Top Plastic Engraver Tools

US Stock 50W JPT Fiber Laser Engraver Equipped 80mm Rotary Axis,175mm (6.9in) Lens Laser Marking Engraving Machine fits Gun/Pistol/dogtag/Jewelry

  • ⚡USB WIRELESS ENGRAVER⚡:These engraving tool equiped with Lithium battery and rechargable by USB interface. Cordless using will be up to 30 minutes idling after full charge. Easy to help you finish better engraved craft..
  • ⌚VISIBLE SPEED ADJUST⌚:Metal engraver pen equips with qualify motor. 3 position adjust rotation speed from 5000-25000 r/min to apply different situations. The lowest speed will let you polishing your nail in safe, the highest speed are also working on metal carving..
  • VARIOUS GRINDING BITS: these metal engraving machine kit include 30pcs rotory bits,2 drill bits, 3 saw blades, all these bits are enough to work on engraving, carving, sanding, polishing, etching, routing, grinding, drilling, cutting..
  • BEGIN ENGRAVED ART NOW:these portable and compact etching pen are convience to take anywhere you want and allow you enjoy relaxing hand drill jewelry making time. It can work on metal, glass, ceramic, leather, wood,jewelry,stone or statue..
  • BEST CHOICE FOR BEGINNER:Our metal engraver tools are easy to operate,Create a keychain,DIY a necklace or send gift wi....
Check Stock

Dremel 9929 Rotary Tool Engraver Bit with Diamond Point- Perfect for Engraving Metal, Glass, and Wood, Grey , Gray

  • Engrave, decorate, or personalize a wide variety of materials - from metal to plastic to wood and leather using the Dremel 290 Engraver.
  • Dremel 9929 Diamond Point accessory is for use with the 290 Engraver and is ideal for decorative engraving and personalization on hard surfaces.
  • 9929 Diamond Point works best on steel, chrome, titanium, granite, and other hard substrates.
  • USA-BASED CUSTOMER SERVICE – Available by chat, email, phone or visit us at our service center in Racine, WI..
Check Stock

ENJOYWOOD CEL-E10 Laser Engraver, 50W Laser Engraving Cutting Machine,10-15W Laser Output Power Laser Engraving Machine,0.06 * 0.06mm Double Compressed Spot Laser Engraver for Wood and Metal Etc

  • Double Compression Spot Coupling Technology: laser engraver laser power is 10-15W, ultra fine compressed laser spot is reduced to 0.06*0.06mm, Other 10W Machine laser focus area is 0.06*0.08mm. The smaller the laser spot, the greater the energy of the laser. Laser could control laser beam more accurately to 0.01mm. Cutting and engrving more precision..
  • Fast Engraving and Cutting: The laser engraving machine burning Temperature is up to 1200℃. Engraving & cutting speed is 300% higher than that of ordinary models.Engraving speed up to 11,000mm/min.ENJOYWOOD laser engraver with 50mm focal length, Cutting depth increased by more than 20%,Other 10W Machine With 30mm focal length..
  • Vivid Colors Engraving: Power 10-15W optical power can oxidize the metal surface. Oxidized metals exhibit rich colors.By controlling the speed, power and line spacing you can have color laser engraving..
  • The New Filter Panoramic Glass Eye Protection Design: Plays a very good role in protecting your eyes, filtering 97% of the ultraviolet light, you do not need to wear goggles, you can also watch laser engraving. The emergency stop button and reset switch are more convenient and safe to use.Wide Compatibility: LaserGRBL, LightBurn, support Win XP / Win 7 / Win 8 / XP / Win 10, supp....
Check Stock

1500mw Blue Laser Diode Engraving Emitter Blue-violet Laser Diode Head Dot for NEJE 1500mW Engraver Only

  • Design for engraver printer machine, suitable for NEJE 1500mW engraver only..
  • 1500mW blue-violet light laser, higher speed, support more types of materials..
  • Can be carved items included hardwood, plastic, bamboo, rubber, leather, cut paper and so on..
  • Long time use, carving time will last much longer than other laser head and more stable..
  • Note that laser is dangerous, it is necessary to use laser protective glass to avoid eyes injuries..
Check Stock

HARDELL Engraver,5 Speed Etching Power Tool Equipped with Soft Rubber Handle and Tungsten Carbide Steel Bits,Mini Multi-Function Engraver for Tile,Metal,Stone,Wood,Leather,Glass,PVC Pipe,DIY Crafts

  • 【Ergonomic Designed Handle】Multi-function Engraver designed with Soft Rubber Handle ,easy to handle and works,making it comfortable to use and control without getting blisters.
  • 【5-Speed Power Engraver】 The variable speed Engraver can adjust 5 different speed at 6000/min strokes to meet your different needs .The power Etching tool is a perfect gift for hand maker , Christmas , Birthday ,Thanks Giving Day ,Father's Day.
  • 【Engraver with LED Indicator】Powerful but small Engraver has a blind spot lighting LED design. Reduce backlight shadows and overcome the adverse effects of dark areas on the use of carving, provide you with a better experience.
  • 【Perfect DIY Tool】The carved line of high-performance Multipurpose Engraver is coherent and steadier suitable for Tile,Metal （Not for hardened steel）,Stone,Wood,Leather,Glass,PVC Pipe,DIY Crafts, The marks which you engrave can be personally , you can own your own Logo.
  • 【Portability】Comfortable pen-size design of small engraver tool gives you more freedom while operating,Easy to carry and can use it at anywhere you want, please wear your hearing protection equipment during use..
Check Stock

LiebeWH 1pc Laser Diode Head Engraving Emitter Blue-violet Light for NEJE 1000mW Engraver Only to Avoid Eyes IAnjuries

  • 【Professional design】Design for engraver printer machine, suitable for NEJE 1000mW engraver only.
  • 【High-quality】Long time use, carving time will last much longer than other laser head and more stable.
  • 【Features】1000mW blue-violet light laser, higher speed, support more types of materials.
  • 【Appropriate types】Can be carved items included hardwood, plastic, bamboo, rubber, leather, cut paper and so on.
  • 【Supplement】Note that laser is dangerous, it is necessary to use laser protective glass to avoid eyes injuries.
Check Stock

Electric Engraving Machine Mini DIY Etcher Engraving Carve Machine Tool Kit with Diamond Tip Bit to Engrave on Metal Glass Ceramic Plastic Wood Jewelry Stone

  • ▲Smooth to control. Perfect for beginners and expert technicians. This engraver makes steady, easy lines and writes like a pencil. Our engraving device permits precision cordless engraving with permanent identifying markings by everyone..
  • ▲Infinite possibilities. Its programs include engraving tools, carrying goods, toys, smartphone chargers, and the sensitive personalization of jewelry, watches, and glassware. Also practical as a timber engraver, or a part of a metal engraving package.
  • ▲Fantastic nice. This electric-powered engraving gadget has a high pace 18,000 RPM jap motor. It's far sturdy sufficient to engrave steel..
  • ▲Properly overview. 6 months guarantee..
  • ▲This is a should have device for anyone. Best present for DIY..
Check Stock

xTool D1 36w Higher Accuracy Laser Engraver with Material Box, 5w-7.5w Laser Cutter and Engraver Machine, Support LightBurn, Laser Engraver for Wood and Metal, Vinyl, Acrylic, Paper(17'x15.98')

  • 【Finer Details by 0.08*0.08mm Ultra-fine Compression Spot】xTools D1 is the Best DIY laser cutter and engraver machine for beginners/business starter/ hobbyists/designers/home-makers/professionals. It adopts the latest high power 5-7.5W laser module with 0.08mm ultra-fine compressed spot, cutting speed up to 10000mm/min, can cut 8mm wood board and 3mm acrylic in one pass, directly engrave uncoated stainless steel.
  • 【Higher Accuracy Cutter and Engraver Machine】The all-steel wheel and shaft and synchronous belt enable motion accuracy of up to 0.01 mm and repeatable positioning accuracy of less than 0.02 mm, allowing the xTool D1 laser engraving machine to engrave and cut all details of design drawings 1-to-1 with high silence throughout. It maintains a perfect engraving effect even after long times use.
  • 【All in One Kit】These xTool D1 kit comes with the xTool D1 laser cutter and engraver machine, rotary attachment and laser material Box. With a rotary attachment, xTool D1 can engrave diameter cylinders as small as 3mm. The laser material box include 10 kinds of popular materials, including metal, wood, rubber, etc. You can start your creation quickly with xTool D1 Rotary attachment and Materail kit.
  • 【Wide Compatibility and Multiple Connection W....
Check Stock

Comgrow Z1 Laser Engraver 10W Output Power, 24V Desktop 48W Laser Cutter and Engraving Machine with Eye Protection Compressed Laser Spot 0.08mm, 10000mm/min Diode Laser Cutting for Metal Wood

  • 【DUAL Y-AXIS MOTOR】: The Y-axis of acrylic engraving machine is extremely smooth and extremely mobile. Not only provides almost unbelievable speed when engraving but also increases the stability and accuracy of the project..
  • 【Extensive software adaptability & Multiple connection methods】：Z1 laser engraver can be compatible with various mature engraving software, LightBurn for experirenced laser user and LaserGRBL for new laser user. LaserGRBL Support Win 7 / Win 8/ Win 10/Win XP,LightBurn supports window /Mac /Linux system.And you can transfer data via Wi-Fi, USB cable, and SD card and use Z1 laser cutter and engraver machine anytime and anywhere..
  • 【SUPPORT EXPANSION】: This device It can be upgraded with Comgrow rotary roller, perfect for engraving tumblers and cylindrical objects! It has a stable design for multiple diameters. Spacing between the two rotary axes ranges from 8mm(0.31in) to 86mm(3.9in). You can engrave angthing you want..
  • 【quality assurance & Easy to use】The Z1 laser engraver can usually be assembled in 10-20 minutes. The new laser head comes with a focusing plate, allowing you to quickly and easily adjust the focus without any tools. In addition, we provide customers with one-year free parts replacement ....
Check Stock

LaserPecker L1 Laser Engraver, Mini Engraving Machine Portable Laser Etcher, Compressed Spot High Precision Grabadora Laser with Protective Goggles - Black

  • The Most Useful Mini Laser Engraver: Do you want to create inspiration anytime at home? Or want to make exclusive gifts for your friends and family during the holiday season? Or want to customize your logo in small batches? LaserPecker L1 Laser Engraver meet your needs!.
  • LaserPecker L1 Laser Engraver: 0.3mm Compressed Spot, engraving range: 3.9″*3.9″. Focal length: 7.5″(the distance from laser unit to the surface of engraved item). Support power supply through 5V 2A mobile power supply. COULD ENGRAVEING: Wood, Kraft paper, Leather, Fruit, Felt etc. COULDN’T ENGRAVEING: Metal, Glass, plastic, stone..
  • Compact Design: LaserPecker L1 Engraving Machine is very small size, only 2.6″ * 2.4″ * 2.1″, Weight 6 oz, can be mastered in one hand, it is a real handheld laser engraving machine. Perfect for entry-level creators, you can do a lot of inspiration without expensive prices and taking up less space..
  • Durable and Safe: Laser etching machine with high quality 1.6W laser head make durablity, better stability and long working time. Multiple safety features such as Working warning alert, Displacement automatically stops when engraving, Overheat shutdown, Enter password before work will keep you safe from accidents. Safe Certification: CE, FCC, FDA, R....
Check Stock

SCULPFUN Laser Engraver Enclosure with Vent, Fireproof Laser Cutter Protective Cover, Smoke & Odor Insulation, Noise Reduction, Eye Protection, Suitable for Most Laser Engraving Machine, 700x700x460mm

  • 【High Strength Fireproof Material】The laser engraver enclosure is made of high-quality double-sided silicone coated Plexiglas fiber that can withstand temperatures up to 1832°F (1000°C) and is resistant to instantaneous high temperatures. Please watch the video, we tested with fire for a few minutes without any problem..
  • 【Large Size & Wide Applicability】Extra large space for laser engraving machine protection cover (700*700*460mm/27.5*27.5*18in). Higher than other laser enclosure, can be used for laser rotary roller engraving taller objects. Compatible with most engraving machines on the market, such as fiber/co2/k40 laser engraver, as long as the size is within this range..
  • 【Eyes Protection & Slanted Viewing Design】Laser cutter enclosure viewing window size 53x60mm (20.8*23.6inch), made of double-layer dark PVC material, which can reduce the blue light produced by laser engraving and protect your eyes. The beveled design of the laser enclosure allows you to better observe the machine operation, giving you a good laser engraving experience..
  • 【Noise Reduction, Smoke & Odor Insulation】The laser enclosure isolates 99% of dust particles, smoke, odors, and noise during the cutting and engraving process. Ensuring your safe and healthy laser ....
Check Stock

USB Cordless Electric Engraving Pen Kit, Mini 3-Speed Rotary Etching Machine Engraving Jewelry Leather Wood Glass,42pcs Engraver Tools for Metal with 30 Bits&Stencil

  • Portable USB Engraver:These engraving tool powered by USB interface. Cordless using will be up to 60 minutes idling after full charge. Easy to help you finish better engraved craft and outdoor working..
  • 3-Speed&High Quality:3 position adjust rotation speed from 5000-25000 r/min to apply different requirements. The lowest speed will let you polishing your nail in safe, the highest speed are also working on metal carving.Metal engraver pen equips with excellent motor,heat dissipation design,qualify circuit chip to allow long time using..
  • Various Bits for Beginner:these engraving rotary tools kit include 30 grinding bits, 2 drill bits, 3 saw blades,1 tungsten steel bit,4 words stencil. The tungsten steel bit own 91HRA hardness,which special sharp on metal and glass.all these are easy for beginner to work on engraving, carving, sanding, polishing, etching, routing, grinding, drilling, cutting..
  • Start Engraving Now:Our metal engraving machine fit for almost all material surface as long as you choose right bits,on metal, glass, ceramic, leather, wood,jewelry,stone ,jade or statue.they are convenience to take anywhere and....
Check Stock