Top Plastic Profile Upvc Extrusion

PZRT 2020 Series Aluminum Profile Connector Set, 20pcs Corner Bracket,40pcs T-Slot Nuts, 40pcs M5x8 mm Hex Socket Cap Screw Bolt for 6mm Slot Aluminum Profile Accessories

  • 2020 Series Aluminum Profile Connector Set widely used for building industrial aluminum frame structures, 3D printers, CNC Routers, CNC laser cutters, Robotics Projects.
  • Cast Aluminum Corner Bracket used to connect pieces of 20mm aluminum extrusion at a 90 degree angle suitable for most of metric 20 Series Aluminum Profile Extrusion.
  • T-Slot Aluminum Extrusion M5x10 mm Hardware Slide In T-Nuts made from high quality carbon steel Galvanized,surface is plated with nickel for good rust resistance and better performance high hardness and a long service life..
  • High Quality Carbon steel Hex Socket Button Head Bolts Screws Nuts Surface chrome finish Anti-corrosion,rustless,non-pollution and high-hardness.used widely in the home and office appliance, communication equipments, ship assembly and other machinery industry.
  • Package Content: 20pcs 20mm 90 Degree Solid Cast Aluminum Corner Bracket,40pcs Carbon Steel Galvanized M5 x 10mm T-slot Nuts, 40pcs Carbon steel M5x8 mm Hex Socket Cap Screw Bolt.
Check Stock

SENRISE 100 X Transparent Shrink Wrap Film Bag Heat Seal Gift Packing for Homemade DIY Project Packaging Candle Jar Bath Bomb Gift 2235CM

  • EXTRUSION SYSTEM: Gradient mixing type with high-speed energy saving design, extrusion blow moulding machine gradually changed screw with same distance and different deep. Material of screw: High quality nitriding steel 38CrMoAlA,with nitriding surface HV≥800,brittleness≤2. Material of barrel: High quality nitriding steel 38CrMoAlA,with nitriding surface HV≥900,brittleness≤2..
  • DIE HEAD: Head mode of plastic toy extrustion blow molding machine, the continuous extrusion head is designed with material center coming-in type and removing the plastic melting line on the product surface, easily for material or color change, saving the time & material cost with speedy operation..
  • HYDRAULIC SYSTEM: The main hydraulic system of fully automatic precision plastic injection blow moulding machine is mainly composed of motor, pump, pressure regulating valve block, reversing valve blocks, cylinders and oil chillers. It controls platens open & close, carriage up & down, extrusion system up & down, blow pin actions, or even spinning cut and so on..
  • ELECTRICAL CONTROL: The electrical control system of plastic small bottles blowing machine is composed of operation panel, temperature control module, PLC, input & output module, proportion board, contactors, voltage s....
Check Stock

Polar Tangro 2020 Aluminum Profile Extrusion – T Type Black Aluminum Extrusion European Standard Anodized Linear Rail for DIY 3D Printer, CNC Routers, CNC Laser Cutters, Robotics Projects (400mm,4PCS)

  • DURABLE MATERIAL - European standard aluminum profile made of high-strength 6063-T5 material, adapting latest anodizing technology, making the surface smoother and cleaner, and the appearance is more beautiful. High-strength aluminum profiles have good corrosion resistance, wear resistance and oxidation resistance and can be processed, longer service life..
  • SPECIFICATION - 400mm T-type black 2020 extrusion European standard aluminum profile, packing with 4 pcs..
  • MULTI-COMPATIBILITY - Aluminum profile extrusion products are a good linear motion material with adjustable, compatible with all 20 series fasteners and accessories like M3, M4, M5 T nuts, and pulley wheel..
  • WIDELIY APPLICATION - 2020 T Type Extrusions are perfect for DIY 3D printers, CNC routers, CNC laser cutters, robotics projects, etc..
  • 100% SATISFIED - 30 days no reason to return. If you are not satisfied with your product for any reason, just contact us and we will replace the product or refund your order. Our team is always at your service..
Check Stock

ACQUA Misumi HFSB5-2020 Extrusion Frame Kit for VORON 2.4 3D Printer Black Anodized Blind Joints for VORON 2.4 VORON EXTRUSIONS, 350mm

  • Item type: Mechanical Kit/Hardware Parts.
  • Model number:For Misumi HFSB5-2020 extrusion.
  • Type of accessory: For Misumi Voron 2.4 blind joint.
  • Extrusion profile: For misumi HFSB5-2020.
Check Stock

ciciglow Door Lock, Copper Cylinder Lock 3 Keys Home Security Anti Theft Indoor Bedroom Entrance Lock Cylinder Solid Brass Construction, Polished Brass Finish

  • These 6 pin euro profile cylinders are a convenient everyday locking solution.
  • Designed for use on external doors including timber and uPVC which need to be key locked from the inside and outside for security.
  • These cylinders are drill, pick and pull resistant and have a sacrificial cut that increases the level of security against snapping with a predetermined break point.
  • Certified to EN1303:2005 classification code 16-00C30.
Check Stock

Iverntech 4pcs 600mm 2020 V Type Black European Standard Anodized Linear Rail Aluminum Profile Extrusion for DIY 3D Printer and CNC Machine

  • 600mm V type black 2020 extrusion European standard aluminum profile.
  • Compatible with all 20 series accessories like M3, M4, M5 T nuts, and pulley wheel.
  • Aluminum alloy, black anti-oxidation surface treatment.
  • The length of each extrusion is 600mm, packing with 4pcs.
Check Stock

3M 9425/TRL0572 Scotch 9425 Removable Repositionable Tape: 1/2" x 72 yd, Translucent

  • 3M 9425 Removable Repositionable Tape is a translucent UPVC film differentially coated with a removable/repositionable, medium tack, adhesive on one side (back/liner side) and a permanent, high tack, adhesive on the other (face/exposed side). Industries 3M 9425 is used in includes electronics.
  • The medium-tack adhesive allows removal from many foils and films without adhesive residue. In many cases, the tape can be reused numerous times. The user should perform specific tests to determine the product’s suitability for the particular application..
  • The UPVC film carrier on the tape provides differential stability which offers improved handling for laminating and die-cutting. 3M 9425 is used for repositioning or multiple openings and closings and works on a variety of substrates or materials for temporary adhering, affixing, mounting, holding, attaching, and positioning of lightweight materials such as paper, photographic paper, plastics, films, foams, and cardboard..
  • Carrier/Backing: unplasticized polyvinyl chloride (UPVC) film. Adhesive: acrylic. Release Liner: 58# polycoated Kraft paper..
  • Thickness: 5.8 mils (carrier, adhesive) 4.4 ....
Check Stock

Dragon Fruit Trellis Tower Plant Cage Cactus Climbing Support (60-inch/Dark Gray (Schedule 80))

  • Made of durable polypropylene heavy duty plastic..
  • This crown sits on top of a DN40 UPVC pipes..
  • Special engineered to vertically trellis dragon fruit as well as any climbing plant or ornamental tree..
Check Stock

Cabinet Lighting, 4pcs 12" V-Shape Bright LED Light Bars for Under Cabinet, Gun Safe, Locker, Closet, Under Counter, Shelf, Showcase - 1200lm 12W - Pure White (6000K)

  • ▶ Pack of 4 Cool White (6000K) Light Bars Kit - Per light bar costs 3 Watt, delivers 300 lumen , which is 1200 lumens and 12W in total for each kit. reduce 85% energy consumption..
  • ▶ V Shape Light Bars - :Aluminum extrusion profile with right angle for corner, Elegant and low profile for under cabinet corner..
  • ▶ Soft Light on Eye - Frosted diffused cover makes the light eye-care: no glare, uniform luminance. No LED dots. No light glaring..
  • ▶ Premium Quality - the light bars are made of aluminum and plastic, with a rust-proof and corrosion-resistant protective shell, which helps to extend the life of cabinet lights..
  • ▶ Easy Installation - No need to hire anyone to install the lights, install your LED lighting kit in a few easy steps, all accessories are included packing.
Check Stock

Thermaltake 7-bladed 92mm 4-Pins PWM Aluminum Extrusion CPU Cooling Fan for Intel Core i7/i5/i3 (Intel LGA 1200/1156/1155/1150/1151)CLP0556-B

  • Low-profile Gravity i2 has a perfect ratio aluminum extrusion heatsink.
  • Compatibility: Intel Core i7/i5/i3. Intel LGA 1200/1156/1155/1150/1151.
  • Connector: 4-Pins PWM. Compact Size Fan: 7-bladed 92mm fan provides better cooling performance with low noise.
Check Stock

KOOTANS 20-Pack 90 Degree Angle Brackets Interior Joint Corner Bracket for European Standard 2020 Series T Slot 6mm Aluminum Extrusion Profile with Screws and Wrench

  • Package include: 20pcs L joint and 40pcs screws and wrench.
  • 2020 Series Aluminum Profile Connector widely used for building industrial aluminum frame structures, 3D printers, CNC Routers, CNC laser cutters,....
  • Fit European standard 2020 series Aluminum extrusion.
  • Rigid connection, used to connect pieces of 20mm aluminum extrusion at a 90 degree angle.
Check Stock

Dragon Fruit Tree - Live Plant in a 4 Inch Pot - Hylocereous Undatus - Edible Tropical Fruit Plant from Florida

  • Made of durable polypropylene heavy duty plastic..
  • This crown sits on top of a DN40 UPVC pipes..
  • Special engineered to vertically trellis dragon fruit as well as any climbing plant or ornamental tree..
Check Stock