Top Plastic Threaded Fittings

2 Pieces PVC Bulkhead Fitting for Rain Barrels, Aquariums, Water Tanks (3/4 Inch)

  • Function: locking nut is reversed threaded.
  • The Bulkhead Fitting with 4 mm thick silicon seal gasket that will contour to the shape of the round barrels.
  • Size: 47 mm x 58 mm, 3/4 inch, Material: PVC, Color: gray.
  • Applicable models: universal for most rain barrels, water tanks, ponds, or aquariums.
  • Durable and longer lasting PVC versus standard plastic bulkhead fittings.
  • Easy to install: one and done installation, threaded from the front end, commercial and industrial use.
  • You will get: 2 pieces PVC bulkhead fitting in your package, sufficient to use them on your water tanks and you can share them with your family and friends, they are good tools.
Check Stock

Class A Customs | T-7500 | 75 Gallon Fresh Water Holding Tank

  • ...view photos. (Due to the manufacturing process +/- .25" on each measurement).
  • TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and water-tight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT Over-tighten fitting damage will occur – Use plastic threaded fittings, metal threads may damage tank fittings.
  • NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
  • Great extra water storage in RV, pop-up camper, off-road vehicles, concession trailers, hot dog carts, smaller food vendors and portable hand washing sinks. Class A Customs Manufactures this item in the USA in Elkhart, Indiana. Tanks are made in a warehouse clean each tank prior to use to remove any debris, scuffs or marking from the manufacturing process..
Check Stock

Class A Customs | T-6500 | 65 Gallon RV Fresh Water Holding Tank

  • ...view photos. (Due to the manufacturing process +/- .25" on each measurement).
  • TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and water-tight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT Over-tighten fitting damage will occur – Use plastic threaded fittings, metal threads may damage tank fittings.
  • NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
  • Great extra water storage in RV, pop-up camper, off-road vehicles, concession trailers, hot dog carts, smaller food vendors and portable hand washing sinks. Class A Customs Manufactures this item in the USA in Elkhart, Indiana. Tanks are made in a warehouse clean each tank prior to use to remove any debris, scuffs or marking from the manufacturing process..
Check Stock

GASHER 15PCS Brass Pipe Fitting Hex Bushing Reducer Adapter Reducing Hex Nipple 3/8 Inch NPT x 1/4 Inch NPT

  • Reducer Adapter: Premium solid brass with thicker wall, more durable than iron and iron galvanized pipe fittings, 1/4" NPT male pipe x 3/8" NPT female....
  • Reducing Hex Nipple: Reducing hex nipple for connecting two threaded pipes with different diameters. Male National Pipe Taper (NPT) threads for....
  • Hex Bushing: Has a 3/8” male NPT threaded on one end and a 1/4” female NPT threaded on the other for connecting a female and a male pipe or....
  • These fittings are not allowed to be installed for potable water,NPT thread size does not actual diameter, it is only nominal pipe size..
Check Stock

Class A Customs | T-2000 | One (1) RV Fresh Water 20 Gallon Tank, Grey Water

  • ...view photos. (Due to the manufacturing process +/- .25" on each measurement).
  • TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and water-tight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT Over-tighten fitting damage will occur – Use plastic threaded fittings, metal threads may damage tank fittings.
  • NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
  • Great extra water storage in RV, pop-up camper, off-road vehicles, concession trailers, hot dog carts, smaller food vendors and portable hand washing sinks. Class A Customs Manufactures this item in the USA in Elkhart, Indiana. Tanks are made in a warehouse clean each tank prior to use to remove any debris, scuffs or marking from the manufacturing process..
Check Stock

1/2\ Pipe Fitting Elbow, Home TZH DN15 Threaded Cast Black Malleable Iron for Steampunk Vintage Shelf Bracket DIY Plumbing Pipe Decor Furniture (20, 1/2\)

  • ...s elbow are perfect for DIY projects. Can be used to make pipe furniture, pipe clothing racks, pipe shelving, pipe table legs, industrial decor, etc. Constructed with extremely durable material, our cast iron pipe fittings work great without sacrificing functionality..
  • Without DIY Difficulty: These pipe fittings are threaded, just connect the threaded rods or pipes to the elbows, you can easily to build any shape of frame and shelf for a DIY furniture as you like. Don’t need any screws..
  • Your Personal DIY Style: The simple and industrial design complements traditional and contemporary decor. Because of its industrial malleable iron material and rustic design, it will bring your house or store a Loft Retro Industrial charm. Home TZH elbow decoration combined with a little creativity can go a long way to update a lavatory without breaking the wall..
  • 100% MONEY-BACK GUARANTEE - We offer 90 days unconditional refund or replacement service if there are any quality issues. Contact us at any time and we will give you a satisfying answer. Just take a chance of our floor flange and we promise that you will not be disappointed..
Check Stock

Emoshayoga Coffee Filter Basket Durable Filter Basket Strainer Stainless Steel Filter Basket Coffee for Pressure Coffee Machine

  • PVC for corrosion resistance and less weight than fittings made from metals.
  • Basket strainer pipe fitting for adding filtration to a pipe line.
  • Socket weld connection option to allow a smooth bore and better fluid flow, and a female threaded option for connecting to male threaded pipe fittings.
  • Meets NSF/ANSI 61 standards for potable water use.
Check Stock

Home TZH 45-Degree-Elbow, Threaded Cast Black Malleable Iron Elbow for Steampunk Vintage Shelf Bracket DIY Plumbing Pipe Decor Furniture (10, 1/2")

  • ...s elbow are perfect for DIY projects. Can be used to make pipe furniture, pipe clothing racks, pipe shelving, pipe table legs, industrial decor, etc. Constructed with extremely durable material, our cast iron pipe fittings work great without sacrificing functionality..
  • Without DIY Difficulty: These pipe fittings are threaded, just connect the threaded rods or pipes to the elbows, you can easily to build any shape of frame and shelf for a DIY furniture as you like. Don’t need any screws..
  • Your Personal DIY Style: The simple and industrial design complements traditional and contemporary decor. Because of its industrial malleable iron material and rustic design, it will bring your house or store a Loft Retro Industrial charm. Home TZH elbow decoration combined with a little creativity can go a long way to update a lavatory without breaking the wall..
  • 100% MONEY-BACK GUARANTEE - We offer 90 days unconditional refund or replacement service if there are any quality issues. Contact us at any time and we will give you a satisfying answer. Just take a chance of our floor flange and we promise that you will not be disappointed. › See more product details..
Check Stock

Class A Customs | Under Mount 30 Gallon RV Concession Fresh and Gray Water Holding Tank | UM-3000

  • ...view photos. (Due to the manufacturing process +/- .25" on each measurement).
  • TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and water-tight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT Over-tighten fitting damage will occur – Use plastic threaded fittings, metal threads may damage tank fittings.
  • NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
  • Great extra water storage in RV, pop-up camper, off-road vehicles, concession trailers, hot dog carts, smaller food vendors and portable hand washing sinks. Class A Customs Manufactures this item in the USA in Elkhart, Indiana. Tanks are made in a warehouse clean each tank prior to use to remove any debris, scuffs or marking from the manufacturing process..
Check Stock

Value Plastics Press-In Plug, Classic Barb, 3/32\ID Tube, Polypropylene (Pack of 10)

  • Package Dimensions :10.16 Cm L X7.62 Cm W X0.254 Cm H.
  • Value Plastics Manufactures Plastic Tubing Fittings And Connectors To Join Tubing To Commonly-Used Threaded Ports..
Check Stock

Class A Customs | T-10000 | One (1) RV Fresh Water 100 Gallon Tank, Grey Water | Ribbed for Extra Support

  • ...view photos. (Due to the manufacturing process +/- .25" on each measurement).
  • TANK BUILT-IN FITTINGS: (SIX) 1.5" Female NPT Fitting - fitting is sealed and water-tight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT Over-tighten fitting damage will occur – Use plastic threaded fittings, metal threads may damage tank fittings.
  • NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
  • Great extra water storage in RV, pop-up camper, off-road vehicles, concession trailers, hot dog carts, smaller food vendors and portable hand washing sinks. Class A Customs Manufactures this item in the USA in Elkhart, Indiana. Tanks are made in a warehouse clean each tank prior to use to remove any debris, scuffs or marking from the manufacturing process..
Check Stock

TAISHER 2PCS Black PVC 1-1/2 Bulkhead Tank Connector Adapter Fitting with Gasket for Water Tank Rain barrels Aquariums Bathtubs and Sink

  • Product Type: Bulkhead Water Tank Connector, suitable for installation in water tanks, water towers, buckets, fish tanks, etc..
  • Product material: Made of PVC, strength, durable, will not fade, fall off and crack，These fittings are not allowed be installed for potable water use.
  • Sealing: Threaded connection and embedded gasket form a tight seal, not easy to slip and leak..
  • Easy to install: Can be installed in walls, tanks or panels. The bulkhead design makes it easy for accessories to pass through the holes..
  • [Please note] When purchasing pipe fittings, consider the application, as this will affect material type, shape, size, and required durability. Fittings are available threaded or unthreaded, in many shapes, styles, sizes, and schedules (pipe wall thickness).
Check Stock