Top Plastic Pipe Machie

HEATIT JHSF1 Self Regulating Pre-Assembled Heating Cable 75-feet 120V Roof deicing and Pipe freeze Protection

  • 6 ft. water pipe heating cable, 42 watt, black color.
  • Stops metal and rigid plastic pipes from freezing down to -40°F — built-in thermostat automatically turns heating on when pipe temperature is below 42.8° F (close to freezing) and turns heating off once pipe is warmed to 55.4° F (well above freezing).
  • A single 6 foot heating cable is suitable for 6 foot to 8 foot long pipes that are 3/8 inches to 3/4 inches in diameter, or for 6 foot long pipes that are 1 to 1-1/2" in diameter. NOTE: Use only for water filled plastic (including PEX) or metal pipes. Not for use with anything else, like empty water pipes, fuel lines, hoses, gutters, steam lines, and so on..
  • Features grounded plug with indicator light.
  • Pre-assembled, easy to install using the included instructions. Materials required (not included) are: aluminum foil (recommended for plastic pipe), fiberglass plumbing pipe insulation, fiberglass tape or similar with temperature rating 175° F or higher..
Check Stock

Wooden Tobacco Pipe Stand Rack Case Display Holder for 10 Smoking Pipes Hand Carved by KAFpipeWorkshop from Solid AshTree Wood

  • Plastic Pipe Stand, Display Stand, Pipe Holder for Tobacco Pipe.
  • Material: plastic,Size (H*W): 66 x 40mm/2.6"x1.6"(approx) Quantity: 1 Piece.
  • Show Off All Sides Of Your Pipe,Perfect for gifts..
  • Up-Right Postion,360 Degrees View Of Your Beauty.
Check Stock

Armour Line RP77171 Internal Plastic Pipe Cutter, 1-1/4 in Or Larger Diameter (Single Pack)

  • PLASTIC PIPE CUTTER – Resists rust, corrosion and streaking and comes in a beautiful chrome plated finish..
  • STEEL CUTTER BLADE – Saw tooth hardened steel cutter blade cuts plastic pipe from 1-1/4 in. in diameter..
  • ATTACHES TO POWER DRILL – Steel shaft attaches to power drill..
  • FLUSH CUT – Allows for a flush cut to the ground..
  • REQUIRES – Use on plastic pipe only. Requires a power drill for use..
Check Stock

Ezygrind Inside Pipe Cutter with 1 1/2\ (36mm) Diamond Blade

  • Pipe cutter for cutting plastic pipe 1 1/2" - 3" from the inside..
  • Internal pipe cutter includes 2 Free Flow Guide Wheels that stabilize the blade during cutting..
  • Plumbing tool with reduced cutting vibration for a smooth cutting action..
  • Inside PVC pipe cutter for cutting HDPE and ABS pipe in hard to reach places..
  • Internal PVC pipe cutter comes with a longlife diamond blade that can cut concrete..
Check Stock

Libraton PVC Pipe Cutter, Up to 1-5/8\

  • Premium Set: PVC cutter*1 & replacement blade*3.
  • Wide Application: The PVC cutter is suitable for most plastic pipes, e.g. PVC pipe, PEX pipe, PPR pipe.
  • Working Efficiency: This plastic cutter equipped with ratcheting drive technology and arch angle design to greatly save your strength when cut pipes.
  • Quick Change: You can quick change the blade replacement easily within 10 seconds without any other tools.
Check Stock

Oatey 14052 Retro Master 0.25\-5.75\ Pipe Diameter Roof Flashing 8\ x 8\ Base, Black

  • Slides over pipe - for pitch to 45 degrees.
  • Use silicone sealant between base and surface, and secure with sheet metal screws.
  • Continuous Temperature Resistance to 212 Degree F. Intermittent Temperature Resistance to 275 Degree F..
Check Stock

RecPro RV City Water Fill Inlet | Plastic Flange with Check Valve | Camper | Trailer | Marine (Black) | Made in USA

  • Connects to 1" threaded pipe on the outside.
Check Stock

Vent Systems Air Vent Duct Connector Flange Straight Ventilation Pipe Plastic Ducting Connector Plate for Cooling Heating Ventilation System 8 inches B

  • --High quality-This is our new black 4-inch pipe plastic connector flange for heating and cooling ventilation systems. Used to connect the pipe hose....
  • --Rugged and durable – Our 4-inch flange connectors are made of ABS plastic. This is a high-quality material, known for its toughness and resistance....
  • -Wide range of applications-Our pipe flanges to wall-mounted dryer vents are ideal for piping your tumble dryer, bathroom or kitchen exhaust fans and....
  • --Quick installation-Our 4-inch pipe collar has pre-drilled mounting holes for easy and quick installation. Use 4 M3/M3.5 screws to mount our 4-inch....
  • --Secure Fit-By using our plastic flanges, you can obtain an airtight seal to prevent any cold or hot air from entering your home, thereby reducing....
Check Stock

70 Pieces White Clamp for PVC Pipe Greenhouses for Greenhouse Plant Supplies,Bird Protection,3.1 Inches

  • What you get: you will receive 70 pieces white clamps in the package, with white colors and proper size, sufficient quantity is enough for your daily use and replacement, and you can share them with your friends or neighbors.
  • Size Notice : These 3/4 inch (inner diameter 20mm)clips fits inside diameter 3/4" pipe.
  • Practical application: this PVC pipe plastic clamp is suitable for greenhouse film, net to pipe, quilting frames and more, it is also an ideal choice for building greenhouse, floor covering or other places if needed, so practical in our daily life.
  • Hold material on tubular frame: this clamp is made of PVC material, with nice strength and good toughness, safe and reliable, easy to remove from the greenhouse film, will not break easily.
  • Wide Usage: Ideal for a garden cover up and great for attaching plastic to round pipe. Perfect to use to attach mesh or greenhouse plastic to things like a raised bed hoop house. Great to hold sun screen cloth on plants.
Check Stock

Flange Wizard 42050-T Threaded Two Hole Pins, 1/2" - 1-7/16"

  • 【Size Reference】Fit Pipe Diameter: 2.02 inch/51.5mm. Outer Diameter: 3.34 inch/85mm. Height: 0.51 inch/13mm..
  • 【Reliable Material】This flange pipe cover is made of high-quality PP plastic, high heat resistance, and corrosion resistance fit many occasions. Don't worry about the pipe collar breaking when installing. The ring shape after the installation is no deformation..
  • 【Pipe Cover Decoration Function】When the pipe passes through the wall, it leaves an unsightly surface. Can be masked with a pipe collar, to decorate making the wall and environment..
  • 【Wide Applicatons】The water pipe cover decoration can also be used to protect ladder mounting hardware and cover gaps between the concrete and the hardware..
  • 【Package Includes】1Pc x Pipe Cover Flange.
Check Stock

TECHTONGDA Stone Hammer Crusher Hammer Rock Crush Machine Electric Shatter Grinder 220V Maximum Input size 2.76inch 2.5KW

  • 【Hard Hammer】This hammer of the crusher is made of manganese steel which is much harder than carbon steel..
  • 【Three size of Discharge】Equipped with 3 size of screen which is 0.39inch, 0.24inch and 0.12inch. The size of discharging particle will be 0.39inch, 0.24inch and 0.12inch..
  • 【Powerful Motor】This hammer machie is 220V with a powerful 3KW motor, crushing fast, discharged particle has uniform size..
  • 【Excellent Sealing Performance】Inlet and outlet both has covers so as to prevent dust flying out and keep surroundings clean..
  • 【Application】This machine is applicable to dry or contain less than 20% moisture in coal, ore, rock or other medium hard material. Broken stone does not lose moisture. Rock crusher is used for crushing materials such as pellbes, coal, ceramics, quartz stone, slag and popular in coal, electricity, building materials,and research industries..
Check Stock

Inside Pipe Cutter Internal Plastic Pipe Cutter PVC Pipe Inside Cutter Plumbing Inside Cutter with Grinding Wheel and 6 Replaced Saw Blades, 0.86'',0.98'', 1.25'',1.37'',1.73'',1.96'' in Diameter

  • PVC Cutter Tool: you will receive 1 piece inside pipe cutter, 1 piece grinding wheel and 6 pieces replaceable saw blades, which are nice combinations to help you cut and grind the pipes efficiently, bringing you a lot of convenience.
  • Size Information: our inside cutters for plastic pipe measures 10.5 x 3 cm/ 4.1 x 1.2 inches, the grinding wheel is 3 cm/ 1.18 inches in diameter, and the saw blades are 5 cm/ 1.96 inches, 4.4 cm/ 1.73 inches, 3.5 cm/ 1.37 inches, 3.2 cm/ 1.25 inches, 2.5 cm/ 0.98 inches and 2.2 cm/ 0.86 inches, can meet your various cutting demands.
  • Practical Cutting Tools: our internal pipe cutter is designed with a serrated blade for fast cutting, and the grinding wheel helps to make the cutting surface smooth and flat with the grinding wheel, can effectively improve your work efficiency.
  • Multiple Purposes: this plastic tubing cutter is appropriate for cute PVC or plastic from the inside and other ordinary pipe cutting tools cannot be cut, ideal for most kinds of plumbing repairs, such as shower drains and so on.
  • Solid and Quality: made of carbon steel in the inner tube, our inside pipe cutter for PVC pipe is sturdy and serviceable, has a high hardness and smooth surface, rustproof and wear resistant, can serve you for a long time.
Check Stock