Top Piston Rod Valve Body

Longray SP4A Stainless Steel Sprayer, 1 Gallon, Metallic

  • 【All Stainless Steel Structure】- the pump, box, cover, rod, pump handle and rod handle are all made of durable stainless steel. Braided durable hose， not cheap plastic - with Viton seals and gaskets.
  • 【HAND-PUMPED SPRAYER】- This sprayer boasts large flow piston rod with humanized handle, it is designed for easy use and also for quickly building up air pressure with no need for outlet or extension cord.adjustable spray is perfect for misting.
  • 【WIDE-MOUTH WATER INLET】- This sprayer boasts valve and pressure gauge that can provide convenience and ensure safety.Large Wide Mouth opening allows for easy filling and cleaning and less spilling..
  • 【FOR MULTI-PURPOSE】- Built-in fast and accurate pressure gauge, suitable for the actual needs of industry, agriculture, commerce and medicine.
  • [Note]-We provide 1 gallon 1.5 gallon 2.5 gallon 3 gallon 3.5 gallon stainless steel sprayer, blue film, the film is scratch-resistant and does not need to be torn.
  • the liquid is on the piston rod, only hydraulic spraying is required.
Check Stock

304 Stainless Steel Balanced Float Ball Valve Tank Mount 100 Psi 1 inch NPT Male…

  • Balance pressure between piston and Valve, as well as smaller ball and shorter rod can bear high pressure..
  • Adjustable water level. Ball valve is used in pipelines to cut off, distribute and change the flow direction of the medium Widely used in magnetic level switch and liquid level measurements..
  • Made of 304 stainless steel. Its applicable medium is water, can withstand wide temperature of -10℃ to 120℃.
  • Stainless Steel Rod for Float Valve, 1/4" thread, 6.3" Length, and 4" Stainless Steel Float.
  • Works great for water trough, water pump, humidifier, fountain, aquarium, pond, chicken/dog/horse/cattle waterer, etc.
Check Stock

ZKTOOL 11PC Compression Tester, Automotive Engine Compression Tester Adapter Kit, Engine Cylinder Leak Down Compression Test Motor Pressure Gauge. (All Vehicles).

  • Function: The cylinder compression tester kit is used to quickly and accurately test the cylinder pressure of gasoline engines. Meter readings can help diagnose the following problems: stuck valve, carbon deposits, cracked cylinder head or defective main gasket, poor or worn piston ring installation, burned or damaged piston..
  • Packing: Including 10 connection adapters --- 11-in-1 engine tester gauge kit including 1 piece spring buckle gauge.
  • 5-piece brass adapter M10, M12, M14, M16, M18, widely used.
  • a 200mm metal Extension rod connector, two 50mm metal aluminum rod straight and bent rod, an extension rod hose with M12*1.25 thread..
  • Application: Gasoline engine cylinder --- equipped with different sizes of rotating and push-in adapters, widely used in most types of gasoline gasoline gas engine cylinders and deep spark plugs, common in motorcycles, lawn mowers, cars, trucks, ATV and many more. Not suitable for diesel engines..
  • Stable quality tester: Maximum 300PSI or 20BAR dual pressure device, with easy-to-read large dial, acrylic glass meter cover with scratch-resistant coating and rubber protective cover with excellent shock absorption performance. The built-in one-way valve with pressure holding function ensures that the pressure gauge obtains the ma....
Check Stock

Oil Pressure Shock Absorber, Black M14 x 20mm Stroke for Pneumatic Air Cylinder AC1420-2

  • 【SELF-PRESSURE-REGULATION】M14 air cylinder shock absorber has a soft shock absorbing effect because the self-pressure-regulation function..
  • 【REDUCE SHOCK &NOISE】Industrial shock absorber can reduce shock and noise,improve the stability in automated mechanical operations, enhance working efficiency..
  • 【RESET PISTON ROD FAST】The spring inside can reset the piston rod fast cause the perfect movement of the check valve..
  • 【HIGH QUALITY】Shell is made of high quality alloy and stainless steel, good damping, high hardness and strong heat resistance..
  • 【OIL PRESSURE SHOCK ABSORBER】Length: Approx. 12.6cm / 4.96inch, Thread: M14, Stroke: 20mm, Allowable speed: 0.8-3m/s..
Check Stock

COMP Cams 159 Engine Break-In Oil Additive, 12 oz. Bottle

  • Improves surface mating of rotating assembly, rod journals, piston rings, valve guides, cam and lifters, etc..
  • Protects all internal engine components, including flat tappet and roller valve trains.
  • Proprietary additive package includes optimum amounts of ZDDP (Zinc and Phosphorus), Molybdenum and detergents.
  • Requires no additives or supplements for maximum protection.
  • Fully compatible with gasoline, methanol and high octane race fuel.
Check Stock

ABS Balanced Float Ball Valve, 100 psi Pressure, 3/4 inch PT Male

  • Balance pressure between piston and Valve, as well as smaller ball and shorter level can bear high pressure..
  • adjustable arm with over 180 degrees of adjustment range..
  • Stainless Steel Rod for Float Valve, 1/4" thread, 6.3" Length, and 4" PE Float.
  • Works great for water trough, water pump, humidifier, fountain, aquarium, pond, chicken/dog/horse/cattle waterer, etc.
Check Stock

WY-YAN HZR Air Compressor Pressure Switch Control Valve Regulator with Gauges

  • Piston seal adopts v-type sealing ring, good sealing, wear-resistant and stable..
  • Piston structure, the flow rate is 30% higher than that of traditional diaphragm type..
  • The valve body structure has overflow port, for fast pressure reduction.
  • Air compressor pressure valve switch features high accuracy and quick response.
  • Small size, light weight, and easy to install.
Check Stock

INTBUYING Time Clock Control Valve for Water Filter Softener Resin Tank 9''-11'' Diameter

  • Widely used in pure water, beverages, boilers, electronics, chemicals, pharmaceuticals and other industries..
  • This is an automotic control valve in water processing system..
  • The valve body material is engineering valve body material plastic.
  • There is a hard water bypass during regeneration, and an external valve is required to block the hard water bypass..
Check Stock

Hydraulic Top Link Cat 1-1 with Locking Block 18 1/8” - 26 3/8” with 2 x Hose

  • Including Hoses, Male Couplers with dust cover, Banjo Bolts,Washers.
  • Holder to hold the unit when it is un-used.
  • This top link is equipped with a locking block. With this valve, the oil is enclosed in the cylinder by a check valve.
  • Painted Black Color (Rarely paint damages & Scratches during cargo).
Check Stock

Allstar ALL96478 Engine Connecting Rod and Piston Holder , Black

  • Engine connecting rod and piston holder measures 24 inch long x 12 inch wide x 9-1/2 inch tall.
  • This combination rod and piston holder safely supports piston and connecting rod assemblies during engine teardowns or assembly.
  • Slots are 4-3/4 inch long x 1-1/2 inch wide to accommodate most piston/rod combinations.
  • Assembly is required and can also be disassembled if desired after use for easy storage.
Check Stock

ReRing Kit w/Full Gasket Set Rings Bearings FITS: 1968-1987 Ford Truck 300 4.9L OHV Straight-6

  • This re-ring kit has all the parts you need to freshen up that worn engine. These parts are manufactured directly from only high quality companies with ISO, QS & TS quality systems in place. These are not cheap Chinese parts, this is a quality kit that will last..
  • This re-ring kit will include: Full Gasket Set, Premium Piston Rings, Rod Bearings, Main Bearings, Valve Stem Seals.
  • SIZES AVAILABLE: Piston Rings:STD, 020, 030, 040, 060 --- Rod/Main Bearings:STD, 010, 020, 030, 040.
  • AFTER YOU ORDER YOU NEED TO SEND US A MESSAGE LETTING US KNOW WHAT SIZE OF PARTS YOU WANT. THANKS!.
  • The pictures are accurate and show you the actual parts that you will be buying. Because of limits, sometimes not all the parts are pictured, but we always try to supply pics of the main pieces. If you have any other questions, feel free to send us a message, and we can usually get back to you within 1 business day. Thanks!.
Check Stock

ReRing Kit w/Full Gasket Set Rings Bearings FITS: 1988-1995 Ford Truck 300 4.9L OHV Straight-6

  • This re-ring kit has all the parts you need to freshen up that worn engine. These parts are manufactured directly from only high quality companies with ISO, QS & TS quality systems in place. These are not cheap Chinese parts, this is a quality kit that will last..
  • This re-ring kit will include: Full Gasket Set, Premium Piston Rings, Rod Bearings, Main Bearings, Valve Stem Seals.
  • SIZES AVAILABLE: Piston Rings:STD, 020, 030, 040, 060 --- Rod/Main Bearings:STD, 010, 020, 030, 040.
  • AFTER YOU ORDER YOU NEED TO SEND US A MESSAGE LETTING US KNOW WHAT SIZE OF PARTS YOU WANT. THANKS!.
  • The pictures are accurate and show you the actual parts that you will be buying. Because of limits, sometimes not all the parts are pictured, but we always try to supply pics of the main pieces. If you have any other questions, feel free to send us a message, and we can usually get back to you within 1 business day. Thanks!.
Check Stock