Top Pipes Fittings

Fleetwood Mac Greatest Hits

  • Effectively removes oil, grease, and dirt from the surfaces of all sizes, classes, and schedules of PVC, CPVC, ABS, and styrene.
  • Designed for use before the application of Weld-On pipe primers and solvent cements.
  • Ensure the strongest bond possible between pipes and fittings by preparing your surfaces.
  • Low-VOC content minimizes environmental impact and helps improve crew working conditions.
  • May be used on FlowGuard Gold pipes and fittings.
Check Stock

NIBCO C4806 2 HXH 45 ELBOW PVC White, 2 Inch

  • 45-degree elbow for connecting two pipes at an angle.
  • Hub ends for connecting to male unthreaded pipes or fittings.
  • PVC-DWV for corrosion resistance, high strength, and less weight than fittings made from metal.
  • Smooth interior finish for reduced friction and material buildup.
  • Meets specifications ASTM D2665 and D3311 for quality assurance.
Check Stock

Legines Brass Pipe Fitting Long Nipple, 1/8' NPT Male x 1/8' NPT Male Extender Straight Connector, 1-1/2'Length 1200psi (Pack of 5)

  • Long nipple for connecting two threaded pipes and extending pipe length.
  • 1/8" Male National Pipe Taper (NPT) threads for connecting to 1/8" female threaded pipes.
  • Legines pipe fittings are made of CA360 or CA377 brass, not ordinary copper alloy, and meet SAE standard, have dryseal threads, forgings & extruded..
  • Operating pressure of our fittings is up to 1200psi, more higher than other general fittings. Temperatures range from -53 to 121 degrees C (-65 to 250 degrees F).
  • These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories..
Check Stock

Pipe Décor Desk Outside Leg, Authentic Industrial Pipe, Unfinished Dark Grey Black Steel for Rustic Look, for Classic H Design Desks or Tables, 28.75-in H x 21.5-in, 1-in Diameter, 1-Pack

  • flange specs 3.5-in diameter, assembled leg specs 28.75-in tall and 21.5-in wide.
  • Includes 1 “H” table leg comprised of (2) 1-in x 8-in pipes, (2) 1-in x 18-in pipes, (1) 1-in x 16-in pipe, (4) 1-in round flanges, (2) 1-in tees, (8) screws, instructions, and a clean and seal sheet.
  • pipes and fittings are industrial grade black steel and malleable cast iron.
  • standard steel grey color, commonly known as black within the plumbing industry.
  • PIPE DECOR genuine industrial pipes and fittings will stand the test of time.
  • You will know Pipe Décor parts and accessories when you hold them, beauty and beast, strength and style.
  • easily customize your PIPE DECOR projects with our many sizes of pipes and fittings.
  • PIPE DECOR pipe and fittings are coated with a light industrial grease to prevent rusting.
  • we highly recommend that you clean and seal each piece, before assembly, to ensure that they stay rust-free.
  • sealing the pipe with polyurethane spray will protect it from rust and scratches.
Check Stock

NIBCO U4810 11/2 HXHXH 45 WYE PVC White, 1.5 Inch

  • Wye with three openings for connecting and branching three pipes.
  • Hub ends for connecting to male unthreaded pipes or fittings.
  • PVC-DWV for corrosion resistance, high strength, and less weight than fittings made from metal.
  • Smooth interior finish for reduced friction and material buildup.Lead Free.
  • Meets specifications ASTM D2665 and D3311 for quality assurance.
Check Stock

NA Black Hydra Krimp 71500 AC Hose Crimper

  • The lightweight hand-held hydraulic press is very portable..
  • Crimping pipes and fittings in an easy and labor-saving way..
  • The kit is applicable for beadlocking fitting and barrier A/C hose..
  • The dies snap quickly into the press fixture requiring no pins or screws..
  • Wide Application: The hydraulic crimper is ideal for shop and field operations, crimping pipes and fittings in an easy and labor-saving way. Customize....
Check Stock

NIBCO C4804 2 HXMIPT MALE ADAPTER PVC, White, 2' (C48042)

  • Adapter for connecting pipes or fittings of different types.
  • Hub opening on one end and male National Pipe Taper (NPT) threads on the other for connecting two pipes with different ends.
  • PVC-DWV for corrosion resistance, high strength, and less weight than fittings made from metal.
  • Smooth interior finish for reduced friction and material buildup.
  • Meets specifications ASTM D2665 and D3311 for quality assurance.
Check Stock

Spears 406-020 PVC Pipe Fitting, 90 Degree Elbow, Schedule 40, White, 2' Socket (Pack of 5)

  • Elbow for connecting two pipes or fittings at a 90-degree angle.
  • Socket ends for connecting two unthreaded pipes or fittings.
  • PVC for chemical and corrosion resistance, strength, and light weight.
  • Maximum operating temperature of 140 degrees F.
  • Meets ASTM D1784 and D2466 standards for quality assurance.
Check Stock

Spears 829 Series PVC Pipe Fitting, Coupling, Schedule 80, 1-1/4" Socket

  • Coupling for connecting two pipes with the same diameter in a straight run.
  • Socket ends for connecting to male pipes or fittings.
  • PVC for chemical and corrosion resistance, high strength, and less weight than fittings made from metal.
  • Maximum operating temperature of 140 degrees F.
  • Meets ASTM D1784 and D2467 standards for quality assurance, and certified by NSF International for potable water service.
Check Stock

NIBCO - K09825CA C4811 2 HXHXH SANITARY TEE PVC, White, 2 Inch (C48112)

  • Tee with three openings for connecting and branching three pipes.
  • Hub ends for connecting to male unthreaded pipes or fittings.
  • PVC-DWV for corrosion resistance, high strength, and less weight than fittings made from metal.
  • Smooth interior finish for reduced friction and material buildup.
  • Meets specifications ASTM D2665 and D3311 for quality assurance.
Check Stock

Spears 461 Series PVC Pipe Fitting, Adapter, Schedule 40, 2' NPT Male x 2' Spigot

  • Adapter for connecting pipes or fittings of different types.
  • Male NPT threads on one end and spigot connection on the other for connecting two pipes with different ends.
  • PVC for corrosion resistance, high strength, and less weight than fittings made from metal.
  • Smooth interior finish for reduced friction and material buildup.
  • Meets NSF/ANSI 61 Annex G, NSF/ANSI 372 for quality assurance.
Check Stock

PC Products PC-Plumbing Epoxy Putty, 2oz Stick, Gray (25598)

  • Fast curing epoxy stick for plumbing repairs. Works on copper, PVC and steel pipe and fittings.
  • Approved repairs to pipes and fittings carrying potable water.
  • return to service in less than 60 minutes.
  • continuous service temperature range from -20 to 250 degrees F.
  • Epoxy putty for rapid sealing in plumbing applications such as repairing leaking pipes, tanks, and valves.
  • Hand moldable without need for mixing or application tools.
Check Stock