETL Listed

  • ✅ 003cb003e[100% Money-Back Guarantee] 003c/b003e--Customer satisfaction is our priority. If for any reason you're not completely satisfied, you can ask for a replacement or full refund, no questions asked. Buy with confidence!.
  • ✅ [High quality]--UL, ETL and CSA certified,more safer to use.Industrial grade heat shrinkage tube for connection.Each Cable consists of tough XLPE inner insulation, AL foil, a continuous ground braid as well as weather and non-supportive climatic conditions resistant PVC (high-low temperature) outer coating. Can convert 100% of electrical energy into heat without energy loss..
  • ✅ [Note]--Maximum 1/2 in fiberglass insulation was used over the heating cable for lower temperature protection. Pipes must be at least 3 feet and at least 3/8'' and less than 1 1/2'' in. diameter. No crossing. No spiral. No overlap itself. Only straight. If the ambient temperature is lower than -20°F(-29°C), please use 1" thick insulation material..
  • ✅ [Application]--Suitable for use on water filled plastic ((including PEX)and metal water pipes(including copper, galvanized, ABS plastic, PVC plastic pipes, etc).Not use for empty water pipes, fuel lines, hoses, gutters, steam lines and so on.Keeps water flowing down to -40℃..
Check Stock

Roebic K-77 Root Killer for Sewer and Septic Systems & K-97 Main Line Cleaner, Exclusive Biodegradable Bacteria Digests Paper, Fats, and Grease in Sewer and Septic Systems, 32 Ounces

  • Product 1: KILLS ROOTS IN SEWER AND SEPTIC PIPES: Roebic K-77 Root Killer clears existing roots and stops new growth fast from sewer and septic pipes, keeping lines free from clogging tree and shrub roots.
  • Product 1: PREVENTS RE-GROWTH: The K-77 copper formula chemically kills roots at the point of entry into pipes to prevent re-growth, improving drainage and flow.
  • Product 1: SAFE FOR ALL PLUMBING: Root Killer is non-corrosive and safe for all types of plumbing and will not harm surrounding trees, ground cover, or the natural bacteria content in septic tanks and cesspools.
  • Product 1: EASY TO USE: Use every 6 to 12 months.
  • Product 2: PREVENTS CLOGS AND BACKUPS: Roebic K-97 Main Line Cleaner naturally breaks down waste such as paper, sludge, fats & grease to quickly restore proper flow to your sewer lines or septic system.
Check Stock

Jackson Safety Flexible Wrap-A-Round Pipe Marking Tool, 6” to 16' Pipe Diameter, Gray, XXL, 14767

  • Function: An easy to use marking tool mostly used by pipe fitters and welders.
  • This is an economical tool used for marking straight lines around pipes or for use of a straight edge prior to welding or cutting.
  • Material: Available in gray and made from a flexible gasket material, this XXL Wrap-A-Round tool has a good resistance to low or high temperatures.
  • Measures: Printed with a scale in inches, an inch chart, tangent chart and other helpful markings to help you make straight lines around pipes.
  • This flexible tool has a marking scale from 5 " to 9’ and is designed for 6" to 16" pipe diameters.
Check Stock

Black Diamond Stoneworks GET SERIOUS Grease Trap Treatment Commercial Enzyme Drain Opener Cleaner Odor Control Trap Cleaning and Maintenance.

  • PROFESSIONAL STRENGTH Grease Trap Cleaner and Commercial drain opener..
  • SAVE MONEY & REPAIRS with GET SERIOUS Grease trap Treatment..
  • COMMERCIAL DRAIN CLEANER for slow draining sinks and lines. Keeps Grease Traps & Drains Flowing.
  • ENZYME DRAIN OPENER cleans the pipes before the grease trap, grease trap & pipes leaving the trap..
  • ELIMINATES OFFENSIVE ODORS Safe on Pipes & Plumbing..
Check Stock

OTC 6511 Fuel Line Disconnect Tool

  • COMPLETE: Our WINMAX tool set provides a comprehensive kit for separating standard sizes of automotive AC hoses and fuel lines, suitable for a large variety of domestic vehicles from Ford, Chevy, Dodge, and more.
  • Features: Removing and disconnecting tools for pipe connectors. For air conditioning, fuel,air and oil pipes. Fits nearly all brands Includes a variety of tools needed to quickly disconnect fuel and transmission lines for most vehicles..
  • Contents: For use with most fuel lines, air conditioning lines, radiator and heater hoses Strong, light and durable aluminum construction Simple push-on & pull-off action Popular sizes 3/16.
Check Stock

CLEANER MAIN LINE QT

  • Naturally breaks down waste that accumulates in pipes.
  • Digests paper, fats and grease in main sewage lines that cause sluggish flushing.
  • Ideal for low flow toilets that tend to accumulate sludge and paper due to reduced water.
  • Does not contain corrosive chemicals, safe for all pipes and the environment..
Check Stock

INTBUYING Hydroponic 10 Holes Grow Kit Plant Growing System for Leafy Vegetables Horizonal-2 Pipes 1 Layer

  • WATER TIGHT Rubber Grommets: in connections of DIY hydroponic systems, dutch buckets, dripping systems, siphon aquaponic systems and irrigation systems….
  • LEAK-FREE SEAL: Donut-shaped Rubber Grommets help transfer water or nutrient solution from one reservoir to another one with tubing and barded fittings or piping and 3/4 Inch Vinyl Tubing.
  • DURABLE: periodically replace worn old ones in existing hydroponic systems to ensure air and water tight seals in your hydroponic systems.
  • 3/4 inch Donut Rubber Grommet also goes with SCH40 1/2 inch PVC pipes or pipe's outer diameter matches grommet's inner diamete.
  • The inner diameter of rubber grommet is 3/4" but the drilled hole on the bucket it fits into will need to be 1-1/8 inch.
Check Stock

Spectre Performance 8711 Vacuum Sensor Adapter Kit

  • Attach vacuum lines almost anywhere on intake tube.
  • For use with our modular intake systems where vacuum hoses are required.
  • Includes 2 hole saws, 6 grommets and 10 fittings to fit all popular vacuum lines and air sensors.
  • Fits all popular vacuum lines and air sensors.
Check Stock

Voluntary Purchasing Group 40425 1.5Lb Root Killer, 1.5 lb

  • KILLS ROOTS IN SEWER AND SEPTIC PIPES: Roebic K-77 Root Killer clears existing roots and stops new growth fast from sewer and septic pipes, keeping lines free from clogging tree and shrub roots.
  • PREVENTS RE-GROWTH: The K-77 copper formula chemically kills roots at the point of entry into pipes to prevent re-growth, improving drainage and flow.
  • SAFE FOR ALL PLUMBING: Root Killer is non-corrosive and safe for all types of plumbing and will not harm surrounding trees, ground cover, or the natural bacteria content in septic tanks and cesspools.
  • REAL RESULTS: Use K-77 Root Killer to maintain your system and help avoid the inconveniences that result from root clogs such as back-ups and surface break outs.
Check Stock

HEATIT HISD 18-feet Pipe Heating Cable with Built-in Thermostat

  • Use for water filled plastic (including PEX) or metal pipes. Not use for anything else, like empty water pipes, fuel lines, hoses, gutters, steam lines and so on. Two year limited quality . If you are not completely satisfied with HEATIT heating cable, please don’t hesitate to contact our customer service in any time, we’ll try our best to solve your issues..
  • Pre-assembled easy to install. Including grounded plug with light, built in thermostat, and instructions. Easy to install and use. 120 volt, 7 watts/ft. Built in thermostat to turn the cable 37F on 50F off. Energy saving. 100% screen rate with the Aluminum foil and tinned copper braid..
  • Both CSA and ETL approved. Industrial grade heat shrinkage tube for connection. Tough XLPE as inner insulation and weather resistant PVC (high-low temperature) as out jacket..
  • Maximum 1/2 in fiberglass insulation was used over the heating cable for lower temperature protection. Pipes must be at least 3 feet and at least 3/8” and less than 1 1/2” in. diameter. No crossing. No spiral. No overlap itself. Only straight..
  • Testing the cable before the installation. Uncoil the cable, plug in the heating cable and then put the thermostat part of the cable into an ice bucket for few minutes. When t....
Check Stock

HEATIT HISD 15-feet Pipe Heating Cable with Built-in Thermostat

  • Use for water filled plastic (including PEX) or metal pipes. Not use for anything else, like empty water pipes, fuel lines, hoses, gutters, steam lines and so on. Two year limited quality . If you are not completely satisfied with HEATIT heating cable, please don’t hesitate to contact our customer service in any time, we’ll try our best to solve your issues..
  • Pre-assembled easy to install. Including grounded plug with light, built in thermostat, and instructions. Easy to install and use. 120 volt, 7 watts/ft. Built in thermostat to turn the cable 37F on 50F off. Energy saving. 100% screen rate with the Aluminum foil and tinned copper braid..
  • Both CSA and ETL approved. Industrial grade heat shrinkage tube for connection. Tough XLPE as inner insulation and weather resistant PVC (high-low temperature) as out jacket..
  • Maximum 1/2 in fiberglass insulation was used over the heating cable for lower temperature protection. Pipes must be at least 3 feet and at least 3/8” and less than 1 1/2” in. diameter. No crossing. No spiral. No overlap itself. Only straight..
  • Testing the cable before the installation. Uncoil the cable, plug in the heating cable and then put the thermostat part of the cable into an ice bucket for few minutes. When t....
Check Stock