Top Plastic Extrusion Mould

Kibbeh Maker Meatball Mold Manual Meatloaf Maker Press Tool Meatball Mould Kibbeh Maker Mold 4 Grids icli kofte kalibi Meatball Size 3.15×1.77inch

  • Making stuffed meatballs is much easier now. It is simple to use, anyone can use it very easily. 4 meatballs can be made at the same time. You only....
  • Save your time. Kibbeh maker is simple to use, just put a plastic bag on it, then fill and press it. No sticky fingers and no rolling the meat in your....
  • It is made of hard Composite Polymer material. The product consists of 3 parts. Lower mould, upper mould and pressing mould. Kibbeh maker mold is....
  • Does not contain any substances that are hazardous to health. 100% BPA Free..
  • Easy to clean. The simple design makes it easy to clean. It can be washed with soap and warm water and dishwasher safe..
Check Stock

Adjustable Chocolate Funnel for Baking Cake Decorating Tools, Plastic Candy Batter Funnel Mold Easy Pour Funnel White

  • Material: High quality plastic, durable and healthy..
  • Size: Funnel bottom dia: 9.5mm/5.5 inch. Funnel height: 13.5 cm/5.3 inch.
  • One-handed operation: You can operate it just one hand, the push-botton control flow easily..
  • It could be used as cake mould, ice mould frozen tool and other kitchen tools..
  • Package includes one adjustable funnel. Easy to control flow..
Check Stock

3Pcs 14mm OD Hard Rigid Tube Bender Mould Tool Kit, Rigid Tubing 45/90/180 Degree Bending Kit, Acrylic Bending Jig Set, Hard Pipe Bend Die Tube Tool Suitable for Water Cooling System

  • 【Bender Mould】3Pcs Hard Rigid Tube Bender Mould Kit is mainly used for angle setting. Heat the hard tube to a certain degree, then place the tube on the grinding tool at different angles to shape it, and the required angle can be bent.
  • 【Wide Application】Hard tube/Acrylic tube bending tool set. Multi-angle acrylic bending mould for AWGM3 series, each group with a total of three. 45/90/180 curvature, suitable for 14mm rigid tubes.
  • 【High Quality】 The tube bender is made of ABS plastic material, the angle of the positioning groove is precise, and the molds are mirror polished to ensure the best contact effect between the finished product and the tube body.
  • 【Bending Tool】It is convenient and simple, a good helper for hot folding. The bending kit is an ideal tool for professionals and beginners, measuring / cutting / heating / bending. Need enough heat to bend (such as a heat gun).
  • 【Note】This bending mould set is suitable for 14mm rigid tube, please check it before use. The heat gun must be used in a ventilated place, wear protective gloves and goggles. If you have any questions, please contact us.
Check Stock

Wallpaper Smoothing Tool Kit, Adhesive Wallpaper Install Tool Kit Include 2 Scrapers,Craft Knife with 5 Replacement Blades for Adhesive Contact Paper and Wallpaper Paste Applications

  • [WALLPAPER SMOOTHING TOOL KIT]DURABLE MATERIAL: The scraper is made of durable plastic material and the craft knife is made of alloy steel with 5 alloy steel blades. Very easy to use..
  • [WALLPAPER SMOOTHING TOOL KIT]SIZE: The blue scraper is 5.1inchX 3.14inch, and the red scraper is 7.67inchX 4.3inch.Precision cutting process knife.
  • 5 additional blades can be replaced when the knife becomes dull..
  • [WALLPAPER SMOOTHING TOOL KIT]ERGONOMIC DESIGNS: Blue extrusion tool with black felt design, large size red extrusion tool for human hand engineering design, very time and energy saving, very suitable for novice installers and professionals..
  • [WALLPAPER SMOOTHING TOOL KIT]MULTIPLE USES: The red extrusion tool is perfect for large area applications, and the blue extrusion tool is suitable for applying seams, corners and edges to wallpaper, effectively smoothing wrinkles and bubbles to make the most of your wallpaper. Craft knife With replaceable 5 blade craft cutter, suitable for your different DIY home projects..
  • [WALLPAPER SMOOTHING TOOL KIT]APPLICASION OCCASIONS: Wallpaper Smoothing Tool Kit is ideal for any home project, suitable for a variety of Wallpaper applications, vinyl stickers and glass films to make your project easier..
Check Stock

WELDY 3400W Handheld Plastic Extrusion Welding Machine kit Hot Air Plastic Welder Gun Vinyl Weld Extruder Welder Machine EX2 EX3 EX3

  • ...ges]:1:Output max. 2.2Kg/h. Ideal for upright work.
  • 4:100 % quality, function and safety check.
  • 5:For parts included with purchase check different versions.
  • 6:On both sides easy to insert welding rods (3 and 4mm) for flexible welding positions.
  • 7:Locking button for continuous extrusion welding with little effort.
  • 8:Quickly replaceable welding shoes result in high productivity.
  • 3.[Application]:WELDY booster EX3 - The powerful extrusion welder. The professional extrusion welder for plastic fabrication and civil engineering. Best in class!.
  • 4.[Warranty]:Warranty in one year (not include the heat element)..
  • 5.[Introduction]: Weldy started its business activities in 1997 to complement the Leister Product Portfolio with simple Hot-air-guns to serve the “Do-it-yourself” markets as well as to enable business opportunities with Private Label partners Already in 2007 Weldy enlarged its product portfolio by including functional plastic welding tools to serve the local requirements in China as well as to expand into Emerging Markets and selective countries..
Check Stock

LOVEINUSA Ice Cream Mold Set, Square Cakesicle Mold Small Popsicle Molds 50 Wooden Sticks for DIY Ice Cream Cake Mousse Dessert

  • PACKAGE INCLUDED - 1 x Square Chocolate-like Popsicle Mould, 1 x Classic Popsicle Mould, 50 x Wooden Stick, each mould has 4 cavities, suitable for both kids and adults..
  • SIZE - Chocolate-like Mould: 10.25 x 5.75inches, Classic Mould: 8.4 x 4.8inches, Popsicle Stick: 4.5inches (L), Cavity of Chocolate-like Mould: 1.9 x 3.1inches, Cavity of Classic Mould: 1.5 x 2.75inches.
  • PREMIUM QUALITY - Our Ice Pop Molds are all made of food-grade silicone, eco-friendly and BPA free, can stand with the temperature ranging from -40-230 degrees Celsius. Can be put in the fridge and oven. Washable and dishwasher safe..
  • PERFECT DESIGN - Our popsicle molds are compact and easy to store. Stackable in the fridge, room-saving and easy to clean up, labor-saving. Easy to pop the popsicle out when frozen. Lightweight and reusable, designed for long-term use..
  • VARIOUS APPLICATIONS - Our popsicle mould is not only perfect for all kinds of ice creams making but also for freezing fruit, cakesicle, mousse and other desserts making. Suitable for both refrigerator and oven..
Check Stock

4 Pack Tray Silicone Molds

  • What you will receive: the package comes with 5 pieces of round coaster resin moulds, 5 pieces of square coaster resin moulds, 2 pieces of silicone coaster storage box mould in rectangle and round, sufficient quantities and proper combinations will satisfy your various DIY needs in daily life.
  • Quality material: these epoxy casting moulds are made of silicone material, they are lightweight, reliable and reusable, they can withstand temperature from minus 40 to 446 degrees Fahrenheit, you can use them for a long time, and they are non-toxic, safe and tasteless, easy to clean with warm soapy water.
  • Simple to use: our round and square resin moulds set has smooth interior, so they are easy to demould, you just need to put the required filler into the mould, wait a while until the resin is completely cured, and gently twist the mould to push it out without tearing easily, while maintaining the shape of the mould.
  • Size of products: the diameter of round craft resin coaster mould is approx. 9 cm/ 3.54 inches, the size of the square coaster silicone mould is approx. 9 x 9 cm/ 3.54 x 3.54 inches, the round coaster holder silicone mould measures about 4 x 10.5 cm/ 1.57 x 4.13 inches, and the size of rectangle coaster storage box silicone mould is approx. 4 x 7 x 1....
Check Stock

Haldis 3D Extruder DDB Universal Nano Gear Dual Drive 3D Printer Extruder for Ender 3 Pro Ender 5 Pro CR10S Pro Mega S Prusa I3 Other DIY 3D Printer Kits DLC Right

  • 1.【Transparent Design】: Transparent and cool design, double gear extruder, when working, you can watch the printing filament go through to see how....
  • 2.【Dual Gear Extrusion】: Two stainless steel wheels grab the filament from both sides, high extrusion force, ensure smooth feeding and provide....
  • 3.【Adjustable Pressure Spring】: Easily adjust the clamping force of the filament, improved adjustment thumb screw, more comfortable adjustment and....
  • 4.【High Quality Material】: Transparent hard plastic shell and high quality metal extrusion wheel parts, the transparent material looks very....
  • 5.【WIDE COMPATIBILITY】: Compatible with most DIY 3D printers, such as Creality CR10, MK8 V6 CR10 Ender 3 series, Wanhao D9, Anet A8 E10, Geeetech....
Check Stock

5 Pieces Maple Leaf Jewelry Resin Moulds Spice Silicone Mould and Lighter Protective Cover Epoxy Mould Set for DIY Crafts Resin Casting Candle Wax Soap Making Projects Supplies

  • What's included: the package contains 5 pieces resin casting moulds, including 1 piece maple leaf jewelry mould and 2 pieces (1 pair) spice grinder resin moulds and 2 pieces lighter protective cover resin moulds in two size, enough for you to apply and satisfy your various needs.
  • Nice material: these epoxy moulds are made of silicone, which are reliable and easy to release materials, and the mould is not easy to get deformed, washable, please pay attention to blending ratio when adjusting glue.
  • Dimension: the size of maple leaf jewelry mould is approx. 16 x 18 cm/ 6.3 x 7 inches, the diameter of spice grinder resin mould is approx. 6 cm/ 2.4 inches, the size of lighter protective cover resin mould is approx. 6.6 x 3.5 x 2.5 cm/ 2.6 x 1.4 x 0.98 inch and 5.2 x 3.5 x 2.5 cm/ 2 x 1.4 x 0.98 inch, proper sizes are simple for you to operate.
  • How to use: you just need to twist the silicone mould and release your items out of the mould after the resin is completely dry and solidified, no tearing while the mould maintains its shape, so convenient for your DIY crafts.
  • Design your styles: our epoxy casting moulds provide interesting DIY ways for you to make, you can add some dry flowers, sequins, powder or pigments of various colors into the resin mould, or add a ....
Check Stock

Whaline Christams Gingerbread House Baking Tray Silicone Molds for Desserts Chocolate Candy,Cookies 2 Pieces

  • PACKAGE INCLUDE - 2 pieces Christmas theme silicone molds, totally 16 mould pits. Enough quantity and patterns for festive use and daily use. Delicate....
  • 3D HOUSE DESIGN - 2 roof mould pieces and 4 wall mould pieces can used for house building and tree, gingerbread, bird animal mould can stand beside....
  • SAFE MATERIAL - Made of good-quality silicone, our molds are available in ovens, freezers, microwaves and dishwashers. Flexible, non-stick and easy....
  • SIZE - Silicone mould is measuring 28.3x 18.1 x 0.8cm .1inx 7.1in x 0.31in. Each mould pit is suitable for making a chocolate house. You can put the....
  • GREAT FESTIVE DECOR- Perfect for Christmas party, holiday family gathering and new year party. You make chocolate house decor for cake, bakery,....
Check Stock

Silicone Planter Mold for Concrete Flower Pot Making, Square DIY Succulent Plant Cactus Planter Pot Mould, Homemade Cement Flowerpot Molding Tool (Type B - 12CM)

  • 【Concrete Flower Pot Silicone Molds】- 1. This Succulent Pots Mold are consists of ABS plastic hard shell frames and Silicone Inner material. Sturdy outer shell to support concrete weight without wall bulging outwards.
  • 2. The model is used to make Plant pot/ Flower pots/ DIY Flower Pot Model/ planter pot model or some other decorations.
  • 3. Smooth surface, easy to demold (demould need 24-36 hours)/ clean and re-use. (Note: If to make flower pot, please use Cement or concrete)..
  • 【Square Mini Flower Pot Silicone Mould】- 1. Type A (10 CM): Mold Size about 11.2x11.2x10.5cm/ 4.4x4.4x4.13inch (LxWxH), Flower Pot Finished product size: 10x10x10cm/ 3.9x3.9x3.9inch (LxWxH).
  • 2. Type B (12 CM): Mold Size about 15.5 x15.5x12.3 cm/6.1x6.1x4.8 inch (L x W x H), Finished Product Size: About 12x12x12 cm/ 4.7x4.7x4.7 inch(L x W x H). Perfect for small green leaf plant/ succulent/ Cacti and other mini size plants. DIY Flower Pot Model, add the happy feeling in daily life..
  • 【Multi-usages Flower Pot Making Molds, DIY Silicone Planter Molds for Concrete Succulent Pots Making】- 1. This mold can be used to as cement/ concrete/ clay/ plaster/ polyester resin molding tool, to....
Check Stock

WELDY 3400W Handheld Plastic Extrusion Welding Machine kit Hot Air Plastic Welder Gun Vinyl Weld Extruder Welder Machine EX2

  • The professional and powerful extrusion welder for plastic fabrication and civil engineering. Output max. 2.2 Kg/h. Short and compact.
  • On both sides easy to insert welding rods (3 and 4mm) for flexible welding positions.
  • Locking button for continuous extrusion welding with little effort.
  • Weldy brand belong to Leister, good quality.
Check Stock