Top Plastic Part Moldings

312 Motoring fits 2002-2008 Honda Odyssey Carbon Fiber ROOF Trim MOLDINGS 2PC 2003 2004 2005 2006 2007 02 03 04 05 06 07 08

  • 5-YEAR WARRANTY! If you have any problems with the trim in the next 5 years, we replace it FREE!.
  • NOTE: THIS IS NOT REAL CARBON FIBER. These are carbon fiber, vinyl-wrapped, flexible plastic trim pieces that you place onto your roof or roof's existing moldings. The pieces have a 3M-adhesive strip on the back..
  • You will be required to cut the moldings to the length of your roof (can be done with scissors). Otherwise, just peel and stick..
  • You will receive 2 moldings. The molding is 3/4 inch wide and 72 inches (6 feet) long. PLEASE MEASURE YOUR VEHICLE BEFORE ORDERING AND VERIFY THIS SIZE WILL FIT..
  • Only TWO SETS of these left in stock. Buy now while you can!.
Check Stock

312 MOTORING fits 2006-2012 Toyota Tundra Black ROOF TOP Trim MOLDINGS 2PC 2007 2008 2009 2010 2011 06 07 08 09 10 11 12

  • 5-YEAR WARRANTY! If you have any problems with the trim in the next 5 years, we replace it FREE!.
  • NOTE: THIS IS NOT REAL CARBON FIBER. These are carbon fiber, vinyl-wrapped, flexible plastic trim pieces that you place onto your roof or roof's existing moldings. The pieces have a 3M-adhesive strip on the back..
  • You will be required to cut the moldings to the length of your roof (can be done with scissors). Otherwise, just peel and stick..
  • You will receive 2 moldings. The molding is 3/4 inch wide and 72 inches (6 feet) long. PLEASE MEASURE YOUR VEHICLE BEFORE ORDERING AND VERIFY THIS SIZE WILL FIT..
  • Only TWO SETS of these left in stock. Buy now while you can!.
Check Stock

Gorilla Tough & Wide Duct Tape, 2.88\ x 25 yd, White, (Pack of 1)

  • PERMANENT PRO RESULTS: Permanently attaches side moldings, trim and emblems to the interior and exterior of vehicles..
  • WEATHERABLE: High strength double-sided adhesive withstands weather and impact. Temperature use range is -40F to 250F..
  • EASY TO USE: Cut, apply, press. That's it. No tools required. Avoid mess of liquid adhesives..
  • SUPER CONFORMABLE: 3M VHB tape conforms to irregular and textured surfaces.
  • BOND WITHOUT RIVETS/SCREWS: Aircraft-grade adhesive strength allows for strong metal to metal bonding without rivets..DECREASE NOISE AND VIBRATION: Dampens noise, shock and vibration on your vehicle..DIFFERENT SIZES FOR YOUR PROJECT: Available in several widths and lengths and cuts easily to size.MULTI USE APPLICATIONS: Use to bond auto body, trim, side body moldings, drip rail moldings or fender and wheel trim to add instant protection against door dings and other hazards.USE ON MANY SURFACES: Bonds to plastic, metal, carbon fiber and composite parts to your vehicle's painted or unpainted surfaces.Resists moisture, UV and solvents.
Check Stock

312 Motoring fits 2005-2010 Chrysler 300 300C Chrome ROOF Trim MOLDINGS 2PC 2006 2007 2008 2009 05 06 07 08 09 10 Limited Touring SRT-8 SRT8

  • 5-YEAR WARRANTY! If you have any problems with the trim in the next 5 years, we replace it FREE!.
  • NOTE: THIS IS NOT REAL CARBON FIBER. These are carbon fiber, vinyl-wrapped, flexible plastic trim pieces that you place onto your roof or roof's existing moldings. The pieces have a 3M-adhesive strip on the back..
  • You will be required to cut the moldings to the length of your roof (can be done with scissors). Otherwise, just peel and stick..
  • You will receive 2 moldings. The molding is 3/4 inch wide and 72 inches (6 feet) long. PLEASE MEASURE YOUR VEHICLE BEFORE ORDERING AND VERIFY THIS SIZE WILL FIT..
  • Only TWO SETS of these left in stock. Buy now while you can!.
Check Stock

312 Motoring fits 2005-2010 Chrysler 300 300C Carbon Fiber ROOF Trim MOLDINGS 2PC 2006 2007 2008 2009 05 06 07 08 09 10 Limited Touring SRT-8 SRT8

  • 5-YEAR WARRANTY! If you have any problems with the trim in the next 5 years, we replace it FREE!.
  • NOTE: THIS IS NOT REAL CARBON FIBER. These are carbon fiber, vinyl-wrapped, flexible plastic trim pieces that you place onto your roof or roof's existing moldings. The pieces have a 3M-adhesive strip on the back..
  • You will be required to cut the moldings to the length of your roof (can be done with scissors). Otherwise, just peel and stick..
  • You will receive 2 moldings. The molding is 3/4 inch wide and 72 inches (6 feet) long. PLEASE MEASURE YOUR VEHICLE BEFORE ORDERING AND VERIFY THIS SIZE WILL FIT..
  • Only TWO SETS of these left in stock. Buy now while you can!.
Check Stock

LJ INTERNATIONAL Quality Accessories 4pcs Stainless Steel Window Molding Trims Overlays Compatible with Dodge Durango

  • Genuine Oem: Yes, Category 2: Back Glass, Fitment Footnotes: Diag Ref #2, Quantity Needed: 1.
  • Brand: BMW, Fitment Type: Direct Replacement, Item Name: Upper Molding, Position: Rear Upper.
  • Manufacturer Part Number: 51317061970, Category 3: Reveal Moldings, Part Ref# On Diagram: ONLY PART REFERENCE #2 ON THE DIAGRAM IS, Category 1: Body Hardware.
Check Stock

EnvironMolds Liquid Latex Mold Making Rubber 16-oz.

  • ✅ MULTI-USE latex liquid rubber. Used as a mold-making rubber to make flexible and durable latex molds to reproduce figurines, plaster moldings, statues, plaques, life castings and similar..
  • ✅ NO MIXING – Our one-part, liquid rubber air dries in 2-3 hours. It needs no mixing unlike mold making silicone rubber or even alginate molding powder..
  • ✅ BRUSHABLE APPLICATION—Brush on LayTex to reproduce the finest detail. Use soapy water to clean up and no vulcanization (no high heating) required..
  • ✅ NO RELEASE NEEDED LayTex needs no release on most materials allowing the user to keep his model’s surface clean and free of unwanted materials. Use on models made of metal, clay, plaster, wood, plastic, or glass. Release will be required when you use liquid latex for resin casting..
  • ✅ DURABLE & LONG LASTING LayTex liquid latex molds out last manmade rubber mold such as silicone and polyurethane rubbers. They are durable, reusable, and very economical to make..
Check Stock

Replacement Tailgate Molding Cap for 2006-2018 Dodge Ram - CH1909100

  • SUPERIOR QUALITY & FIT - Dependable Direct offers high quality aftermarket replacement parts at an affordable price. Our Tailgate Moldings conform to the Original Equipment (OE) standards to ensure they operate and fit just like the original.
  • ENSURE CORRECT FITMENT - This is a Tailgate Molding for Rear. This part is not universal, so it's very important to make sure it will fit your vehicle. Check the part reference numbers to make sure they match the part you need. In addition, visually compare the part you are replacing with the images of this Tailgate Molding.
  • PARTSLINK & OE REFERENCE - Partslink Numbers: CH1909100 and OE Numbers: 55372052AH.
  • VEHICLE FITMENT - Please See Fitment Details in the Description Section Below.
Check Stock

Dependable Direct Replacement Tailgate Molding Cap for Chevrolet Silverado GM1909104 (2003, 2004, 2005, 2006, 2007)

  • Superior Quality & Fit - Dependable Direct offers high quality aftermarket replacement parts at an affordable price. Our Tailgate Moldings conform to the Original Equipment (OE) standards to ensure they operate and fit just like the original.
  • Ensure Correct Fitment - This is a Tailgate Molding for Rear. This part is not universal, so it's very important to make sure it will fit your vehicle. Check the part reference numbers to make sure they match the part you need. In addition, visually compare the part you are replacing with the images of this Tailgate Molding.
  • Partslink and OE Reference - Partslink Numbers: GM1909104 OE Number: 15932249.
  • Vehicle Fitment - Please See Fitment Details in the Description Section Below.
Check Stock

Replacement Rear Textured Tailgate Molding Cap for 07-13 Toyota Tundra TO1904101 (2007, 2009, 2010, 2011, 2012, 2013)

  • SUPERIOR QUALITY & FIT - Dependable Direct offers high quality aftermarket replacement parts at an affordable price. Our Tailgate Moldings conform to the Original Equipment (OE) standards to ensure they operate and fit just like the original.
  • ENSURE CORRECT FITMENT - This is a Tailgate Molding for Rear. This part is not universal, so it's very important to make sure it will fit your vehicle. Check the part reference numbers to make sure they match the part you need. In addition, visually compare the part you are replacing with the images of this Tailgate Molding.
  • PARTSLINK & OE REFERENCE - Partslink Numbers: TO1904101 and OE Numbers: 657170C051.
  • VEHICLE FITMENT - Please See Fitment Details in the Description Section Below.
Check Stock

312 Motoring fits 2007-2011 Mazda CX-9 CX9 Chrome Side/Door Trim MOLDINGS 2PC 2008 2009 2010 07 08 09 10 11

  • This item is brand new and comes with a 5-YEAR WARRANTY!.
  • These are flexible plastic trim pieces that you place onto your doors. The pieces have a 3M-adhesive strip on the back..
  • You will be required to cut the moldings to the length of your doors (can be done with scissors). Otherwise, just peel and stick..
  • You will receive 2 moldings. Each molding is 5/8 inch wide and 72 inches (6 feet) long. PLEASE MEASURE YOUR VEHICLE BEFORE ORDERING AND VERIFY THESE....
  • Only TWO SETS of these left in stock. Buy now while you can!.
Check Stock

Genuine Toyota 63318-02040-B0 Sunroof Opening Trim Molding

  • This item is BRAND NEW and comes with a 4-YEAR WARRANTY..
  • Chrome moldings are placed on top of your Altima's existing roof moldings. There is 1 piece for each existing roof molding..
  • These moldings are a classy accent to your car and the same size as your OEM moldings..
  • We only have TWO sets of these left in stock so buy while you still can..
  • Written installation instructions are included. Installation takes only minutes..
Check Stock