Top Plastic Air Pipe Fittings

Class A Customs | T-4000-BPK| 40 Gallon Fresh Water Tank & Plumbing Kit RV Concession

  • 40 Gallon Fresh or Gray Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe - Can be used for Fresh or Gray Water Storage.
  • WATER TANK MEASUREMENTS: 39 1/2” Longest Length (not including fittings) x 13” x 18” - Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement).
  • TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and watertight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT over-tighten fitting damage will occur, use plastic connecting fittings as metal will damage threads..
  • NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
  • BASIC PLUMBING KIT INCLUDES - (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adaptor (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adaptor (TWO) 1.5” Hose Clamps (ONE) 1.5” Male Pipe....
Check Stock

Class A Customs | T-3000-BPK| 30 Gallon Fresh Water Tank & Plumbing Kit RV Concession

  • 30 Gallon Fresh or Gray Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe - Can be used for Fresh or Gray Water Storage.
  • WATER TANK MEASUREMENTS: 34 1/2” Longest Length (not including fittings) x 12” x 17 1/2” - Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement).
  • TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and watertight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT over-tighten fitting damage will occur, use plastic connecting fittings as metal will damage threads..
  • NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
  • BASIC PLUMBING KIT INCLUDES - (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adaptor (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adaptor (TWO) 1.5” Hose Clamps (ONE) 1.5” Male ....
Check Stock

MUNTE - SS304 Stainless Steel Female Threaded 3 Way Tee T Pipe Fitting 1/8" 1/4" 3/8" 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" BSP Threaded (1")

  • Pipe Fittings and Tools include: Pipe fittings,copper pipe fittings, black iron pipe fittings, water pipe fittings, stainless steel pipe fittings, cpvc pipe fittings, iron pipe fittings, ABS pipe fittings, RV pipe fittings, Pipe fitting tools, PVC pipe fittings, PE pipe fittings..
  • Metal pipe fittings, Stainless steel pipe fittings, Socket, Female socket, Male socket, Wye, Tee 90, Elbow 90, Elbow 45, Reduced valve, Female elbow 90, Male elbow 90, Reduced tee, Reduced bush, cleanout, End Cap, PVC solvent cement, Clamp saddled, Flange, Steel backing ring, Adaptor, P trap with cleanout plug, Gasket, Valve.
  • Products are well manufactured, durable and have a long life, easy to disassemble and move during use..
  • Excellent quality, fast delivery, good after-sales. We promise to do everything in our power for you to be 100% satisfied.
Check Stock

Brass 1/4 Barb X 1/4 NPT Male End Air Hose Pipe Fitting Threaded Connector Adapter Pack of 12

  • ✅ Function -- Barb head for connecting hoses, NPT end used to connect NPT pipes. Air hose pipe can apply to water, gas, oil and fuel as well as air tools..
  • ✅ Premium material -- Brass barbed hose fitting is made of high quality solid brass, firm and durable, providing high resistance to abrasion and corrosion. Solid brass hose barb can withstand up to 100 °C (212 °F)..
  • ✅ Durable -- Air hose fittings is not a cast product and has a thick wall, providing a longer service life than iron and iron galvanized pipe fittings..
  • ✅ Superior threads -- Deeper and smoother threads with barbed edges provide effective connection..
  • ✅ CUSTOMER SERVICE -- Professional factories produce brass air line fittings. Every detail reflects a strong texture performance. Fast Delivery and 30 Days Free Refund..
Check Stock

FORMUFIT 3/4\ PVC Fittings, 3-Way Corner Connector, Furniture Grade, Orange (8-Pack) - for Greenhouse, PVC Pipe Furniture, Maker Projects | Fits 3/4 inch PVC Pipe - F0343WE-OR-8

  • EASY TO USE: The FORMUFIT PVC 3-Way Corner Fitting is the fastest and most effortless way to build structural PVC projects with 3/4" PVC pipe. With these PVC fittings (3/4 inch), you can make cubes, PVC pipe furniture, boxes, or right-angle configurations which require a corner or three-point connection. This PVC 3-Way Connector has three (3) extra-deep sockets on separate planes at 90 degrees to each other..
  • GENUINE FURNITURE GRADE PVC: FORMUFIT 3-Way PVC Corner fittings are 3/4" PVC fittings that are injection-molded using ultra-strong, premium furniture grade PVC resin.
  • a superior engineered plastic designed for outdoor use, weatherability, and can be used in direct sunlight. UV resistance maintains fitting durability and appearance through years of exposure to varying weather conditions. In addition, this 3/4" PVC elbow has an impact strength that is five times as strong as other PVC pipe connectors due to the formulated impact modifiers..
  • SAFE AND NON-TOXIC: FORMUFIT 3Way PVC Fitting products are approved for fluid handling in hydroponics, aquaponics, residential irrigation, and aquarium use. These 3/4" PVC pipe fittings do not contain heavy metals, off-gassing phthalates, dioxins, or calcium cobalt filler as seen in imported, imitation/look-a-lik....
Check Stock

Male Branch Tee Push to Connect Air Line Fittings 1/4 Plastic Plug Tube OD x 1/8 NPT Thread Quick Release Connectors 3 Way Union Fitting Pack of 10

  • Male Branch Tee Push to Connect Air Line Fittings 1/4" Tube OD x 1/8" NPT Thread Quick Release Connectors 3 Way Union Fitting.
  • Type: Male Branch Tee 1/4" Tube Od x 1/8" NPT Thread Push to Connect Pneumatic Air Tube Fittings..
  • High Quality Material: The connector made of high quality plastic and stainless steel.
  • corrosion resistance, ductility, hundreds of tests, durable, no air leakage..
  • Push-To-Connect Fittings: Maximum Pressure 0~145Psi.
  • Components: Male branch tee fitting is used to branch line from female thread in both 90°directions. 360°rotation, after installation, the tube direction can be changed easily. Easy to insert or pull the trachea by hand without the aid of a tool..
Check Stock

Class A Customs | Under Mount 20 Gallon RV Concession Fresh and Gray Water Holding Tank & Plumbing Kit UM-2000-BPK

  • 20 Gallon Fresh or Gray Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe - Can be used for Fresh or Gray Water Storage.
  • WATER TANK MEASUREMENTS: 48” Longest Length (not including fittings) x 8.5” x 13” - Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement).
  • TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and watertight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT over-tighten fitting damage will occur, use plastic connecting fittings as metal will damage threads..
  • NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
  • BASIC PLUMBING KIT INCLUDES - (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adaptor (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adaptor (TWO) 1.5” Hose Clamps (ONE) 1.5” Male Pipe Th....
Check Stock

CEKER 1/2 Npt Elbow Push to Connect Fittings 3/8 inch Tubing to 1/2 npt Airline Push Fittings 3/8 Push in Connectors Quick Connect Air Tube Fittings 90 Degree Pneumatic Fittings 2Packs

  • Type:3/8 Od x 1/2" Npt Thread Push to Connect Fittings.
  • Made of quality plastic and stainless steel.
  • 3/8 Od Air Fittings Fluid Admitted: Air, Water (No Freezing).
  • Working Temperature: 0-60°C | 32～140°F.
  • The 1/2 Airline Push fittings are available in various styles and models ,All models of push in connectors are designed to suit your pneumatic piping needs perfectly.
  • Easy to install to 3/8 OD tubing and removed, even can change the tube connector direction after installation easily,360-degree rotate freely.
  • The release ring of Pneumatic Air Tube 3/8 od Fittings conforms with the ellipse design to ensure that the disconnecting unit is in good shape.
Check Stock

TIRDITY 3/4\ Pipe Fittings - 24 Pack 3/4 Inch Black Floor Flange Elbow Tee Combo | Malleable Cast Iron Vintage Furniture Grade Threaded Pipes for DIY Industrial Shelves, Pipe Shelving, Steampunk Decor

  • 【 3/4" INCH ELBOW TEE COMBO PACK 】Our industrial pipe fittings 3/4 malleable iron threaded elbow/tee combo/pipe flange pack provides you the great floor flange pipe fittings at a reasonable price. Malleable cast iron pipe fittings can decorate your home or store more elegant and functional..
  • 【 PIPE INDUSTRIAL DECOR 】You can use these black malleable pipe fittings to install durable iron frame for your pipe furniture, pipe clothing racks, pipe shelving, pipe table legs, wall lamp or other industrial home decors. When you prefer an industrial, steampunk, vintage, retro, factory look, our decorative black pipe fittings are the way to go. Threaded pipe fittings are built to fit your household with an industrial, rustic style. Our black steel pipe fittings will definitely satisfy you..
  • 【 EASY TO INSTALL 】These metal cast pipe fittings are threaded, just screw the threaded rods or pipes to the tees and elbows and they will hold forever. No screws needed to install steampunk pipe fittings. Easy to install, no DIY difficulties to connect Pipe furniture fittings. You will love black iron pipe connectors..
  • 【 MATERIAL OF RAW IRON 】Since threaded metal pipes are unprocessed cast iron parts, we strongly recommend you to clean and seal each part of bl....
Check Stock

TAISHER 2PCS Forging of 304 Stainless Steel Compression Tube Pipe Fitting Connector 1/4 Tube OD x 1/4 NPT Male Straight Adapter

  • Widely used ——This pipe fitting is suitable for fuel/air/liquid/oil/gas/vacuum pipelines, with good air tightness, pressure resistance, and not easy to trip.
  • Product Material —— Forging of 304 stainless steel strength and resistance to corrosion..
  • Working Temperature —— Temperature range from -868 to 1472 degrees F/-500 to 800 degrees c..
  • Maximum Pressure —— Maximum working pressure is 2800PSI..
  • Function —— Fittings for connecting and extending stainless steel, copper, rigid and semi-rigid plastic pipes of the same diameter, hex nut construction creates a tight seal, one end is connected to the pipe and the other end is an NPT male connector.NPT thread size is not the actual diameter, it is only the nominal pipe size..
Check Stock

Joywayus Hex Nipple 1/2' Male x 1/2' Male Threaded Stainless Steel 304 Threaded Nipple Pipe Fittings for Brew Kit Home Piping (Pack of 5)

  • 【Size】1/2" Male x 1/2" Male Thread. Tapered thread. Pipe fittings are components used for connecting, terminating, controlling flow, and changing the direction of pipe..
  • 【High Quality Material &Threads】Made of quality stainless steel 304, durable and sturdy corrosion resistance, ductility at high temperatures, and low magnetic permeability. High quality and deep threads allow the fittings to bite better, tight threads, not easy to slip..
  • 【Hex Nipple】The hex nipple fitting is a short length of pipe with threaded ends for connecting threaded pipes, and it has a hexagonal section in the middle for an increased bearing surface when adjusting the fitting with a wrench..
  • 【Operating temperature range】Temperature rating: -65 to 250 degrees F.
  • 【Widely Applications】Male threads for connecting to female threaded pipes, this premium pipe fitting can be used to connect various pipes, such as air pipe, fuel pipe, water pipe as well as air tools.
  • it can also be used with grease, fuels, LP and natural gas, refrigeration, instrumentation and hydraulic systems in low and medium pressure pipe line connections..
Check Stock

Permatex 80632 Thread Sealant with PTFE, 4 oz. , White

  • Economical general-purpose fitting sealant.
  • Seals and resists pressure in air, oil, diesel fuel and hydraulic systems.
  • Remains pliable at higher and lower temperatures.
  • Suggested Applications: Air conditioning fittings, temperature sending fittings, hydraulic fittings.
Check Stock